Interleaved coupled-inductor boost converter with boost type snubber for PV system

This paper proposes an interleaved boost converter with coupled inductor for PV power system. The proposed converter separately adopts coupled inductor and interleaved manner to achieve high step-up voltage ratio and powering capability. To recover the energy trapped in leakage inductor of coupled inductor, an active clamp circuit is used in the proposed converter for increasing conversion efficiency. Moreover, the proposed converter adopts boost type snubber to achieve soft-switching features at light load condition and to decrease loss duty at heavy load condition. As compared with the conventional interleaved coupled- inductor boost converter with active clamp circuit, the proposed converter can attain a wider operational ranges with soft-switching features and avoid a more serious loss duty. Finally, a prototype under output power of 1kW and output voltage of 400V has been implemented to prove the feasibility of the proposed converter.

[1]  Daehyun Kang,et al.  High-Efficiency Push–Pull Power Amplifier With High Operation Voltage , 2007, IEEE Microwave and Wireless Components Letters.

[2]  U. Herrmann,et al.  Low cost DC to AC converter for photovoltaic power conversion in residential applications , 1993, Proceedings of IEEE Power Electronics Specialist Conference - PESC '93.

[3]  Tsai-Fu Wu,et al.  Unified approach to developing single-stage power converters , 1998 .

[4]  Xiaodong Liu,et al.  A Novel Two Phase Nonisolated Full Bridge With Shared Primary Switches , 2008, IEEE Transactions on Power Electronics.

[5]  Mutsuo Nakaoka,et al.  Advanced Single-Stage Soft Switching PWM Power Conditioner with Coupled Inductor PWM Boost Chopper Cascaded PWM Inverter and Time-Sharing Sinusoidal Follow-Up Control Scheme , 2006 .

[6]  Eugene H. Kim,et al.  High step-up resonant push-pull converter with high efficiency , 2009 .

[7]  S. Yoshida,et al.  Switching Characteristics of GaN HFETs in a Half Bridge Package for High Temperature Applications , 2008, IEEE Transactions on Power Electronics.

[8]  Ke-Horng Chen,et al.  Low-Dropout Regulators With Adaptive Reference Control and Dynamic Push–Pull Techniques for Enhancing Transient Performance , 2009, IEEE Transactions on Power Electronics.

[9]  魏榮宗,et al.  Soft-switching converter with active-clamp technique , 2004 .

[10]  Chien-Ming Wang,et al.  A Novel Single-Stage High-Power-Factor Electronic Ballast With Symmetrical Half-Bridge Topology , 2008, IEEE Transactions on Industrial Electronics.

[11]  L. Parsa,et al.  A Novel High Efficiency High Power Interleaved Coupled-Inductor Boost DC-DC Converter for Hybrid and Fuel Cell Electric Vehicle , 2007, 2007 IEEE Vehicle Power and Propulsion Conference.

[12]  R. Martinelli,et al.  Coupled inductor boost converter with input and output ripple cancellation , 1991, [Proceedings] APEC '91: Sixth Annual Applied Power Electronics Conference and Exhibition.

[13]  Jaa Johan Wijntjens,et al.  Designing light sources for solar-powered systems , 1993 .