Computability in non‐linear solid mechanics

The computability of non-linear problems in solid and structural mechanics problems is examined. Several factors which contribute to the level of difficulty of a simulation are discussed: the smoothness and stability of the response, the required resolution, the uncertainties in the load, boundary conditions and initial conditions and inadequacies and uncertainties in the constitutive equation. An abstract measure of the level of difficulty is proposed, and some examples of typical engineering simulations are classified by this measure. We have put particular emphasis on engineering calculations, where many of the factors that diminish computability play a prominent role. Copyright © 2001 John Wiley & Sons, Ltd.

[1]  Ahmed K. Noor,et al.  Sensitivity analysis of the non‐linear dynamic viscoplastic response of 2‐D structures with respect to material parameters , 1995 .

[2]  Ted Belytschko,et al.  On the crucial role of imperfections in quasi-static viscoplastic solutions , 1991 .

[3]  Ted Belytschko,et al.  Arbitrary discontinuities in finite elements , 2001 .

[4]  Jasbir S. Arora,et al.  Nonlinear structural design sensivitity analysis for path dependent problems. Part 1: General theory , 1990 .

[5]  E. Riks The Application of Newton's Method to the Problem of Elastic Stability , 1972 .

[6]  Wing Kam Liu,et al.  Nonlinear Finite Elements for Continua and Structures , 2000 .

[7]  William L. Oberkampf,et al.  Issues in Computational Fluid Dynamics Code Verification and Validation , 1997 .

[8]  Ted Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[9]  R. Haftka,et al.  Structural design under bounded uncertainty-optimization with anti-optimization , 1994 .

[10]  R. L. Harder,et al.  A proposed standard set of problems to test finite element accuracy , 1985 .

[11]  M. Ortiz,et al.  Computational modelling of impact damage in brittle materials , 1996 .

[12]  A. L. Florence,et al.  Dynamic Pulse Buckling: Theory and Experiment , 1987 .

[13]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[14]  M. Crisfield A FAST INCREMENTAL/ITERATIVE SOLUTION PROCEDURE THAT HANDLES "SNAP-THROUGH" , 1981 .