Buckling of slender prismatic circular columns weakened by multiple edge cracks

The investigation of the effects of cracks or similar weaknesses on the load carrying capacity of structural elements such as columns, beams and shells is an important problem in civil, mechanical and aerospace engineering. In this paper, the buckling of slender prismatic circular columns with multiple non-propagating edge cracks is studied by use of the transfer matrix method. The columns are modeled as an assembly of sub-segments connected by massless rotational springs whose flexibilities depend on the local flexibilities introduced by the cracks. This model enables discontinuity in rotations due to bending moments transmitted by the cracked sections. Eigenvalue equations are established in explicit form for classical columns and written for elastically supported columns. Numerical examples show that the buckling loads are affected considerably by the depths, locations and number of cracks, as expected. In case of a single crack, depending on the support conditions of the columns, the buckling loads show sensitivity or insensitivity to the crack location. For a constant crack depth, a crack located in the section of the maximum bending moment causes the largest decrease in the buckling load. In the study, modifications to take into account the intermediate elastic supports are also presented.

[1]  Z. Bažant,et al.  Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories , 1993 .

[2]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[3]  Cecilia Surace,et al.  Natural frequencies of a bar with multiple cracks , 2004 .

[4]  M. Arif Gürel,et al.  Buckling of Slender Prismatic Columns with a Single Edge Crack under Concentric Vertical Loads , 2005 .

[5]  D. Y. Zheng,et al.  Vibration and stability of cracked hollow-sectional beams , 2003 .

[6]  K. B. Subrahmanyam,et al.  UNCOUPLED FLEXURAL VIBRATIONS OF STRAIGHT BEAMS WITH ALL POSSIBLE BOUNDARY CONDITIONS TREATED BY A TRANSFER MATRIX METHOD , 1997 .

[7]  Nihon Chōchū Kenkyū Iinkai.  Handbook of structural stability , 1971 .

[8]  M. L. Kikidis,et al.  Slenderness ratio effect on cracked beam , 1992 .

[9]  I. Takahashi,et al.  Vibration and stability of a cracked shaft simultaneously subjected to a follower force with an axial force , 1998 .

[10]  D. Y. Zheng,et al.  Stability of a cracked Timoshenko beam column by modified Fourier series , 2003 .

[11]  C. Y. Wang,et al.  Buckling of a Weakened Column , 2004 .

[12]  Murat Kisa,et al.  Modal analysis of multi-cracked beams with circular cross section , 2006 .

[13]  Qiusheng Li,et al.  Buckling of multi-step cracked columns with shear deformation , 2001 .

[14]  Andrew D. Dimarogonas,et al.  Coupled Longitudinal and Bending Vibrations of a Cracked Shaft , 1988 .

[15]  Andrew D. Dimarogonas,et al.  VIBRATION OF CRACKED SHAFTS IN BENDING , 1983 .

[16]  Lawrence A. Bergman,et al.  Vibration of damaged beams under a moving mass: theory and experimental validation , 2004 .

[17]  J. A. Brandon,et al.  Remark on the Determination of Compliance Coefficients at the Crack Section of a Uniform Beam with Circular Cross-Section , 1994 .

[18]  J. M. Chandra Kishen,et al.  Finite element analysis for fracture behavior of cracked beam-columns , 2004 .

[19]  I. Takahashi.  Vibration and stability of non-uniform cracked Timoshenko beam subjected to follower force , 1999 .

[20]  Andrew D. Dimarogonas,et al.  Coupled vibration of cracked shafts , 1992 .