Design and characterization of an electrothermally driven monolithic long-stretch microdrive in compact arrangement

An electrothermally driven long stretch microdrive (LSMD) is presented for planar rectilinear motions in hundreds of micrometers. Design concept is based on connecting several actuation units in series to form a cascaded structure to accumulate relative displacement of each unit, and two cascaded structures are further arranged in parallel by a connection bar to double output force. The proposed area-saving design features monolithic compliant structure in compact arrangement to achieve long stroke. In experiments, the maximum reversible operating voltage is 3 V. In addition, the voltage-displacement relation shows good linearity within plusmn5% in 0.5-3.0 V. Fabricated nickel LSMD can generate displacement up to 215 mum (W=8 mum, thetas=0.2deg, D=34 mum) at 3 dc volts (669 mW). The maximum operation temperatures of tested LSMDs at 3 V are below 300 degC. Output forces up to 495 muN are measured by in situ passive micromechanical test beams. The LSMD can be operated at 100 Hz without degradation on displacement. Two geometrical design parameters, bent angle and constraint bar width, are also investigated analytically and experimentally

[1]  Yoichi Haga,et al.  Batch fabricated flat meandering shape memory alloy actuator for active catheter , 2001 .

[2]  Ho Nam Kwon,et al.  Design and characterization of a micromachined inchworm motor with thermoelastic linkage actuators , 2002 .

[3]  Mu Chiao,et al.  Electrothermal responses of lineshape microstructures , 1996 .

[4]  M. Sinclair,et al.  A high force low area MEMS thermal actuator , 2000, ITHERM 2000. The Seventh Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.00CH37069).

[5]  Thomas Frank,et al.  The development of cascadable microdrives with muscle-like operating behaviour , 1998 .

[6]  A. Geisberger,et al.  Electrothermal properties and modeling of polysilicon microthermal actuators , 2003 .

[7]  T Tønnesen,et al.  Low-cost post-CMOS integration of electroplated microstructures for inertial sensing , 2000 .

[8]  A micromotion amplifier , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[9]  Timothy W. McLain,et al.  Modeling the thermal behavior of a surface-micromachined linear-displacement thermomechanical microactuator , 2002 .

[10]  M. Madou.  Fundamentals of microfabrication , 1997 .

[11]  Yogesh B. Gianchandani,et al.  High amplification compliant microtransmissions for rectilinear electrothermal actuators , 2002 .

[12]  Jack W. Judy,et al.  Surface micromachined linear thermal microactuator , 1990, International Technical Digest on Electron Devices.

[13]  Y. Gianchandani,et al.  Bent-beam electrothermal actuators-Part I: Single beam and cascaded devices , 2001 .

[14]  L. L. Chu,et al.  Bent-beam electrothermal actuators-Part II: Linear and rotary microengines , 2001 .

[15]  T. Saif,et al.  Optical actuation of a bistable MEMS , 2002 .

[16]  T. Hubbard,et al.  Time and frequency response of two-arm micromachined thermal actuators , 2003 .

[17]  J. Gardner,et al.  Microsensors: Principles and Applications , 1994 .

[18]  William C. Tang,et al.  Laterally driven polysilicon resonant microstructures , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[19]  G. K. Ananthasuresh,et al.  Micromechanical Devices With Embedded Electro-Thermal-Compliant Actuation , 1999, Micro-Electro-Mechanical Systems (MEMS).

[20]  Jong Hyun Lee,et al.  Characterization of a micromachined inchworm motor with thermoelastic linkage actuators , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).