Experimental Study on Ultrasonic Monitoring of Splitting Failure in Reinforced Concrete

This paper investigates inspection of reinforced concrete elements sensitive to the splitting failure. The behaviour of a reinforced concrete specimen subjected to a tensile stress is considered. The damage detection procedure is based on the ultrasonic wave propagation technique. The piezoelectric transducers are located on both ends of the specimen and the measurements are taken periodically during the incrementally increased loading. The features of measured signals in time and frequency domains as well as wavelet transforms before and after the splitting failure are studied. The experimental results show that proposed method can be used for monitoring of damage evolution in concrete elements. The method makes possible detection of the moment just before the splitting failure occurs.

[1]  Pietro G. Gambarova,et al.  Steel-to-concrete bond after concrete splitting: test results , 1989 .

[2]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[3]  S. Mallat.  A wavelet tour of signal processing , 1998 .

[4]  Michael Forde,et al.  Application of infrared thermography to the non-destructive testing of concrete and masonry bridges , 2003 .

[5]  Fabrizio Scarpa,et al.  Structural health monitoring using scanning laser vibrometry: III. Lamb waves for fatigue crack detection , 2004 .

[6]  V. Giurgiutiu.  Structural Health Monitoring: with Piezoelectric Wafer Active Sensors , 2007 .

[7]  W. Staszewski,et al.  Fatigue crack detection in metallic structures with Lamb waves and 3D laser vibrometry , 2007 .

[8]  Bernd Köhler,et al.  Ten Lectures on Impact-Echo , 2008 .

[9]  D. Algernon,et al.  Imaging of the Elastic Wave Propagation in Concrete Using Scanning Techniques: Application for Impact-Echo and Ultrasonic Echo Methods , 2008 .

[10]  Toshikatsu Ichinose,et al.  Analysis of bond splitting failure of deformed bars within structural concrete , 2008 .

[11]  Boris Milmann,et al.  Ultrasonic Imaging Methods for Investigation of Post-tensioned Concrete Structures: A Study of Interfaces at Artificial Grouting Faults and Its Verification , 2008 .

[12]  Maria Anna Polak,et al.  Depth detection of surface-breaking cracks in concrete plates using fundamental Lamb modes , 2009 .

[13]  José María Benítez,et al.  Splitting failure of precast prestressed concrete during the release of the prestressing force , 2009 .

[14]  Hyun-Do Yun,et al.  Acoustic emission activities and damage evaluation of reinforced concrete beams strengthened with CFRP sheets , 2010 .

[15]  Masayasu Ohtsu,et al.  Crack classification in concrete based on acoustic emission , 2010 .

[16]  Rolf Lammering.  Observation of Piezoelectrically Induced Lamb Wave Propagation in Thin Plates by Use of Speckle Interferometry , 2010 .

[17]  Jerzy Hoła,et al.  Nondestructive identification of delaminations in concrete floor toppings with acoustic methods , 2011 .

[18]  M. Rucka.  Modelling of in-plane wave propagation in a plate using spectral element method and Kane–Mindlin theory with application to damage detection , 2011 .

[19]  Michael Pedrick,et al.  Evaluation of ultrasonic inspection and imaging systems for concrete pipes , 2012 .

[20]  María Jesús Casati Calzada,et al.  Evaluation of freeze-thaw damage in concrete by ultrasonic imaging , 2012 .

[21]  Yi-Te Tsai,et al.  Simulation and Experiments of Airborne Zero-Group-Velocity Lamb Waves in Concrete Plate , 2012 .