Electrochemical durability of gas diffusion layer under simulated proton exchange membrane fuel cell conditions

An effective ex-situ method for characterizing electrochemical durability of a gas diffusion layer (GDL) under simulated polymer electrolyte membrane fuel cell (PEMFC) conditions is reported in this article. Electrochemical oxidation of the GDLs are studied following potentiostatic treatments up to 96 h holding at potentials from 1.0 to 1.4 V (vs.SCE) in 0.5 mol L � 1 H2SO4. From the analysis of morphology, resistance, gas permeability and contact angle, the characteristics of the fresh GDL and the oxidized GDLs are compared. It is found that the maximum power densities of the fuel cells with the oxidized GDLs hold at 1.2 and 1.4 V (vs.SCE) for 96 h decreased 178 and 486 mW cm � 2 , respectively. The electrochemical impedance spectra measured at 1500 mA cm � 2 are also presented and they reveal that the ohmic resistance, charge-transfer and mass-transfer resistances of the fuel cell changed significantly due to corrosion at high potential.

[1]  M. Fowler,et al.  In-plane and through-plane gas permeability of carbon fiber electrode backing layers , 2006 .

[2]  H. Tang,et al.  PEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode , 2006 .

[3]  Zhiping Luo,et al.  Measurement of water transport rates across the gas diffusion layer in a proton exchange membrane fuel cell, and the influence of polytetrafluoroethylene content and micro-porous layer , 2009 .

[4]  Adam Z. Weber,et al.  Effects of Microporous Layers in Polymer Electrolyte Fuel Cells , 2005 .

[5]  Minkmas V. Williams,et al.  Influence of Convection Through Gas-Diffusion Layers on Limiting Current in PEM FCs Using a Serpentine Flow Field , 2004 .

[6]  Thomas F. Fuller,et al.  Carbon Corrosion Induced by Partial Hydrogen Coverage , 2006 .

[7]  R. Borup.  Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation , 2007 .

[8]  James M. Fenton,et al.  Characterization of Gas Diffusion Layers for PEMFC , 2004 .

[9]  Yongzhu Fu,et al.  Development of novel self-humidifying composite membranes for fuel cells , 2003 .

[10]  Karren L. More,et al.  PEM Fuel Cell Durability With Transportation Transient Operation , 2006 .

[11]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[12]  Sanjeev Mukerjee,et al.  Effects of Nafion impregnation on performances of PEMFC electrodes , 1998 .

[13]  T. Nguyen,et al.  Modeling Liquid Water Effects in the Gas Diffusion and Catalyst Layers of the Cathode of a PEM Fuel Cell , 2004 .

[14]  E. Passalacqua,et al.  Influence of Nafion loading in the catalyst layer of gas-diffusion electrodes for PEFC , 1999 .

[15]  Jiujun Zhang,et al.  A review of accelerated stress tests of MEA durability in PEM fuel cells , 2009 .

[16]  Manuel Maréchal,et al.  From polymer chemistry to membrane elaboration: A global approach of fuel cell polymeric electrolytes , 2006 .

[17]  Robert M. Darling,et al.  Model of Carbon Corrosion in PEM Fuel Cells , 2006 .

[18]  Jiujun Zhang,et al.  Micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[19]  Hubert A. Gasteiger,et al.  The Impact of Carbon Stability on PEM Fuel Cell Startup and Shutdown Voltage Degradation , 2006 .

[20]  A. Shukla,et al.  Diffusion layer parameters influencing optimal fuel cell performance , 2000 .

[21]  G. Squadrito,et al.  Nafion content in the catalyst layer of polymer electrolyte fuel cells: effects on structure and performance , 2001 .

[22]  S. Maaß,et al.  Carbon support oxidation in PEM fuel cell cathodes , 2008 .

[23]  Jinsheng Xiao,et al.  Gas diffusion through differently structured gas diffusion layers of PEM fuel cells , 2007 .

[24]  Trung Van Nguyen,et al.  Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell , 2003 .

[25]  Jianlu Zhang,et al.  A bi-functional micro-porous layer with composite carbon black for PEM fuel cells , 2006 .