A mathematical model for airflow and heat transfer through fibrous webs

Abstract A mathematical model based on computational fluid dynamics has been developed to investigate the airflow and heat transfer through fibrous webs. The model is based on the porous media concept and involves solving equations for continuity, momentum, and energy. A thermal energy equation is developed, which incorporates the heat of fusion of fibres in the fibrous web. Local flow information such as air velocity, temperature, and melt fraction of fibres is obtained from the simulations. An important outcome of the simulation is the prediction of time required to melt fibres in the web under different working conditions. This information can be used potentially in the design of through-air bonding process for nonwovens manufacturer.

[1]  Jim Barry,et al.  Computational Modeling of Chemical Protective Clothing , 2003 .

[2]  Simulating the Flow Dynamics in Hydroentangling Nozzles: Effect of Cone Angle and Nozzle Aspect Ratio , 2003 .

[3]  H. Tafreshi,et al.  Simulating and Characterizing Water Flows Inside Hydroentangling Orifices , 2003 .

[4]  Haskell W. Beckham,et al.  A model of through-air drying of tufted textile materials , 2002 .

[5]  Through-Air Drying of Unbacked Tufted Carpets , 2001 .

[6]  B. Goswami,et al.  Studies on the Process of Ultrasonic Bonding of Nonwovens: Part 1 — Theoretical Analysis , 2001 .

[7]  Xueqin Wang,et al.  Morphology Gradients in Thermally Point-Bonded Polypropylene Nonwovens , 2001 .

[8]  Single Process Production of 3D Nonwoven Shell Structures: Part 2 — CFD Modeling of Thermal Bonding Process , 2001 .

[9]  Pourmohammadi,et al.  Modelling of an aerodynamic technique of forming web structures in textile industries: I. Turbulent air flow past filters , 2001 .

[10]  Ningtao Mao,et al.  Directional Permeability in Homogeneous Nonwoven Structures Part I: The Relationship between Directional Permeability and Fibre Orientation , 2000 .

[11]  Ningtao Mao,et al.  Directional Permeability in Homogeneous Nonwoven Structures Part II: Permeability in Idealised Structures , 2000 .

[12]  R. H. Gong,et al.  Single Process Production of 3D Nonwoven Shell Structures: Part 1 CFD Modelling of the Web Forming System , 2000 .

[13]  Shri Ramaswamy,et al.  Through-air drying of tissue and towel grades , 1999 .

[14]  Lars Schiøtt Sørensen,et al.  An introduction to Computational Fluid Dynamics: The Finite Volume Method , 1999 .

[15]  Computational Analysis on the Thermal Bonding Behaviour of Bicomponent Fibres , 1999 .

[16]  Shri Ramaswamy,et al.  ANALYSIS OF HEAT AND MASS TRANSFER DURING DRYING OF PAPER/BOARD , 1999 .

[17]  S. Ramaswamy,et al.  HIGH INTENSITY DRYING , 1999 .

[18]  Dipl.-Ing. Alfred Watzl,et al.  INDUSTRIAL THROUGH-AIR DRYING OF NONWOVENS AND PAPER BASIC PRINCIPLES AND APPLICATIONS , 1998 .

[19]  Shri Ramaswamy,et al.  Methods of evaluating through air dryer drying rates , 1998 .

[20]  D. Poirier,et al.  Methods of evaluating hood drying rates , 1996 .

[21]  S. K. Batra,et al.  THERMAL BONDING OF NONWOVEN FABRICS , 1995 .

[22]  V. Voller,et al.  ERAL SOURCE-BASED METHOD FOR SOLIDIFICATION PHASE CHANGE , 1991 .

[23]  S. Warner.  Thermal Bonding of Polypropylene Fibers , 1989 .

[24]  Christoph Beckermann,et al.  Natural convection solid/liquid phase change in porous media , 1988 .