Surface roughness effect on rotor broadband noise

The change of helicopter rotor broadband noise due to different surface roughness during ice accretion is investigated. Comprehensive rotor broadband noise measurements are carried out on rotor blades with different roughness sizes and rotation speeds in two facilities: the Adverse Environment Rotor Test Stand facility at The Pennsylvania State University, and the University of Maryland Acoustic Chamber. In both facilities, the measured high-frequency broadband noise increases significantly with increasing surface roughness height. Rotor broadband noise source identification is conducted and the broadband noise related to ice accretion is thought to be turbulent boundary layer-trailing edge noise. Theory suggests turbulent boundary layer-trailing edge noise scales with Mach number to the fifth power, which is also observed in the experimental data confirming that the dominant broadband noise mechanism during ice accretion is trailing edge noise. A correlation between the ice-induced surface roughness and the broadband noise level is developed. The correlation is strong, which can be used as an ice accretion early detection tool for helicopters, as well as to quantify the ice-induced roughness at the early stage of rotor ice accretion. The trailing edge noise theories developed by Ffowcs Williams and Hall, and Howe both identify two important parameters: boundary layer thickness and turbulence intensity. Numerical studies of two-dimensional airfoils with different ice-induced surface roughness heights are conducted to investigate the extent that surface roughness impacts the boundary layer thickness and turbulence intensity (and ultimately the turbulent boundary layer-trailing edge noise). The results show that boundary layer thickness and turbulence intensity at the trailing edge increase with the increased roughness height. Using Howe’s trailing edge noise model, the increased sound pressure level of the trailing edge noise due to the increased displacement thickness and normalized integrated turbulence intensity are 6.2 and 1.6 dB for large and small accreted ice roughness heights, respectively. The estimated increased sound pressure level values agree reasonably well with the experimental results, which are 5.8 and 2.6 dB for large and small roughness height, respectively.

[1]  K. Pearson VII. Note on regression and inheritance in the case of two parents , 1895, Proceedings of the Royal Society of London.

[2]  Yu Liu,et al.  of Surface Roughness on Airframe Noise , 2006 .

[3]  J. Williams,et al.  Aerodynamic sound generation by turbulent flow in the vicinity of a scattering half plane , 1970, Journal of Fluid Mechanics.

[4]  M. S. Howe A review of the theory of trailing edge noise , 1978 .

[5]  Thomas F. Brooks,et al.  Blade Wake Interaction Noise for a Main Rotor , 2004 .

[6]  J. Palacios,et al.  Rotor broadband noise due to surface roughness during ice accretion , 2016 .

[7]  Sudarshan N. Koushik,et al.  A New Experimental Approach to Study Helicopter Blade-Vortex Interaction Noise , 2008 .

[8]  Michael B. Bragg,et al.  Airfoil boundary-layer development and transition with large leading-edge roughness , 1997 .

[10]  J. Palacios,et al.  Airfoil-Performance-Degradation Prediction Based on Nondimensional Icing Parameters , 2013 .

[11]  Stewart Glegg,et al.  The far-field sound from rough-wall boundary layers , 2009, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[12]  R. K. Amiet,et al.  Noise of a model helicopter rotor due to ingestion of isotropic turbulence , 1982 .

[13]  Jaiwon Shin Characteristics of surface roughness associated with leading edge ice accretion , 1994 .

[14]  David N. Anderson,et al.  Measurement and Correlation of Ice Accretion Roughness , 1998 .

[15]  Thomas F. Brooks,et al.  Scaling of airfoil self-noise using measured flow parameters , 1985 .

[16]  F. Menter Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[17]  Thomas H. Bond,et al.  Results of an icing test on a NACA 0012 airfoil in the NASA Lewis Icing Research Tunnel , 1992 .

[18]  R. J. Shaw,et al.  Ice shapes and the resulting drag increase for a NACA 0012 airfoil , 1984 .

[19]  Thomas F. Brooks,et al.  Airfoil self-noise and prediction , 1989 .