Actuation Response of Polyacrylate Dielectric Elastomers

Polyacrylate dielectric elastomers have yielded extremely large strain and elastic energy density suggesting that they are useful for many actuator applications. A thorough understanding of the physics underlying the mechanism of the observed response to an electric field can help develop improved actuators. The response is believed to be due to Maxwell stress, a quadratic dependence of the stress upon applied electric field. Based on this supposition, an equation relating the applied voltage to the measured force from an actuator was derived. Experimental data fit with the expected behavior, though there are discrepancies. Further analysis suggests that these arise mostly from imperfect manufacture of the actuators, though there is a small contribution from an explicitly electrostrictive behavior of the acrylic adhesive. Measurements of the dielectric constant of stretched polymer reveal that the dielectric constant drops, when the polymer is strained, indicating the existence of a small electrostrictive effect. Finally, measurements of the electric breakdown field were made. These also show a dependence upon the strain. In the unstrained state the breakdown field is 20 MV/m, which grows to 218 MV/m at 500 500% strain. This large increase could prove to be of importance in actuator design.

[1]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[2]  Elektrische Eigenschaften von gedehntem Gummi , 1932 .

[3]  R. Gerson,et al.  Dielectric Breakdown of Porous Ceramics , 1959 .

[4]  J. J. O'Dwyer,et al.  The theory of electrical conduction and breakdown in solid dielectrics , 1973 .

[5]  V. Anderson,et al.  Mechanical stress in a dielectric solid from a uniform electric field. , 1986, Physical review. B, Condensed matter.

[6]  C. F. Curtiss,et al.  Dynamics of Polymeric Liquids, Volume 1: Fluid Mechanics , 1987 .

[7]  R. Newnham,et al.  Electrostriction and polarization , 1992 .

[8]  Jerry I. Scheinbeim,et al.  High field electrostrictive response of polymers , 1994 .

[9]  Christopher W. Macosko,et al.  Rheology: Principles, Measurements, and Applications , 1994 .

[10]  Relation of the electrostrictive coefficients of a non-ionic isotropic dielectric to other material constants , 1995 .

[11]  Daniel J. Klingenberg,et al.  Material Parameters for Electrostriction. , 1996 .

[12]  Robert E. Newnham,et al.  ELECTROSTRICTION : NONLINEAR ELECTROMECHANICAL COUPLING IN SOLID DIELECTRICS , 1997 .

[13]  Toshihiro Hirai,et al.  Polyurethane elastomer actuator , 1997 .

[14]  R. Pelrine,et al.  Electrostriction of polymer dielectrics with compliant electrodes as a means of actuation , 1998 .

[15]  Zhang,et al.  Giant electrostriction and relaxor ferroelectric behavior in electron-irradiated poly(vinylidene fluoride-trifluoroethylene) copolymer , 1998, Science.

[16]  Daniel J. Klingenberg,et al.  Electrostriction of polarizable materials: Comparison of models with experimental data , 1998 .

[17]  Richard Heydt,et al.  High-field electrostriction of elastomeric polymer dielectrics for actuation , 1999, Smart Structures.

[18]  I. Krakovský,et al.  A few remarks on the electrostriction of elastomers , 1999 .

[19]  Q. Pei,et al.  High-speed electrically actuated elastomers with strain greater than 100% , 2000, Science.

[20]  Q. Pei,et al.  High-field deformation of elastomeric dielectrics for actuators , 2000 .

[21]  Peter Sommer-Larsen,et al.  Response of dielectric elastomer actuators , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[22]  Peter Sommer-Larsen,et al.  Performance of dielectric elastomer actuators and materials , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[23]  T. Yamwong,et al.  Electrostrictive response of an ideal polar rubber , 2002 .

[24]  Kaushik Bhattacharya,et al.  Electromechanical Models for Optimal Design and Effective Behavior of Electroactive Polymers , 2004 .