Design and operation of the RFX-mod plasma shape control system

Abstract The aim of executing Single Null discharges in RFX-mod operating as a Tokamak led to the design and implementation of a plasma shape feedback control system. A fully model-based approach was followed which allowed dealing with critical issues such as the presence of a conducting shell, the strong coupling of the poloidal field coils and the voltage limits of the power supplies. A Linear Quadratic regulator and a Kalman state estimator were designed and implemented in the real time MARTe framework together with an algorithm for the real-time plasma boundary reconstruction. The problem of a number of sensors along the poloidal direction adequate only for circular discharges was also successfully tackled. The development of the system and its performances in terms of tracking and disturbance rejection capability are presented in the paper.

[1]  J. A. Leuer,et al.  Multivariable model-based shape control for the National Spherical Torus Experiment (NSTX) , 2010 .

[2]  Giuseppe Marchiori,et al.  Design of the new RFX equilibrium active control system , 2005 .

[3]  R. Albanese,et al.  The linearized CREATE-L plasma response model for the control of current, position and shape in tokamaks , 1998 .

[4]  G. Marchiori,et al.  Real time measurement of plasma macroscopic parameters on RFX-mod using a limited set of sensors , 2015 .

[5]  D. A. Humphreys,et al.  Novel aspects of plasma control in ITER , 2013 .

[6]  Alfredo Pironti,et al.  Magnetic Control of Tokamak Plasmas , 2008 .

[7]  Massimiliano Mattei,et al.  Prediction of the growth rates of VDEs in JET , 2004 .

[8]  R. Paccagnella,et al.  Feedback control model of the m = 2, n = 1 resistive wall mode in a circular plasma , 2012 .

[9]  J. A. Leuer,et al.  Implementation of model-based multivariable control on DIII–D , 2001 .

[10]  M. Ariola,et al.  Plasma shape control for the JET tokamak: an optimal output regulation approach , 2005, IEEE Control Systems.

[11]  Alfredo Pironti,et al.  A new shape controller for extremely shaped plasmas in JET , 2003 .

[12]  S. Horne,et al.  Model reduction for axisymmetric Tokamak control , 1993 .

[13]  Alfredo Portone.  Design of the ITER-FEAT Plasma Control System by a Frequency Separation Approach , 2001 .

[14]  Gabriele Manduchi,et al.  Beyond the intelligent shell concept: the clean-mode-control , 2007 .

[15]  J. B. Lister,et al.  A Modern Plasma Controller Tested on the TCV Tokamak , 1999 .

[16]  G. Marchiori,et al.  Analogue feedback control system of RFX , 1996 .

[17]  Massimiliano Mattei,et al.  Design, implementation and test of the XSC extreme shape controller in JET , 2005 .

[18]  Alfredo Pironti,et al.  Plasma Current, Shape, and Position Control in ITER , 1996 .

[19]  Parag Vyas,et al.  Comparison of the CREATE-L plasma response model with TCV limited discharges , 1997 .

[20]  Sergio Ortolani,et al.  Machine modification for active MHD control in RFX , 2003 .

[21]  Massimiliano Mattei,et al.  Plasma Response Models for Current, Shape and Position Control in Jet , 2003 .

[22]  Gene F. Franklin,et al.  Digital control of dynamic systems , 1980 .