A mechanically robust anion exchange membrane with high hydroxide conductivity

Abstract As a key component of various electrochemical systems, such as alkaline polyelectrolyte fuel cells (APEFCs), flow batteries and electrolyzers, anion exchange membranes (AEMs) need to be both mechanically robust and highly conductive to hydroxide ions. In this work, a polyelectrolyte with a particular polymer structure was designed by combining phase-separation architecture and a crosslinking strategy to improve both the mechanical properties and hydroxide conductivity. The side chain of this type of polyelectrolyte was incorporated by two quaternary ammonium groups and terminated with a cross-linkable unsaturated bond. After being simply heated at 80 °C for 24 h, the crosslinked AEMs exhibited enhanced tensile strength ranging from 23.1 MPa to 14.7 MPa under hydrated conditions. These values are several times higher than the values of conventional AEMs. As a result of the high flexibility and hydrophilicity of the dual-cation-functionalized side chain, an outstanding hydroxide conductivity was observed (43 mS/cm at room temperature and 88.7 mS/cm at 80 °C). Also considering its good dimensional stability and satisfying alkaline tolerance, this strategy combining phase separation architecture and crosslinking has perfectly solved the several obstacles blocking the development of AEMs and thus possesses a great potential for practical application.

[1]  Liang Wu,et al.  Enhancement of hydroxide conduction by self-assembly in anion conductive comb-shaped copolymers , 2013 .

[2]  Yan-Jie Wang,et al.  Alkaline polymer electrolyte membranes for fuel cell applications. , 2013, Chemical Society reviews.

[3]  Fushi Zhang,et al.  Novel cross-linked anion exchange membranes with diamines as ionic exchange functional groups and crosslinking groups , 2014 .

[4]  P. Kohl,et al.  Crosslinked, epoxy-based anion conductive membranes for alkaline membrane fuel cells , 2010 .

[5]  Xiaocheng Lin,et al.  Alkaline polymer electrolytes containing pendant dimethylimidazolium groups for alkaline membrane fuel cells , 2013 .

[6]  Wenjia Ma,et al.  1,2-Dimethylimidazolium-functionalized cross-linked alkaline anion exchange membranes for alkaline direct methanol fuel cells , 2015 .

[7]  D. Stamatialis,et al.  Anion-exchange membranes containing diamines: preparation and stability in alkaline solution , 2004 .

[8]  B. Peppley,et al.  Anion-exchange membranes composed of quaternized-chitosan derivatives for alkaline fuel cells , 2010 .

[9]  Xiuhua Li,et al.  Alkali resistant cross-linked poly(arylene ether sulfone)s membranes containing aromatic side-chain quaternary ammonium groups , 2015 .

[10]  Yao Li,et al.  A strategy for disentangling the conductivity–stability dilemma in alkaline polymer electrolytes , 2013 .

[11]  Liang Wu,et al.  Aromatic polyelectrolytes via polyacylation of pre-quaternized monomers for alkaline fuel cells , 2013 .

[12]  M. Hickner,et al.  Low-temperature crosslinking of anion exchange membranes , 2014 .

[13]  Nanwen Li,et al.  Ion Transport by Nanochannels in Ion-Containing Aromatic Copolymers , 2014 .

[14]  Hongcheng Sun,et al.  Self-crosslinked alkaline electrolyte membranes based on quaternary ammonium poly (ether sulfone) for high-performance alkaline fuel cells , 2012 .

[15]  Chaoyang Wang,et al.  Solid-state water electrolysis with an alkaline membrane. , 2012, Journal of the American Chemical Society.

[16]  B. Yi,et al.  Crosslinked poly(vinylbenzyl chloride) with a macromolecular crosslinker for anion exchange membrane fuel cells , 2014 .

[17]  F. Schmitt,et al.  Synthesis of anion exchange membranes from cellulose: Crosslinking with diiodobutane , 2011 .

[18]  Tae-Hyun Kim,et al.  Crosslinked poly(arylene ether sulfone) block copolymers containing pendant imidazolium groups as both crosslinkage sites and hydroxide conductors for highly selective and stable membranes , 2014 .

[19]  Liang Wu,et al.  Thermal crosslinking of an alkaline anion exchange membrane bearing unsaturated side chains , 2015 .

[20]  Patric Jannasch,et al.  Poly(phenylene oxide) functionalized with quaternary ammonium groups via flexible alkyl spacers for high-performance anion exchange membranes , 2015 .

[21]  Geng Zhang,et al.  Preparation of anion exchange membranes by an efficient chloromethylation method and homogeneous quaternization/crosslinking strategy , 2013 .

[22]  W. Li,et al.  Cross-linked, ETFE-derived and radiation grafted membranes for anion exchange membrane fuel cell applications , 2012 .

[23]  Nanwen Li,et al.  Cross-linked comb-shaped anion exchange membranes with high base stability. , 2014, Chemical communications.

[24]  Liang Wu,et al.  Improving anion exchange membranes for DMAFCs by inter-crosslinking CPPO/BPPO blends , 2008 .

[25]  Patric Jannasch,et al.  Anion conducting multiblock poly(arylene ether sulfone)s containing hydrophilic segments densely functionalized with quaternary ammonium groups , 2015 .

[26]  P. Jannasch,et al.  Polysulfones with highly localized imidazolium groups for anion exchange membranes , 2015 .

[27]  Nanwen Li,et al.  Highly stable, anion conductive, comb-shaped copolymers for alkaline fuel cells. , 2013, Journal of the American Chemical Society.

[28]  Yaoyao Chen,et al.  Simultaneous Enhancements of Conductivity and Stability for Anion Exchange Membranes (AEMs) through Precise Structure Design , 2014, Scientific Reports.

[29]  Shanfu Lu,et al.  A gemini quaternary ammonium poly (ether ether ketone) anion-exchange membrane for alkaline fuel cell: design, synthesis, and properties. , 2014, ChemSusChem.

[30]  Ertan Agar,et al.  Optimized anion exchange membranes for vanadium redox flow batteries. , 2013, ACS applied materials & interfaces.

[31]  Yaoyao Chen,et al.  High performance anion exchange membranes obtained through graft architecture and rational cross-linking , 2014 .

[32]  M. Guiver,et al.  Naphthalene-based poly(arylene ether ketone) anion exchange membranes , 2013 .

[33]  Zhigang Shao,et al.  High-performance alkaline fuel cells using crosslinked composite anion exchange membrane , 2013 .