Development of new Al-Cu-Si alloys for high temperature performance

In a quest to develop new light metal alloys that can perform excellently at elevated-temperatures (from 300°C to 400°C), a ternary eutectic Al-Cu-Si alloy was exploited to gain a deeper understand ...

[1]  D. Eskin,et al.  Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys , 2005 .

[2]  Xiangfa Liu,et al.  Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al-Si piston alloys , 2010 .

[3]  Kamanio Chattopadhyay,et al.  High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity , 2009 .

[4]  Xiangfa Liu,et al.  Effect of existing form of alloying elements on the microhardness of Al–Si–Cu–Ni–Mg piston alloy , 2011 .

[5]  X. Hui,et al.  Eutectic Al–Si–Cu–Fe–Mn alloys with enhanced mechanical properties at room and elevated temperature , 2011 .

[6]  R. Thomson,et al.  Mechanical properties of intermetallic phases in multi-component Al–Si alloys using nanoindentation , 2009 .

[7]  J. Eckert,et al.  Multi-phase Al-based ultrafine composite with multi-scale microstructure , 2010 .

[8]  Roger Smith,et al.  Hot stage nanoindentation in multi-component Al–Ni–Si alloys: Experiment and simulation , 2008 .

[9]  H. Mancha,et al.  Effect of temperature on the tensile properties of an as-cast aluminum alloy A319 , 2007 .

[10]  Xiangfa Liu,et al.  Evolution of nickel-rich phases in Al–Si–Cu–Ni–Mg piston alloys with different Cu additions , 2012 .

[11]  A. Samuel,et al.  The ambient and high temperature deformation behavior of Al–Si–Cu–Mg alloy with minor Ti, Zr, Ni additions , 2014 .

[12]  H. Mancha,et al.  Temperature effects on the tensile properties of cast and heat treated aluminum alloy A319 , 2009 .

[13]  S. K. Shaha,et al.  Microstructure and mechanical properties of Al–Si cast alloy with additions of Zr–V–Ti , 2015 .

[14]  W. Kasprzak,et al.  Development of Aluminium Alloys for High Temperature Applications in Diesel Engines , 2009 .

[15]  L. Höglund,et al.  Thermo-Calc & DICTRA, computational tools for materials science , 2002 .