Enhancing the wettability of PEDOT:PSS layer with plasma treatment method in perovskite solar cells

Organic-inorganic hybrid perovskite solar cells have been widely recognized as an excellent candidate for next-generation photovoltaic devices because of their easy processing and rapidly developing power conversion efficiency (PCE). Owing to the fact that the interface is sensitive to photoelectric conversion properties, many strategies are used to improve the interface wettability between perovskite precursor solution and the hole transport layer (HTL). In this study, we report a method of argon plasma treatment on the poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) layer which could effectively enhance the wettability because of the improvement in the chemical compositions and film morphologies of PEDOT:PSS. In contrast to untreated films, the wettability of PEDOT:PSS is increased by 3.3, 3.6 and 3.7 times based on the optimization of plasma power, treating time, and pressure, respectively. We also systematically described the timeliness of wettability from 0 to 8 hours after plasma treatment. The interface wettability shows a down trend with increasing storage time.

[1]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[2]  Young Chan Kim,et al.  Compositional engineering of perovskite materials for high-performance solar cells , 2015, Nature.

[3]  M. Green,et al.  The emergence of perovskite solar cells , 2014, Nature Photonics.

[4]  S. Zakeeruddin,et al.  A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells , 2016, Science.

[5]  Bernd Rech,et al.  A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells , 2016, Science.

[6]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[7]  Dong Uk Lee,et al.  Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells , 2017, Science.

[8]  Jie Xiong,et al.  Enhancing performance of inverted planar perovskite solar cells by argon plasma post-treatment on PEDOT:PSS , 2017 .

[9]  Heng Ma,et al.  Interface engineering toward enhanced efficiency of planar perovskite solar cells , 2016 .

[10]  Tsuyoshi Murata,et al.  {m , 1934, ACML.

[11]  André Mas,et al.  Improvement of performances of PET track membranes by plasma treatment , 2002 .

[12]  Chang-Qi Ma,et al.  The solvent treatment effect of the PEDOT:PSS anode interlayer in inverted planar perovskite solar cells , 2016 .

[13]  Yang Yang,et al.  On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment , 2004 .

[14]  Myung-Han Yoon,et al.  Significant vertical phase separation in solvent-vapor-annealed poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) composite films leading to better conductivity and work function for high-performance indium tin oxide-free optoelectronics. , 2012, ACS applied materials & interfaces.

[15]  Leone Spiccia,et al.  A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells. , 2014, Angewandte Chemie.

[16]  Jie Zhang,et al.  Mild oxygen plasma treated PEDOT:PSS as anode buffer layer for vacuum deposited organic light-emitting diodes , 2006 .