An observer‐based fault tolerance control system with a static filter and its application to high‐rise buildings

[1]  Yaqi Hu,et al.  Active structural control of a floating wind turbine with a stroke-limited hybrid mass damper , 2017 .

[2]  Ying Wang,et al.  An observer-based fault-tolerant controller for flexible buildings based on linear matrix inequality approach , 2018 .

[3]  Carlos-Manuel Astorga-Zaragoza,et al.  Sensor fault compensation via software sensors: Application in a heat pump's helical evaporator , 2015 .

[4]  J. Teng,et al.  Influence analysis of time delay to active mass damper control system using pole assignment method , 2016 .

[5]  Kay Smarsly,et al.  Decentralized fault detection and isolation in wireless structural health monitoring systems using analytical redundancy , 2014, Adv. Eng. Softw..

[6]  Yu Cui,et al.  Design and analysis of robust fault detection filter using LMI tools , 2009, Comput. Math. Appl..

[7]  Jakob Stoustrup,et al.  Robust and fault-tolerant linear parameter-varying control of wind turbines , 2011 .

[8]  Jun Teng,et al.  A multi‐time‐delay compensation controller using a Takagi–Sugeno fuzzy neural network method for high‐rise buildings with an active mass damper/driver system , 2019 .

[9]  Imad M. Jaimoukha,et al.  On-line fault detection and isolation for linear discrete-time uncertain systems , 2014, Autom..

[10]  Hamid Reza Karimi,et al.  An effective computational design strategy for H∞ vibration control of large structures with information constraints , 2018 .

[11]  R F Escobar,et al.  Sensor fault detection and isolation via high-gain observers: application to a double-pipe heat exchanger. , 2011, ISA transactions.

[12]  Hui Li,et al.  Real‐time hybrid simulation approach for performance validation of structural active control systems: a linear motor actuator based active mass driver case study , 2014 .

[13]  Xiang Yu,et al.  A survey of fault-tolerant controllers based on safety-related issues , 2015, Annu. Rev. Control..

[14]  Elsa Caetano,et al.  Use of semi-active tuned mass dampers to control footbridges subjected to synchronous lateral excitation , 2019, Journal of Sound and Vibration.

[15]  Nicolas Boizot,et al.  An adaptive high-gain observer for nonlinear systems , 2010, Autom..

[16]  Chunxiang Li,et al.  Effectiveness of active multiple‐tuned mass dampers for asymmetric structures considering soil–structure interaction effects , 2012 .

[17]  Jinping Ou,et al.  Design and implementation of AMD system for response control in tall buildings , 2014 .

[18]  Zhengtao Ding,et al.  Predictor-Based Extended-State-Observer Design for Consensus of MASs With Delays and Disturbances , 2019, IEEE Transactions on Cybernetics.

[19]  R. F. Escobar-Jiménez,et al.  Fault tolerant system based on non-integers order observers: Application in a heat exchanger. , 2018, ISA transactions.

[20]  Jie Liu,et al.  Vibration control using ATMD and site measurements on the Shanghai World Financial Center Tower , 2014 .

[21]  Satish Nagarajaiah,et al.  Attenuation of a linear oscillator using a nonlinear and a semi-active tuned mass damper in series , 2013 .

[22]  Mohamed Naceur Abdelkrim,et al.  Unknown Input Fault Detection and Isolation Observer Design for Neutral Systems , 2016 .

[23]  D. A. Carbot-Rojas,et al.  EKF based sensor fault diagnosis for an internal combustion engine , 2019, 2019 23rd International Conference on System Theory, Control and Computing (ICSTCC).

[24]  Grace S. Deaecto,et al.  ${\mathcal{H}}_2$ State Feedback Control Design of Continuous-Time Positive Linear Systems , 2017, IEEE Transactions on Automatic Control.

[25]  Steven X. Ding,et al.  State and Disturbance Estimator for Time-Delay Systems With Application to Fault Estimation and Signal Compensation , 2007, IEEE Transactions on Signal Processing.

[26]  José Francisco Gómez-Aguilar,et al.  Experimental validation of an actuator fault tolerant control system using virtual sensor: Application in a double pipe heat exchanger , 2015 .

[27]  M. Gogate.  New Paradigms and Future Critical Directions in Heterogeneous Catalysis and Multifunctional Reactors , 2017 .

[28]  Ying Wang,et al.  A compensation controller based on a regional pole-assignment method for AMD control systems with a time-varying delay , 2018 .

[29]  Jinping Ou,et al.  Modeling and dynamical performance of the electromagnetic mass driver system for structural vibration control , 2015 .

[30]  Gangbing Song,et al.  Experimental studies on the effectiveness and robustness of a pounding tuned mass damper for vibration suppression of a submerged cylindrical pipe , 2017 .

[31]  Gangbing Song,et al.  Seismic Control of Power Transmission Tower Using Pounding TMD , 2013 .

[32]  Derong Liu,et al.  Neural-network-observer-based optimal control for unknown nonlinear systems using adaptive dynamic programming , 2013, Int. J. Control.

[33]  Christopher Edwards,et al.  Fault detection and isolation for nonlinear systems via high-order-sliding-mode multiple-observer† , 2015 .

[34]  Xianghong Li,et al.  Primary Resonance of van der Pol Oscillator under Fractional-Order Delayed Feedback and Forced Excitation , 2017 .

[35]  Lakshminarayanan Samavedham,et al.  A mechanistic fault detection and isolation approach using Kalman filter to improve the security of cyber physical systems , 2018, Journal of Process Control.

[36]  Chunxiang Li,et al.  An optimum design methodology of active tuned mass damper for asymmetric structures , 2010 .

[37]  Juan Li,et al.  Observer-based optimal fault-tolerant control for offshore platforms , 2014, Comput. Electr. Eng..

[38]  Feng Ouyang,et al.  An Elastoplastic Damage Constitutive Model for Cementitious Materials under Wet-Dry Cyclic Sulfate Attack , 2013 .