Kinematics, singularity and workspace of planar 5R symmetrical parallel mechanisms

[1]  C. Gosselin,et al.  The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator , 1988 .

[2]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[3]  C. Gosselin.  The optimum design of robotic manipulators using dexterity indices , 1992, Robotics Auton. Syst..

[4]  Jean-Pierre Merlet,et al.  Direct Kinematics and Assembly Modes of Parallel Manipulators , 1992 .

[5]  Tatsuo Arai,et al.  A modified Stewart platform manipulator with improved dexterity , 1993, IEEE Trans. Robotics Autom..

[6]  Gao Feng,et al.  A physical model of the solution space and the atlas of the reachable workspace for 2-DOF parallel planar manipulators , 1996 .

[7]  Clément Gosselin,et al.  Singularity loci of planar parallel manipulators with revolute actuators , 1997, Robotics Auton. Syst..

[8]  Jean-Pierre Merlet,et al.  Designing a Parallel Manipulator for a Specific Workspace , 1997, Int. J. Robotics Res..

[9]  Feng Gao,et al.  Performance evaluation of two-degree-of-freedom planar parallel robots , 1998 .

[10]  Clément Gosselin,et al.  Workspaces of Planar Parallel Manipulators , 1998 .

[11]  F. Park,et al.  Singularity Analysis of Closed Kinematic Chains , 1999 .

[12]  J. Cervantes-Sánchez,et al.  On the workspace, assembly configurations and singularity curves of the RRRRR-type planar manipulator , 2000 .

[13]  Feng Gao,et al.  On the analysis of a new spatial three-degrees-of-freedom parallel manipulator , 2001, IEEE Trans. Robotics Autom..

[14]  Jorge Angeles,et al.  On the kinematic design of the 5R planar, symmetric manipulator , 2001 .

[15]  Ilian A. Bonev.  Singularity loci of planar parallel manipulators with revolute joints , 2001 .

[16]  Jongeun Cha,et al.  Optimal architecture design of parallel manipulators for best accuracy , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[17]  Marco Ceccarelli,et al.  Optimal design of CaPaMan (Cassino Parallel Manipulator) with a specified orientation workspace , 2002, Robotica.

[18]  Gürsel Alici.  An inverse position analysis of five-bar planar parallel manipulators , 2002, Robotica.

[19]  C. Gosselin,et al.  Singularity Analysis of 3-DOF Planar Parallel Mechanisms via Screw Theory , 2003 .

[20]  Han Sung Kim,et al.  Design Optimization of a Cartesian Parallel Manipulator , 2003 .

[21]  Bijan Shirinzadeh,et al.  Optimum synthesis of planar parallel manipulators based on kinematic isotropy and force balancing , 2004, Robotica.

[22]  Xin-Jun Liu,et al.  Performance atlases and optimum design of planar 5R symmetrical parallel mechanisms , 2006 .