Nonlinear analysis of masonry-infilled steel frames with openings using discrete element method

Abstract Nonlinear numerical modeling of masonry-infilled frames is one of the most complicated problems in structural engineering field. This complexity is attributed to the existence of joints as the major source of weakness and material nonlinearities as well as the infill-frame interaction which cannot be properly modeled using the traditional finite element methods. Although there are many numerical studies available on solid masonry-infilled steel frames’ behavior, however, few researches have been conducted on infilled frames with openings. In this paper a two-dimensional numerical model using the specialized discrete element method (DEM) software UDEC (2004) is developed for the nonlinear static analysis of masonry-infilled steel frames with openings subjected to in-plane monotonic loading. In this model, large displacements and rotations between masonry blocks are taken into account. It was found that the model can be used confidently to predict collapse load, joint cracking patterns and explore the possible failure modes of masonry-infilled steel frames with a given location for openings and relative area. Results from the numerical modeling and previous experimental studies found in the literature are compared which indicate a good correlation between them. Furthermore, a nonlinear analysis was performed to investigate the effect of door frame on lateral load capacity and stiffness of infilled frames with a central opening.

[1]  Jan G. Rots,et al.  Structural Masonry , 2020 .

[2]  C. K. Seah,et al.  A computer model for predicting infilled frame behaviour , 2001 .

[3]  P. Benson Shing,et al.  FINITE ELEMENT MODELING OF MASONRy-INFILLED RC FRAMES , 1997 .

[4]  B. S. Smith,et al.  Lateral Stiffness of Infilled Frames , 1962 .

[5]  Mohsen Ghaemian,et al.  Experimental and analytical investigation into crack strength determination of infilled steel frames , 2006 .

[6]  D. White.  Unified plastic analysis for infilled frames , 1986 .

[7]  Mauricio Sánchez-Silva,et al.  11th European Conference on Earthquake Engineering , 1994 .

[8]  Bernard Amadei,et al.  Response of Masonry Bed Joints in Direct Shear , 1989 .

[9]  Bryan Stafford Smith,et al.  Behavior of Square Infilled Frames , 1966 .

[10]  A A Tasnimi,et al.  INELASTIC BEHAVIOR OF RC COLUMNS UNDER CYCLIC LOADS, BASED ON COHESION AND INTERNAL FRICTION ANGLE OF CONCRETE , 2006 .

[11]  J. L. Dawe,et al.  Behaviour of masonry infilled steel frames , 1989 .

[12]  Khalid M. Mosalam,et al.  Static Response of Infilled Frames Using Quasi-Static Experimentation , 1997 .

[13]  P. Lourenço.  Computational strategies for masonry structures : Proefschrift , 1996 .

[14]  H A Moghaddam,et al.  Lateral Load Behavior of Masonry Infilled Steel Frames with Repair and Retrofit , 2004 .

[15]  Andrei M. Reinhorn,et al.  Modeling of Masonry Infill Panels for Structural Analysis , 1995 .

[16]  José V. Lemos,et al.  Seismic Behavior of Blocky Masonry Structures , 2000 .

[17]  Richard M. Bennett,et al.  In-Plane Behavior of Structural Clay Tile Infilled Frames , 1999 .

[18]  Panagiotis G. Asteris,et al.  THE STATE-OF-THE-ART IN INFILLED FRAMES NUMERICAL MODELS , 2002 .

[19]  K. R. Saxena.  Distinct Element Modelling in Geomechanics , 1999 .

[20]  B Hobbs,et al.  Inelastic Design of Infilled Frames , 1995 .

[21]  Wai-Fah Chen.  Plasticity in reinforced concrete , 1982 .