Thermoeconomic and environmental analysis of solar flat plate and evacuated tube collectors in cold climatic conditions

In the current study, a thermoeconomic analysis of two different solar hot water systems based on two types of flat plate collector (FPC) and evacuated tube collector (ETC) are studied under the cold climate conditions of Iran. The annual solar collector energy output and the collectors' output temperature are calculated using the TRNSYS16 software. As a result, it is found that the inlet temperature and weather conditions are the two major variables which affect the collector performance. Finally, according to the thermal and economic analysis, the performance of ETC system is 41% better than FPC system, and the yearly useful energy gain of ETC is 30% more than that of FPC in cold climate. So, applying ETC in cold climate is recommended. Additionally, this simulation will be extendable and applicable for every zone with any climatic condition.

[1]  Vihang Garg,et al.  Thermal modeling and development of characteristic equations of evacuated tubular collector (ETC) , 2015 .

[2]  I. Zeghib,et al.  Simulation of a solar domestic water heating system , 2011 .

[3]  Gianpiero Colangelo,et al.  Innovation in flat solar thermal collectors: A review of the last ten years experimental results , 2016 .

[4]  Michael Conlon,et al.  Comparative Field Performance Study of Flat Plate and Heat Pipe Evacuated Tube Collectors (ETCs) for Domestic Water Heating Systems in a Temperate Climate , 2011 .

[5]  I. Pop,et al.  A review of the applications of nanofluids in solar energy , 2013 .

[6]  Alireza Hobbi,et al.  Optimal design of a forced circulation solar water heating system for a residential unit in cold climate using TRNSYS , 2009 .

[7]  Ali Abbas,et al.  Multiscale modeling and performance analysis of evacuated tube collectors for solar water heaters using diffuse flat reflector , 2016 .

[8]  Bengt Perers.  COMPARISON OF THERMAL PERFORMANCE FOR FLAT PLATE AND EVACUATED TUBULAR COLLECTORS , 1988 .

[9]  Owura Kofi Amoabeng.  Assessing the feasibility of a solar water heating system based on performance and economic analysis , 2012 .

[10]  Simon Furbo,et al.  Investigation of Thermal Performance of Flat Plate and Evacuated Tubular Solar Collectors According to a New Dynamic Test Method , 2012 .

[11]  Rahman Saidur,et al.  Progress and latest developments of evacuated tube solar collectors , 2015 .

[12]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[13]  Mouna Ben Hamed,et al.  Parametric sensitivity studies on the performance of a flat plate solar collector in transient behavior , 2014 .

[14]  Ameneh Haji Heidari,et al.  Feasibility Study of Liquefied Natural Gas Project for the "South-Pars" Gas Field of Iran , 2013 .

[15]  Soteris A. Kalogirou,et al.  Exergy analysis of solar thermal collectors and processes , 2016 .

[16]  U. Diego-Ayala,et al.  Evaluation of temperature and efficiency in relation to mass flow on a solar flat plate collector in Mexico , 2016 .

[17]  Soteris A. Kalogirou,et al.  The potential of solar industrial process heat applications , 2003 .

[18]  Masud Behnia,et al.  Water-in-Glass Evacuated Tube Solar Water Heaters , 2004 .

[19]  Mustafa Ali Ersöz,et al.  Effects of different working fluid use on the energy and exergy performance for evacuated tube solar collector with thermosyphon heat pipe , 2016 .

[20]  S. Kalogirou.  Solar Energy Engineering: Processes and Systems , 2009 .

[21]  Soteris A. Kalogirou,et al.  Exergy analysis on solar thermal systems: A better understanding of their sustainability , 2016 .

[22]  Saeed Zeinali Heris,et al.  Nanofluids effects on the evaporation rate in a solar still equipped with a heat exchanger , 2017 .