Improved photovoltage and performance by aminosilane-modified PEO/P(VDF-HFP) composite polymer electrolyte dye-sensitized solar cells

Abstract A PEO/P(VDF-HFP) composite polymer electrolyte was modified by different amounts of NH 2 -end functional silane (3-amonopropyltriethoxysilane, APTS). Fourier transform infrared (FT-IR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC) were carried out to examine the configuration changes of the polymer electrolyte. The newly formed Si–O–Si network and interactions influenced the ionic conductivity of the APTS-modified polymer electrolyte and also enhanced the connection of the polymer electrolyte with the electrodes of the dye sensitized solar cells (DSSCs). The cyclic voltammograms and electrochemical impedance measurements indicated that the APTS deprotonated the TiO 2 photoanode surface and negatively changed the Fermi energy level and the conduction band edge to the vacuum level. This effectively reduced the interface recombination in the DSSC and improved the open circuit voltage. With moderate APTS content (0.1 M) modification, the DSSC exhibited a 58 mV improvement of photovoltage and an improved performance of 5.08% compared with 3.74% of the original DSSC.

[1]  Michael Grätzel,et al.  TiO2 pore-filling and its effect on the efficiency of solid-state dye-sensitized solar cells , 2006 .

[2]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[3]  Z. Li,et al.  Micro-porous P(VDF-HFP)-based polymer electrolyte filled with Al2O3 nanoparticles , 2005 .

[4]  C. Wan,et al.  Review of gel-type polymer electrolytes for lithium-ion batteries , 1999 .

[5]  G. Tulloch,et al.  Light and energy—dye solar cells for the 21st century , 2004 .

[6]  David Turnbull,et al.  Molecular Transport in Liquids and Glasses , 1959 .

[7]  Joseph T. Hupp,et al.  Energetics of Semiconductor Electrode/Solution Interfaces: EQCM Evidence for Charge-Compensating Cation Adsorption and Intercalation during Accumulation Layer Formation in the Titanium Dioxide/Acetonitrile System , 1995 .

[8]  G. Rao,et al.  Studies on plasticized PEO–lithium triflate–ceramic filler composite electrolyte system ☆ , 2002 .

[9]  Michael Grätzel,et al.  Ion coordinating sensitizer for high efficiency mesoscopic dye-sensitized solar cells: influence of lithium ions on the photovoltaic performance of liquid and solid-state cells. , 2006, Nano letters.

[10]  Michael Grätzel,et al.  Influence of 4-guanidinobutyric acid as coadsorbent in reducing recombination in dye-sensitized solar cells. , 2005, The journal of physical chemistry. B.

[11]  Y. J. Kim,et al.  Supramolecular Electrolytes for Use in Highly Efficient Dye‐Sensitized Solar Cells , 2004 .

[12]  J. Nelson,et al.  Iodide Electron Transfer Kinetics in Dye-Sensitized Nanocrystalline TiO2 Films , 2002 .

[13]  Michael Grätzel,et al.  Alkyl chain barriers for kinetic optimization in dye-sensitized solar cells. , 2006, Journal of the American Chemical Society.

[14]  J. Tarascon,et al.  Plastic PVDF-HFP electrolyte laminates prepared by a phase-inversion process , 2000 .

[15]  Xingzhong Zhao,et al.  The preparation of high-surface-area nanocrystalline TiO2 films using easy-reaggregation particles in solution , 2004 .

[16]  Peng Wang,et al.  A stable quasi-solid-state dye-sensitized solar cell with an amphiphilic ruthenium sensitizer and polymer gel electrolyte , 2003, Nature materials.

[17]  James R. Durrant,et al.  Dye-Sensitized Nanocrystalline Solar Cells Employing a Polymer Electrolyte , 2001 .

[18]  A. Fadeev,et al.  Self-Assembled Monolayers of Organosilicon Hydrides Supported on Titanium, Zirconium, and Hafnium Dioxides , 2002 .

[19]  M. Matyska,et al.  Methods for the Modification and Characterization of Oxide Surfaces , 1997 .

[20]  Arie Zaban,et al.  Core-shell nanoporous electrode for dye sensitized solar cells: the effect of shell characteristics on the electronic properties of the electrode , 2004 .

[21]  H. Xiong,et al.  New Polymer−Inorganic Nanocomposites: PEO−ZnO and PEO−ZnO−LiClO4 Films , 2001 .

[22]  K. Hariharan,et al.  Physical and ionic transport studies on poly(ethylene oxide)–NaNO3 polymer electrolyte system , 2005 .

[23]  J. Grdadolnik,et al.  Novel polysilsesquioxane-I-/I3- ionic electrolyte for dye-sensitized photoelectrochemical cells. , 2005, The journal of physical chemistry. B.

[24]  Spectroscopic studies of the reaction of iodine with 2,3-diaminopyridine. , 2004, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[25]  Kazunori Takada,et al.  Electronic band structure of titania semiconductor nanosheets revealed by electrochemical and photoelectrochemical studies. , 2004, Journal of the American Chemical Society.

[26]  Takayuki Kitamura,et al.  Photocurrent-Determining Processes in Quasi-Solid-State Dye-Sensitized Solar Cells Using Ionic Gel Electrolytes , 2003 .

[27]  A. J. Frank,et al.  Influence of Electrical Potential Distribution, Charge Transport, and Recombination on the Photopotential and Photocurrent Conversion Efficiency of Dye-Sensitized Nanocrystalline TiO2 Solar Cells: A Study by Electrical Impedance and Optical Modulation Techniques , 2000 .

[28]  Joachim Luther,et al.  Modeling and interpretation of electrical impedance spectra of dye solar cells operated under open-circuit conditions , 2002 .

[29]  W. Liu,et al.  A Hybrid Poly(ethylene oxide)/ Poly(vinylidene fluoride)/TiO2 Nanoparticle Solid‐State Redox Electrolyte for Dye‐Sensitized Nanocrystalline Solar Cells , 2005 .

[30]  Xingzhong Zhao,et al.  Ultrasonic irradiation to modify the PEO/P(VDF–HFP)/TiO2 nanoparticle composite polymer electrolyte for dye sensitized solar cells , 2007 .

[31]  M. Paoli,et al.  Polymers in dye sensitized solar cells: overview and perspectives , 2004 .

[32]  Udo Bach,et al.  Increased nanopore filling: Effect on monolithic all-solid-state dye-sensitized solar cells , 2007 .

[33]  Andreas F. Meyer,et al.  Long‐term stability of dye‐sensitised solar cells , 2001 .

[34]  R. Vittal,et al.  Effects of pH of a hybrid gel incorporated with 3-aminopropyltrimethoxysilane on the performance of a quasi-solid state dye-sensitized solar cell , 2007 .

[35]  S. Licoccia,et al.  Controlling the Thermal Polymerization Process of Hybrid Organic−Inorganic Films Synthesized from 3-Methacryloxypropyltrimethoxysilane and 3-Aminopropyltriethoxysilane , 2003 .

[36]  Brian A. Gregg,et al.  Interfacial Recombination Processes in Dye-Sensitized Solar Cells and Methods To Passivate the Interfaces , 2001 .

[37]  A. Arof,et al.  Studies on lithium acetate doped chitosan conducting polymer system , 2002 .

[38]  Josef Salbeck,et al.  Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies , 1998, Nature.

[39]  Moon-Sung Kang,et al.  Oligomer Approaches for Solid-State Dye-Sensitized Solar Cells Employing Polymer Electrolytes , 2007 .

[40]  K. Tennakone,et al.  Dye-Sensitized Solid-State Solar Cells: Use of Crystal Growth Inhibitors for Deposition of the Hole Collector , 2002 .

[41]  H. Tributsch,et al.  Dye sensitization solar cells: a critical assessment of the learning curve , 2004 .

[42]  F. Chang,et al.  Hydrogen bonding effect on the poly(ethylene oxide), phenolic resin, and lithium perchlorate-based solid-state electrolyte , 2004 .

[43]  Young Jin Kim,et al.  Roles of terminal groups of oligomer electrolytes in determining photovoltaic performances of dye-sensitized solar cells. , 2005, Chemical communications.

[44]  Elias Stathatos,et al.  A High-Performance Solid-State Dye-Sensitized Photoelectrochemical Cell Employing a Nanocomposite Gel Electrolyte Made by the Sol–Gel Route , 2002 .