Is it possible to design a portable power generator based on micro-solid oxide fuel cells? A finite volume analysis

Abstract The inherent limited capacity of current battery technology is not sufficient for covering the increasing power requirements of widely extended portable devices. Among other promising alternatives, recent advances in the field of micro-Solid Oxide Fuel Cells (μ-SOFCs) converted this disruptive technology into a serious candidate to power next generations of portable devices. However, the implementation of single cells in real devices, i.e. μ-SOFC stacks coupled to the required balance-of-plant elements like fuel reformers or post combustors, still remains unexplored. This work aims addressing this system-level research by proposing a new compact design of a vertically stacked device fuelled with ethanol. The feasibility and design optimization for achieving a thermally self-sustained regime and a rapid and low-power consuming start-up is studied by finite volume analysis. An optimal thermal insulation strategy is defined to maintain the steady-state operation temperature of the μ-SOFC at 973 K and an external temperature lower than 323 K. A hybrid start-up procedure, based on heaters embedded in the μ-SOFCs and heat released by chemical reactions in the post-combustion unit, is analyzed allowing start-up times below 1 min and energy consumption under 500 J. These results clearly demonstrate the feasibility of high temperature μ-SOFC power systems fuelled with hydrocarbons for portable applications, therefore, anticipating a new family of mobile and uninterrupted power generators.

[1]  N. Sabaté,et al.  Porous La0.6Sr0.4CoO3−δ thin film cathodes for large area micro solid oxide fuel cell power generators , 2014 .

[2]  Carles Cané,et al.  Electrical characterization of thermomechanically stable YSZ membranes for micro solid oxide fuel cells applications , 2010 .

[3]  J. Martynczuk,et al.  Integration of Spin‐Coated Nanoparticulate‐Based La0.6Sr0.4CoO3–δ Cathodes into Micro‐Solid Oxide Fuel Cell Membranes , 2013 .

[4]  Bo-Kuai Lai,et al.  Scalable nanostructured membranes for solid-oxide fuel cells. , 2011, Nature nanotechnology.

[5]  U. Ozkan,et al.  Complete oxidation of ethanol, acetaldehyde and ethanol/methanol mixtures over copper oxide and copper-chromium oxide catalysts , 1993 .

[6]  Luis Fonseca,et al.  Full ceramic micro solid oxide fuel cells: towards more reliable MEMS power generators operating at high temperatures , 2014 .

[7]  P. Muralt,et al.  Solid oxide fuel cell membranes supported by nickel grid anode , 2008 .

[8]  F. Prinz,et al.  Solid oxide fuel cell with corrugated thin film electrolyte. , 2008, Nano letters.

[9]  H. Sano,et al.  Catalytic combustion of hydrogen I—Its role in hydrogen utilization system and screening of catalyst materials , 1981 .

[10]  C. Sandu,et al.  Nanoporous YSZ film in electrolyte membrane of Micro-Solid Oxide Fuel Cell , 2010 .

[11]  I. Gràcia,et al.  Pinhole-free YSZ self-supported membranes for micro solid oxide fuel cell applications , 2012 .

[12]  L. Mahadevan,et al.  Elastic configurations of self-supported oxide membranes for fuel cells , 2013 .

[13]  L. Gauckler,et al.  Micro Solid Oxide Fuel Cells on Glass Ceramic Substrates , 2008 .

[14]  Agus Haryanto,et al.  Current status of hydrogen production techniques by steam reforming of ethanol : A review , 2005 .

[15]  Alírio E. Rodrigues,et al.  Insight into steam reforming of ethanol to produce hydrogen for fuel cells , 2006 .

[16]  S. Ramanathan,et al.  Low temperature thin film solid oxide fuel cells with nanoporous ruthenium anodes for direct methane operation , 2011 .

[17]  S. Ramanathan,et al.  Nanoscale Compositionally Graded Thin‐Film Electrolyte Membranes for Low‐Temperature Solid Oxide Fuel Cells , 2012 .

[18]  S. Ramanathan,et al.  Energy storage in ultrathin solid oxide fuel cells. , 2012, Nano letters.

[19]  Jennifer L. M. Rupp,et al.  Review on microfabricated micro-solid oxide fuel cell membranes , 2009 .

[20]  D. Poulikakos,et al.  Exergy analysis of a solid oxide fuel cell micropowerplant , 2006 .

[21]  Dimos Poulikakos,et al.  A fast hybrid start-up process for thermally self-sustained catalyticn-butane reforming in micro-SOFC power plants , 2011 .

[22]  S. Ramanathan,et al.  On the role of ultra-thin oxide cathode synthesis on the functionality of micro-solid oxide fuel cells: Structure, stress engineering and in situ observation of fuel cell membranes during operation , 2010 .

[23]  Dimos Poulikakos,et al.  A micro-solid oxide fuel cell system as battery replacement , 2008 .

[24]  Carles Cané,et al.  Residual stress of free-standing membranes of yttria-stabilized zirconia for micro solid oxide fuel cell applications. , 2010, Journal of nanoscience and nanotechnology.

[25]  Dimos Poulikakos,et al.  Fast and exergy efficient start-up of micro-solid oxide fuel cell systems by using the reformer or the post-combustor for start-up heating , 2008 .

[26]  F. Prinz,et al.  Three-dimensional nanostructured bilayer solid oxide fuel cell with 1.3 W/cm(2) at 450 °C. , 2013, Nano letters.

[27]  L. Gauckler,et al.  Analyzing a micro-solid oxide fuel cell system by global energy balances , 2012 .

[28]  J. Martynczuk,et al.  Micro‐Solid Oxide Fuel Cell Membranes Prepared by Aerosol‐Assisted Chemical Vapor Deposition , 2014 .