Thermal stability and flammability of silicone polymer composites

[1]  Yi-Bing Cheng,et al.  Formation of strong ceramified ash from silicone-based compositions , 2005 .

[2]  Thomas Hjertberg,et al.  The flame retardant mechanism of polyolefins modified with chalk and silicone elastomer , 2003 .

[3]  J. Nedeljković,et al.  Influence of Fe2O3-filler on the thermal properties of polystyrene , 2003 .

[4]  M. Rezac,et al.  Kinetic aspects of the thermal degradation of poly(dimethyl siloxane) and poly(dimethyl diphenyl siloxane) , 2002 .

[5]  P. Hornsby.  Fire retardant fillers for polymers , 2001 .

[6]  Massimo Lazzari,et al.  Polydimethylsiloxane thermal degradation Part 1. Kinetic aspects , 2001 .

[7]  R. Cloots,et al.  Toward the understanding of the thermal degradation of commercially available fire-resistant cable , 2000 .

[8]  Ying‐Ling Liu,et al.  Phosphorus‐containing epoxy resins for flame retardancy V: Synergistic effect of phosphorus–silicon on flame retardancy , 2000 .

[9]  J. E. Connell,et al.  Silicate–siloxane fire retardant composites , 2000 .

[10]  E. Mikkola.  Fire retardants and product behaviour in fire tests , 2000 .

[11]  T. S. Radhakrishnan.  New method for evaluation of kinetic parameters and mechanism of degradation from pyrolysis–GC studies: Thermal degradation of polydimethylsiloxanes , 1999 .

[12]  G. Nando,et al.  Thermal characterization of mica-filled thermoplastic polyurethane composites , 1999 .

[13]  G. Wypych.  Handbook of Fillers , 1999 .

[14]  T. Kashiwagi,et al.  Influence of Surface Silica on the Pyrolysis of Silicones (NISTIR 6242) , 1998 .

[15]  Usman Sorathia,et al.  A Cone Calorimetric Study of Flame Retardant Elastomeric Polyurethanes Modified with Siloxanes and Commercial Flame Retardant Additives , 1998 .

[16]  Fu-Yu Hshieh,et al.  Shielding effects of silica-ash layer on the combustion of silicones and their possible applications on the fire retardancy of organic polymers , 1998 .

[17]  Carmen Peinado,et al.  Ageing and stabilisation of filled polymers: an overview , 1998 .

[18]  P. G. Pape,et al.  The role of silicone powders in reducing the heat release rate and evolution of smoke in flame retardant thermoplastics , 1997 .

[19]  T. Kashiwagi,et al.  Fire‐retardant additives for polymeric materials—I. Char formation from silica gel–potassium carbonate , 1997 .

[20]  Mark S. Jones,et al.  Chemical modification of polymers to improve flame retardance—I. The influence of boron-containing groups , 1996 .

[21]  Gordon L. Nelson,et al.  Fire and Polymers: An Overview , 1995 .

[22]  E. Pearce.  Plastics, Their behavior in fires , 1992 .

[23]  P. Mutin,et al.  Thermal redistribution reactions in crosslinked polysiloxanes , 1992 .

[24]  K. Pál,et al.  Plastics : their behaviour in fires , 1991 .

[25]  R. Buch.  Rates of heat release and related fire parameters for silicones , 1991 .

[26]  T. J. Henman,et al.  Thermal and photochemical oxidation of polypropylene. Influence of residual catalyst levels in unstabilised diluent and gas phase polymers , 1983 .

[27]  D. V. Krevelen,et al.  Some basic aspects of flame resistance of polymeric materials , 1975 .

[28]  T. Thomas,et al.  Thermal analysis of polydimethylsiloxanes. I. Thermal degradation in controlled atmospheres , 1969 .