Finite Element Modelling and Experimental Investigation of Tensile, Flexural, and Impact Behaviour of 3D-Printed Polyamide

[1]  T. Jagadesh,et al.  Investigations into flexural behavior of additively manufactured short and continuous fiber CFRP composites , 2023, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[2]  Kaijuan Chen,et al.  Effect of build direction on tension-tension low cycle fatigue behavior of polyamide 12 parts printed by Multi Jet Fusion , 2023, International Journal of Fatigue.

[3]  T. Jagadesh,et al.  Applications and Challenges of 3D Printed Polymer Composites in the Emerging Domain of Automotive and Aerospace: A Converged Review , 2022, Journal of The Institution of Engineers (India): Series D.

[4]  M. Rucka,et al.  Tensile failure study of 3D printed PLA using DIC technique and FEM analysis , 2022, Mechanics of Materials.

[5]  G. Liaghat,et al.  Evaluation of the mechanical properties of fully integrated 3D printed polymeric sandwich structures with auxetic cores: experimental and numerical assessment , 2022, The International Journal of Advanced Manufacturing Technology.

[6]  M. Ficko,et al.  Effect of Process Parameters on Tensile Strength of FDM Printed Carbon Fiber Reinforced Polyamide Parts , 2022, Applied Sciences.

[7]  A. Avanzini,et al.  Static and fatigue behavior in presence of notches for polyamide 12 (PA12) additively manufactured via Multi Jet Fusion™ process , 2022, International Journal of Fatigue.

[8]  S. Bull,et al.  Investigation of the effect of raster angle, build orientation, and infill density on the elastic response of 3D printed parts using finite element microstructural modeling and homogenization techniques , 2021, The International Journal of Advanced Manufacturing Technology.

[9]  N. Michailidis,et al.  Novel additively manufactured bio-inspired 3D structures for impact energy damping , 2021 .

[10]  S. Ramakrishna,et al.  Nylon—A material introduction and overview for biomedical applications , 2021 .

[11]  Sumit Paul,et al.  Finite element analysis in fused deposition modeling research: A literature review , 2021 .

[12]  P. Mishra,et al.  An investigation to study the combined effect of different infill pattern and infill density on the impact strength of 3D printed polylactic acid parts , 2021 .

[13]  Lin Sang,et al.  Investigation of processing parameters on tensile performance for FDM-printed carbon fiber reinforced polyamide 6 composites , 2020 .

[14]  Tianxi Liu,et al.  Fused deposition modeling 3D printing of polyamide-based composites and its applications , 2020, Composites Communications.

[15]  Z. Deng,et al.  A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations , 2019, Composites Part B: Engineering.

[16]  F. F. Liou.  Additive Manufacturing Processes , 2019, Rapid Prototyping and Engineering Applications.

[17]  Harshit K. Dave,et al.  Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer , 2018, The International Journal of Advanced Manufacturing Technology.

[18]  Harshit K. Dave,et al.  Flexural strength of fused filament fabricated (FFF) PLA parts on an open-source 3D printer , 2018, Advances in Manufacturing.

[19]  K. Chou,et al.  Microstructure simulations of Inconel 718 during selective laser melting using a phase field model , 2018, The International Journal of Advanced Manufacturing Technology.

[20]  J. M. Chacón,et al.  Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling , 2018, Composites Part B: Engineering.

[21]  A. Achuthan,et al.  A Computationally Efficient Finite Element Framework to Simulate Additive Manufacturing Processes , 2018 .

[22]  Yingtian Li,et al.  Novel Variable-Stiffness Robotic Fingers with Built-In Position Feedback. , 2017, Soft robotics.

[23]  Yong Li,et al.  Measurements of the mechanical response of unidirectional 3D-printed PLA , 2017 .

[24]  A. Bhattacharya,et al.  An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study , 2017 .

[25]  Alexander Tsouknidas,et al.  Impact absorption capacity of 3D-printed components fabricated by fused deposition modelling , 2016 .

[26]  Jordi Llumà,et al.  Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts , 2015 .

[27]  G. L. Samuel,et al.  Mechanistic and Finite Element Model for Prediction of Cutting Forces During Micro-Turning of Titanium Alloy , 2015 .

[28]  Sarat Singamneni,et al.  Raster angle mechanics in fused deposition modelling , 2015 .

[29]  Jean-Pierre Kruth,et al.  Composites by rapid prototyping technology , 2010 .