Analysis of Wind Turbine Simulation Models: Assessment of Simplified versus Complete Methodologies: Preprint

This paper presents the current status of simplified wind turbine models used for power system stability analysis. This work is based on the ongoing work being developed in IEC 61400-27. This international standard, for which a technical committee was convened in October 2009, is focused on defining generic (also known as simplified) simulation models for both wind turbines and wind power plants. The results of the paper provide an improved understanding of the usability of generic models to conduct power system simulations.

[1]  P. Pourbeik,et al.  Generic stability models for type 3 & 4 wind turbine generators for WECC , 2013, 2013 IEEE Power & Energy Society General Meeting.

[2]  Eduard Muljadi,et al.  Development and Validation of WECC Variable Speed Wind Turbine Dynamic Models for Grid Integration Studies , 2007 .

[3]  Francisco Jimenez Buendia,et al.  Validation of a Mechanical Model for Fault Ride-Through: Application to a Gamesa G52 Commercial Wind Turbine , 2013, IEEE Transactions on Energy Conversion.

[4]  Haoran Zhao,et al.  Coordinated control of wind power and energy storage , 2014 .

[5]  Frede Blaabjerg,et al.  Implementation of Electrical Simulation Model for IEC Standard Type-3A Generator , 2013, 2013 European Modelling Symposium.

[6]  Yong Min,et al.  Transient Stability of Wind Turbine Adopting a Generic Model of DFIG and Singularity-Induced Instability of Generators/Units With Power–Electronic Interface , 2015, IEEE Transactions on Energy Conversion.

[7]  Antonio Vigueras-Rodríguez,et al.  Validation of a DFIG wind turbine model submitted to two-phase voltage dips following the Spanish grid code , 2013 .

[8]  E. Gomez,et al.  Wind Turbine Modeling: Comparison of Advanced Tools for Transient Analysis , 2007, 2007 IEEE Power Engineering Society General Meeting.

[9]  Pouyan Pourbeik,et al.  Overview, status and outline of the new IEC 61400 -27 – Electrical simulation models for wind power generation , 2011 .

[10]  Pouyan Pourbeik,et al.  Progress in IEC 61400-27:Electrical simulation models for wind power generation , 2012 .

[11]  A. Molina-Garcia,et al.  Assessment of DFIG simplified model parameters using field test data , 2012, 2012 IEEE Power Electronics and Machines in Wind Applications.

[12]  Pouyan Pourbeik,et al.  Modular structure of wind turbine models in IEC 61400-27-1 , 2013, 2013 IEEE Power & Energy Society General Meeting.

[13]  Haoran Zhao,et al.  Implementation of IEC Generic Model Type 1 Wind Turbine Generators using RTDS , 2012 .

[14]  P. Pourbeik,et al.  Description and technical specifications for generic WTG models — A status report , 2011, 2011 IEEE/PES Power Systems Conference and Exposition.

[15]  Antonio Vigueras-Rodríguez,et al.  Validation of a double fed induction generator wind turbine model and wind farm verification following the Spanish grid code , 2012 .

[16]  Poul Ejnar Sørensen,et al.  Implementation of IEC Standard Models for Power System Stability Studies , 2012 .

[17]  J. MacDowell,et al.  Model Validation for Wind Turbine Generator Models , 2011, IEEE Transactions on Power Systems.

[18]  Haoran Zhao,et al.  Implementation and validation of IEC generic type 1A wind turbine generator model , 2015 .

[19]  Pouyan Pourbeik,et al.  Code Shift: Grid Specifications and Dynamic Wind Turbine Models , 2013, IEEE Power and Energy Magazine.