论文信息 - Influence of metal powder characteristics on product quality with directed energy deposition of Inconel 625

Influence of metal powder characteristics on product quality with directed energy deposition of Inconel 625

Abstract Directed energy deposition (DED) for producing a complex shaped metal part has attracted attention in the aerospace industry. However, DED easily causes structural defects such as voids and compositional changes, which results in the deterioration of the mechanical strength of the product. Hence, reducing such defects is essential. In this study, the influence of the powder characteristics of Inconel 625 was focused upon, and the void density and compositional change inside the deposited part were analyzed. The results indicated that a slight amount of carbon in the particle caused void generation and a carbon layer was formed at the surface.

[1] Gideon Levy,et al. RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES , 2003 .

[2] Vojislav Petrovic,et al. Additive layered manufacturing: sectors of industrial application shown through case studies , 2011 .

[3] G. K. Lewis,et al. Practical considerations and capabilities for laser assisted direct metal deposition , 2000 .

[4] F. Klocke,et al. Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[5] J. Mazumder,et al. Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability , 2009 .

[6] K. P. Karunakaran,et al. Low cost integration of additive and subtractive processes for hybrid layered manufacturing , 2010 .

[7] Andrew J. Pinkerton,et al. Advances in the modeling of laser direct metal deposition , 2015 .

[8] A. Nath,et al. Investigating laser rapid manufacturing for Inconel-625 components , 2007 .

[9] Frank W. Liou,et al. An investigation of the effect of direct metal deposition parameters on the characteristics of the deposited layers , 2014 .