Evaluation of planarization capability of copper slurry in the CMP process

The evaluation methods of planarization capability of copper slurry are investigated. Planarization capability and material removal rate are the most essential properties of slurry. The goal of chemical mechanical polishing (CMP) is to achieve a flat and smooth surface. Planarization capability is the elimination capability of the step height on the copper pattern wafer surface, and reflects the passivation capability of the slurry to a certain extent. Through analyzing the planarization mechanism of the CMP process and experimental results, the planarization capability of the slurry can be evaluated by the following five aspects: pressure sensitivity, temperature sensitivity, static etch rate, planarization efficiency and saturation properties.

[1]  K. Drescher,et al.  Endpoint detection method for CMP of copper , 1999 .

[2]  J. Chun,et al.  Effect of Slurry Selectivity on Dielectric Erosion and Copper Dishing in Copper Chemical-Mechanical Polishing , 2004 .

[3]  M. Fayolle,et al.  Copper CMP evaluation: planarization issues , 1997 .

[4]  Hyunseop Lee,et al.  Mechanical effect of process condition and abrasive concentration on material removal rate profile in copper chemical mechanical planarization , 2009 .

[5]  P. Woerlee,et al.  Dependency of dishing on polish time and slurry chemistry in Cu CMP , 2000 .

[6]  D. Roy,et al.  Chemical mechanical planarization of copper using abrasive-free solutions of oxalic acid and hydrogen peroxide , 2007 .

[7]  Roel Daamen,et al.  Impact of different slurry and polishing pad choices on the planarization efficiency of a copper CMP process , 2004 .

[8]  Ye Tianchun,et al.  Effects of pattern characteristics on copper CMP , 2009 .

[9]  D. Roy,et al.  Achievement of high planarization efficiency in CMP of copper at a reduced down pressure , 2009 .

[10]  Ronald J. Gutmann,et al.  Damascene copper interconnects with polymer ILDs , 1997 .

[11]  L. Yuling,et al.  An advanced alkaline slurry for barrier chemical mechanical planarization on patterned wafers , 2012 .

[12]  A. Thamm,et al.  Overview of dual damascene integration schemes in Cu BEOL integration , 2008 .

[13]  Su Jianxiu,et al.  Material removal rate of 6H-SiC crystal substrate CMP using an alumina (Al2O3) abrasive , 2012 .