Efficiency testing of motors powered from pulse-width modulated adjustable speed drives

This is a report of efficiency testing of an induction motor powered from three different pulse width modulated adjustable speed drives. The motor was operated at a range of speeds and torques, and each drive was operated at the highest, lowest, and an in-between carrier frequency. The motor was a typical NEMA design B motor, and the drives were typical, industrial scalar drives using the default volts/Hz setting. The testing showed that the drive efficiencies remained above 90% until torque was lowered to below 20% of rated torque. Combined motor and drive efficiencies remained above 80% until speeds or horsepower loads were lowered to below 20% of rated torque. The test was performed using a unique data acquisition scheme that permitted acquisition of a large number of torque settings for each speed selection.

[1]  D. Macdonald,et al.  A practical guide to understanding bearing damage related to PWM drives , 1998, Conference Record of 1998 Annual Pulp and Paper Industry Technical Conference (Cat. No.98CH36219).

[2]  P. T. Finlayson Output filter considerations for PWM drives with induction motors , 1996, 1996 IEEE Annual Textile, Fiber and Film Industry Technical Conference.

[3]  Clarence A. Phipps Variable speed drive fundamentals , 1994 .