An optimal vibration control logic for minimising fatigue damage in flexible structures

Abstract One of the most common applications of active control on flexible structures is the mitigation of vibrations to reduce stresses and consequently increase lifetime. However, except for a few particular cases, the fatigue phenomenon has never been taken into account in the design of the control algorithm. Moreover, since fatigue is mainly a local effect, in some cases active control could even worsen the structure's integrity (e.g. consider local damage close to the actuators caused by control strategies requiring high control forces). For this reason, control is not able to achieve the best performance in terms of damage reduction and lifetime maximisation. This paper proposes an optimal active control designed to minimise fatigue damage on the structure. A model of the fatigue phenomenon is introduced and included in the definition of the control parameters. The solution is firstly described from a theoretical point of view and then tested both numerically and experimentally, showing a significant improvement over state-of-the-art techniques.

[1]  Chuen-Chien Lee.  FUZZY LOGIC CONTROL SYSTEMS: FUZZY LOGIC CONTROLLER - PART I , 1990 .

[2]  Baptiste Chomette,et al.  Damage reduction of on-board structures using piezoelectric components and active modal control—Application to a printed circuit board , 2010 .

[3]  Ferruccio Resta,et al.  A Feedback and Feedforward Vibration Control for a Concrete Placing Boom , 2011 .

[4]  Scott J. Johnson,et al.  Balancing fatigue damage and turbine performance through innovative pitch control algorithm , 2012 .

[5]  Ervin Bossanyi,et al.  Wind Turbine Control for Load Reduction , 2003 .

[6]  Antonio Miravete,et al.  Fatigue Damage in Composite Materials , 2002 .

[7]  R. E. Kalman,et al.  A New Approach to Linear Filtering and Prediction Problems , 2002 .

[8]  Bernard Friedland,et al.  Control System Design: An Introduction to State-Space Methods , 1987 .

[9]  Chuen-Chien Lee,et al.  Fuzzy logic in control systems: fuzzy logic controller. II , 1990, IEEE Trans. Syst. Man Cybern..

[10]  K. M. Golos,et al.  Cumulative fatigue damage , 1988 .

[11]  Robert E. Reed-Hill,et al.  Physical Metallurgy Principles , 1972 .

[12]  Alan Wright,et al.  Design of Controls to Attenuate Loads in the Controls Advanced Research Turbine , 2004 .

[13]  Richard B. Vinter,et al.  Optimal Control , 2000 .

[14]  John W. Miles,et al.  On Structural Fatigue Under Random Loading , 1954 .

[15]  R. E. Kalman,et al.  New Results in Linear Filtering and Prediction Theory , 1961 .

[16]  P. C. Paris,et al.  The fracture mechanics approach to fatigue. , 1964 .

[17]  A Gholizad,et al.  PASSIVE VIBRATION CONTROL FOR FATIGUE DAMAGE MITIGATION IN STEEL JACKET PLATFORMS , 2008 .

[18]  Darrell F. Socie,et al.  Simple rainflow counting algorithms , 1982 .

[19]  José Costa,et al.  Fatigue life evaluation for carbon/epoxy laminate composites under constant and variable block loading , 2009 .

[20]  Asok Ray,et al.  Damage-mitigating control: an interdisciplinary thrust between controls and material science , 1994, Proceedings of 1994 American Control Conference - ACC '94.