“Structure and mechanical properties of blown films of ionomer-compatibilized LDPE nanocomposites”

[1]  S. H. Anastasiadis,et al.  Polyolefin/layered silicate nanocomposites with functional compatibilizers , 2011 .

[2]  J. Eguiazábal,et al.  Dispersion and mechanical properties of a nanocomposite with an organoclay in an ionomer‐compatibilized LDPE matrix , 2011 .

[3]  A. Shaito,et al.  Separating Stress and Time Dependent Effects in the Temperature Dependent Creep of Polyethylene Nanocomposites , 2010 .

[4]  A. Shaito,et al.  Maleated amorphous ethylene propylene compatibilized polyethylene nanocomposites: Room temperature nonlinear creep response , 2010 .

[5]  J. Eguiazábal,et al.  Structure and properties of an amorphus polyamide based nanocomposite , 2009 .

[6]  E. Tashev,et al.  Thermal properties and microhardness of HDPE/clay nanocomposites compatibilized by different functionalized polyethylenes , 2009 .

[7]  R. Scaffaro,et al.  Preparation and Characterization of Polyolefin‐Based Nanocomposite Blown Films for Agricultural Applications , 2009 .

[8]  M. Frounchi,et al.  Oxygen Barrier LDPE/LLDPE/Organoclay Nano‐Composite Films for Food Packaging , 2008 .

[9]  L. Robeson,et al.  Polymer nanotechnology: Nanocomposites , 2008 .

[10]  M. C. Branciforti,et al.  Rheological, mechanical and transport properties of blown films of high density polyethylene nanocomposites , 2008 .

[11]  A. S. Luyt,et al.  Oxidized wax as compatibilizer in linear low-density polyethylene-clay nanocomposites: x-ray diffraction and dynamic mechanical analysis. , 2008, Journal of nanoscience and nanotechnology.

[12]  A. Galeski,et al.  Low density polyethylene–montmorillonite nanocomposites for film blowing , 2008 .

[13]  A. Somwangthanaroj,et al.  Effect of clay on mechanical and gas barrier properties of blown film LDPE/clay nanocomposites , 2007 .

[14]  A. Ajji,et al.  Correlation between different microstructural parameters and tensile modulus of various polyethylene blown films , 2007 .

[15]  A. Ajji,et al.  Investigation on the Structure and Properties of Different PE Blown Films , 2007 .

[16]  C. Macosko,et al.  Intercalated linear low density polyethylene (LLDPE)/clay nanocomposites prepared with oxidized polyethylene as a new type compatibilizer: Structural, mechanical and barrier properties , 2007 .

[17]  Dustin W. Janes,et al.  Mechanical and oxygen barrier properties of organoclay‐polyethylene nanocomposite films , 2007 .

[18]  R. K. Shah,et al.  Morphology and properties of nanocomposites formed from ethylene/methacrylic acid copolymers and organoclays , 2007 .

[19]  D. Acierno,et al.  Structure and dynamics of polyethylene/clay films , 2006 .

[20]  R. K. Shah,et al.  Nanocomposites from fluoro‐oxygenated polyethylene: A novel route to organoclay exfoliation , 2006 .

[21]  Dujing Wang,et al.  The role of clay network on macromolecular chain mobility and relaxation in isotactic polypropylene/organoclay nanocomposites , 2006 .

[22]  M. C. Branciforti,et al.  Correlations between processing parameters, morphology, and properties of blown films of linear low‐density polyethylene/low‐density polyethylene blends. I. Crystalline biaxial orientation by IR and mechanical properties , 2006 .

[23]  A. Ajji,et al.  Biaxial orientation in LLDPE films: Comparison of infrared spectroscopy, X‐ray pole figures, and birefringence techniques , 2006 .

[24]  R. K. Shah,et al.  Blown films of nanocomposites prepared from low density polyethylene and a sodium ionomer of poly(ethylene-co-methacrylic acid) , 2006 .

[25]  Hongyu Chen,et al.  Orientation and property correlations for LLDPE blown films , 2006 .

[26]  E. Giannelis,et al.  Controlling the miscibility of polyethylene/layered silicate nanocomposites by altering the polymer/surface interactions , 2005 .

[27]  Ajit Ranade,et al.  Maleated and non-maleated polyethylene–montmorillonite layered silicate blown films: creep, dispersion and crystallinity , 2005 .

[28]  A. Ajji,et al.  Biaxial orientation in HDPE films : comparison of infrared spectroscopy, X-ray pole figures and birefringence techniques , 2005 .

[29]  D. Kee,et al.  Morphology and properties of layered silicate‐polyethylene nanocomposite blown films , 2005 .

[30]  R. K. Shah,et al.  Nanocomposites from poly(ethylene- co -methacrylic acid) ionomers: effect of surfactant structure on morphology and properties , 2005 .

[31]  D. R. Paul,et al.  Nanocomposites formed from linear low density polyethylene and organoclays , 2004 .

[32]  T. D. Fornes,et al.  Structure and Properties of Nanocomposites Based on Nylon-11 and -12 Compared with Those Based on Nylon-6 , 2004 .

[33]  Abdellah Ajji,et al.  Oriented structure and anisotropy properties of polymer blown films: HDPE, LLDPE and LDPE , 2004 .

[34]  I. Chung,et al.  Physical properties of polyethylene/silicate nanocomposite blown films , 2003 .

[35]  G. Wilkes,et al.  Processing-structure-property investigation of blown HDPE films containing both machine and transverse direction oriented lamellar stacks , 2003 .

[36]  A. Hiltner,et al.  Structure of blown film from blends of polyethylene and high melt strength polypropylene , 2002 .

[37]  Donald R Paul,et al.  Effect of organoclay structure on nylon 6 nanocomposite morphology and properties , 2002 .

[38]  N. Mohammadi,et al.  QUANTITATIVE ORIENTATIONAL CHARACTERIZATION OF LOW-DENSITY POLYETHYLENE BLOWN FILMS BY X-RAY AND BIREFRINGENCE , 2002 .

[39]  G. Beaucage,et al.  Optical properties and orientation in polyethylene blown films , 2001 .

[40]  Jianjun Lu,et al.  Dual crystalline texture in HDPE blown films and its implication on mechanical properties , 2001 .

[41]  R. Krishnaswamy,et al.  Orientation characteristics of LLDPE blown films and their implications on Elmendorf tear performance , 2000 .

[42]  M. Lamborn,et al.  Tensile properties of linear low density polyethylene (LLDPE) blown films , 2000 .

[43]  R. Krishnaswamy.  A method to characterize the biaxial orientation of the crystalline phase in polyethylene blown films , 2000 .

[44]  G. Wilkes,et al.  Creep behaviour of high density polyethylene films having well-defined morphologies of stacked lamellae with and without an observable row-nucleated fibril structure , 1998 .

[45]  R. Prud’homme,et al.  X-ray Pole Figure and Small Angle Scattering Measurements on Tubular Blown Low-Density Poly(ethylene) Films , 1996 .

[46]  K. Walton,et al.  Investigation of processing‐structure‐properties relationships in polyethylene blown films , 1994 .

[47]  R. K. Bayer,et al.  Properties of elongational flow injection‐molded polyethylene part 2: Influence of processing parameters , 1989 .

[48]  Hitoshi Yamamoto,et al.  Order-disorder transition of ionic clusters in ionomers , 1989 .