The role of (photo)electrochemistry in the rational design of hybrid conducting polymer/semiconductor assemblies: From fundamental concepts to practical applications

[1]  Hua Zhang,et al.  Controllable growth of conducting polymers shell for constructing high-quality organic/inorganic core/shell nanostructures and their optical-electrochemical properties. , 2013, Nano letters.

[2]  Hai-chao Liang,et al.  Visible-induced photocatalytic reactivity of polymer-sensitized titania nanotube films , 2009 .

[3]  J. Velázquez,et al.  A substrate-integrated and scalable templated approach based on rusted steel for the fabrication of polypyrrole nanotube arrays. , 2011, ACS applied materials & interfaces.

[4]  J. Nam,et al.  A facile synthetic route for well defined multilayer films of graphene and PEDOTvia an electrochemical method , 2012 .

[5]  B. Liu,et al.  Solid‐State Dye‐Sensitized Solar Cells with Conjugated Polymers as Hole‐Transporting Materials , 2011 .

[6]  F. Bella,et al.  Photoinduced polymerization: An innovative, powerful and environmentally friendly technique for the preparation of polymer electrolytes for dye-sensitized solar cells , 2013 .

[7]  Claes-Göran Granqvist,et al.  Electrochromic tungsten oxide films: Review of progress 1993–1998 , 2000 .

[8]  S. Bereznev,et al.  Hybrid copper-indium disulfide/polypyrrole photovoltaic structures prepared by electrodeposition , 2005 .

[9]  D. Mecerreyes,et al.  Electrochemical Synthesis of Poly(3,4-ethylenedioxythiophene) Nanotube Arrays Using ZnO Templates , 2010 .

[10]  Zhanhu Guo,et al.  Electrochromic Poly(DNTD)/WO3 Nanocomposite Films via Electorpolymerization , 2012 .

[11]  Li-Jun Zhang,et al.  Composite films of polyaniline and molybdenum oxide formed by electrocodeposition in aqueous media , 2007 .

[12]  A. J. Frank,et al.  Stabilization of n-type silicon photoelectrodes to surface oxidation in aqueous electrolyte solution and mediation of oxidation reaction by surface-attached organic conducting polymer , 1981 .

[13]  Krishnan Rajeshwar,et al.  Heterogeneous photocatalytic treatment of organic dyes in air and aqueous media , 2008 .

[14]  Dye-sensitized solar cells based on PEDOP as a hole conductive medium , 2008 .

[15]  Anran Liu,et al.  Electrosynthesis of graphene oxide/polypyrene composite films and their applications for sensing organic vapors , 2012 .

[16]  K. Rajeshwar,et al.  Bringing Conjugated Polymers and Oxide Nanoarchitectures into Intimate Contact: Light-Induced Electrodeposition of Polypyrrole and Polyaniline on Nanoporous WO3 or TiO2 Nanotube Array , 2012 .

[17]  N. Kobayashi,et al.  Conducting polymer image formation with photoinduced electron transfer reaction , 1998 .

[18]  Qi Wang,et al.  A nanomaterial composed of cobalt nanoparticles, poly(3,4-ethylenedioxythiophene) and graphene with high electrocatalytic activity for nitrite oxidation , 2012, Microchimica Acta.

[19]  Greg P. Smestad,et al.  Characterization of nanocrystalline and thin film TiO2 solar cells with poly(3-undecyl-2,2'-bithiophene) as a sensitizer and hole conductor , 2002 .

[20]  C. Julien,et al.  Preparation and characterization of polybithiophene/β-MnO2 composite electrode for oxygen reduction , 2011 .

[21]  Electrical properties of porous silicon/polypyrrole heterojunctions , 2006 .

[22]  Yaoming Xiao,et al.  Functionalized graphene/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate as counter electrode catalyst for dye-sensitized solar cells , 2013 .

[23]  G. Bidan,et al.  New nanocomposites based on “tailor dressed” magnetic particles in a polypyrrole matrix , 1994 .

[24]  R. Boukherroub,et al.  Preparation and electrochemical behaviour of PPy-CdS composite films , 2011 .

[25]  S. Ramakrishna,et al.  An Efficient Organic‐Dye‐Sensitized Solar Cell with in situ Polymerized Poly(3,4‐ethylenedioxythiophene) as a Hole‐Transporting Material , 2010, Advanced materials.

[26]  Jun Jin,et al.  A comparative study on electrochemical co-deposition and capacitance of composite films of conducting polymers and carbon nanotubes , 2007 .

[27]  Y. Wada,et al.  Fabrication of solid-state dye-sensitized TiO2 solar cells combined with polypyrrole , 1998 .

[28]  T. Kitamura,et al.  Photo-sensitizing ruthenium complexes for solid state dye solar cells in combination with conducting polymers as hole conductors , 2004 .

[29]  S. Desu,et al.  Manganese oxide embedded polypyrrole nanocomposites for electrochemical supercapacitor , 2008 .

[30]  Nikolai Gaponik,et al.  Electrochemical synthesis of CdTe nanocrystal/polypyrrole composites for optoelectronic applications , 2000 .

[31]  B. He,et al.  Supercapacitive properties of hybrid films of manganese dioxide and polyaniline based on active carbon in organic electrolyte , 2010 .

[32]  Hooi-Sung Kim,et al.  Photoelectropolymerization of aniline in a dye-sensitized solar cell , 2006, Photochemical & photobiological sciences : Official journal of the European Photochemistry Association and the European Society for Photobiology.

[33]  P. Fries,et al.  New nanocomposites of polypyrrole including γ-Fe2O3 particles: electrical and magnetic characterizations , 1995 .

[34]  Michael D. McGehee,et al.  Nanostructured Organic—Inorganic Hybrid Solar Cells , 2009 .

[35]  B. Liu,et al.  Iodine-free organic dye sensitized solar cells with in situ polymerized hole transporting material from alkoxy-substituted TriEDOT , 2012, Polymer Bulletin.

[36]  A. Ivaska,et al.  Electrochemical polymerization and characterization of a poly(azulene)-TiO2 nanoparticle composite film , 2009 .

[37]  M. Fox,et al.  Comparison of the physical properties of polypyrrole produced by anodic oxidation and by photoelectrochemical activation of titanium dioxide , 1991 .

[38]  Chengzhou Zhu,et al.  Graphene oxide/polypyrrole nanocomposites: one-step electrochemical doping, coating and synergistic effect for energy storage , 2012 .

[39]  S. Kuwabata,et al.  Charge–discharge properties of polypyrrole films containing manganese dioxide particles , 1991 .

[40]  T. P. Gujar,et al.  Fabrication of n-CdTe/p-polyaniline heterojunction-based room temperature LPG sensor , 2008 .

[41]  Li Li,et al.  Methanol electrooxidation on Pt particles dispersed into PANI/SWNT composite films , 2006 .

[42]  R. Advíncula,et al.  Hybrid CdSe Nanoparticle–Carbazole Dendron Boxes: Electropolymerization and Energy‐Transfer Mechanism Shift , 2008 .

[43]  E. Garfunkel,et al.  Interfacial Bonding and Morphological Control of Electropolymerized Polythiophene Films on ZnO , 2013 .

[44]  K. Hinrichs,et al.  Ultrathin polypyrrole films on silicon substrates , 2008 .

[45]  Y. Shim,et al.  Comparison of solar cell performance of conducting polymer dyes with different functional groups , 2011 .

[46]  Quli Fan,et al.  One‐Step Electrochemical Synthesis of Graphene/Polyaniline Composite Film and Its Applications , 2011 .

[47]  A. Rinzler,et al.  Supercapacitors Based on Polymeric Dioxypyrroles and Single Walled Carbon Nanotubes , 2012 .

[48]  K. Vijayamohanan,et al.  Deposition and characterization of CdS nanoparticle/polyaniline composite films , 1999 .

[49]  C. Visy,et al.  Electrochemical grafting of poly(3,4-ethylenedioxythiophene) into a titanium dioxide nanotube host network. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[50]  W. Cho,et al.  Cyclic Stability of Electrochemically Embedded Nanobeam V2O5 in Polypyrrole Films for Li Battery Cathodes , 2011 .

[51]  Y. Alias,et al.  Electrochemical characteristics of coated steel with poly(N-methyl pyrrole) synthesized in presence of ZnO nanoparticles , 2011 .

[52]  Takayuki Kitamura,et al.  Solid state dye sensitized solar cells using in situ polymerized PEDOTs as hole conductor , 2004 .

[53]  Dongsheng Xu,et al.  Fabrication of Poly(3-hexylthiophene)/CdS/ZnO Core–Shell Nanotube Array for Semiconductor-Sensitized Solar Cell , 2012 .

[54]  Markus Antonietti,et al.  High Electroactivity of Polyaniline in Supercapacitors by Using a Hierarchically Porous Carbon Monolith as a Support , 2007 .

[55]  G. Horowitz,et al.  Polythiophene-GaAs p-n heterojunction solar cells , 1986 .

[56]  A. Best,et al.  Conducting-polymer-based supercapacitor devices and electrodes , 2011 .

[57]  Seth B Darling,et al.  Improved hybrid solar cells via in situ UV polymerization. , 2009, Small.

[58]  Norio Miura,et al.  Polyaniline/single-wall carbon nanotube (PANI/SWCNT) composites for high performance supercapacitors , 2006 .

[59]  W. Guo,et al.  Electropolymerization of a poly(3,4-ethylenedioxythiophene) and functionalized, multi-walled, carbon nanotubes counter electrode for dye-sensitized solar cells and characterization of its performance , 2011 .

[60]  Yu Chuan Liu,et al.  Effect of TiO2 nanoparticles on the electropolymerization of polypyrrole , 2004 .

[61]  E. Girotto,et al.  Structural, magnetic, and electrochemical properties of poly(o-anisidine)/maghemite thin films , 2006 .

[62]  D. Lenz,et al.  Application of polypyrrole/TiO2 composite films as corrosion protection of mild steel , 2003 .

[63]  K. Rajeshwar,et al.  Photocatalytically Prepared Metal Nanocluster–Oxide Semiconductor–Carbon Nanocomposite Electrodes for Driving Multielectron Transfer , 2013 .

[64]  A. Heeger,et al.  Semiconducting polymers: the Third Generation. , 2010, Chemical Society reviews.

[65]  Pengyi Tang,et al.  Step-by-step assembled poly(3,4-ethylenedioxythiophene)/manganese dioxide composite electrodes: Tuning the structure for high electrochemical performance , 2013 .

[66]  N. Armstrong,et al.  Poly(3,4-ethylenedioxythiophene)-semiconductor nanoparticle composite thin films tethered to indium tin oxide substrates via electropolymerization. , 2007, Journal of the American Chemical Society.

[67]  J. Heinze.  Electrochemistry of conducting polymers , 1991 .

[68]  Zhiping Luo,et al.  Electropolymerized Polyaniline Stabilized Tungsten Oxide Nanocomposite Films: Electrochromic Behavior and Electrochemical Energy Storage , 2012 .

[69]  M. Rincón,et al.  Effect of Bi2S3 nanoparticles in the protection mechanism of polypyrrole thin films , 2003 .

[70]  Nam-Gyu Park,et al.  Organometal Perovskite Light Absorbers Toward a 20% Efficiency Low-Cost Solid-State Mesoscopic Solar Cell , 2013 .

[71]  Yuji Wada,et al.  Efficient dye sensitized solar cells based on a 2-thiophen-2-yl-vinyl-conjugated ruthenium photosensitizer and a conjugated polymer hole conductor , 2006 .

[72]  Y. Tachibana,et al.  Photoinduced Formation of Polythiophene/TiO2 Nanohybrid Heterojunction Films for Solar Cell Applications , 2008 .

[73]  K. Rajeshwar,et al.  Electrodeposited Polyaniline in a Nanoporous WO3 Matrix: An Organic/Inorganic Hybrid Exhibiting Both p- and n-Type Photoelectrochemical Activity , 2012 .

[74]  D. Macfarlane,et al.  Designed electrodeposition of nanoparticles inside conducting polymers , 2012 .

[75]  E. Frąckowiak,et al.  Capacitance properties of poly(3,4-ethylenedioxythiophene)/carbon nanotubes composites , 2004 .

[76]  Y. Tong,et al.  Titanium dioxide@polypyrrole core-shell nanowires for all solid-state flexible supercapacitors. , 2013, Nanoscale.

[77]  Lan Jiang,et al.  Three-dimensional graphene-polypyrrole hybrid electrochemical actuator. , 2012, Nanoscale.

[78]  S. Bereznev,et al.  Hybrid CuInS2/polypyrrole and CuInS2/poly(3,4-ethylenedioxythiophene) photovoltaic structures , 2005 .

[79]  C. M. Li,et al.  Well-Aligned Cone-Shaped Nanostructure of Polypyrrole/RuO2 and Its Electrochemical Supercapacitor , 2008 .

[80]  J. Tu,et al.  Multicolor and fast electrochromism of nanoporous NiO/poly(3,4-ethylenedioxythiophene) composite thin film , 2009 .

[81]  C. Plesse,et al.  Facile route to prepare film of poly(3,4-ethylene dioxythiophene)-TiO2 nanohybrid for solar cell application , 2011 .

[82]  P. Bocchetta,et al.  Photoelectrochemical Synthesis of Polypyrrole on Anodic Ta2O5 Films , 2007 .

[83]  P. Sebastián,et al.  A CdTe/PMeT photovoltaic structure formed by electrodeposition and processing , 1999 .

[84]  Kazuharu Suzuki,et al.  Solid-state dye-sensitized solar cells fabricated by coupling photoelectrochemically deposited poly(3,4-ethylenedioxythiophene) (PEDOT) with silver-paint on cathode. , 2011, Chemical communications.

[85]  A. Ramanavičius,et al.  Electrochemical sensors based on conducting polymer—polypyrrole , 2006 .

[86]  M. Deepa,et al.  Poly(3,4-ethylenedioxythiophene)-multiwalled carbon nanotube composite films: structure-directed amplified electrochromic response and improved redox activity. , 2009, The journal of physical chemistry. B.

[87]  S. Kuwabata,et al.  Electrochemical Synthesis of Polypyrrole Films Containing TiO2 Powder Particles , 1990 .

[88]  C. Malitesta,et al.  Conducting polymer electrodes modified by metallic species for electrocatalytic purposes—spectroscopic and microscopic characterization , 1996 .

[89]  Mei Gao,et al.  Aligned Coaxial Nanowires of Carbon Nanotubes Sheathed with Conducting Polymers , 2000 .

[90]  Q. Qiao,et al.  Conjugated polymer–inorganic semiconductor hybrid solar cells , 2011 .

[91]  A. L. Dyer,et al.  Navigating the Color Palette of Solution-Processable Electrochromic Polymers† , 2011 .

[92]  K. Zaghib,et al.  Polypyrrole-covered MnO2 as electrode material for supercapacitor , 2013 .

[93]  Sean E. Shaheen,et al.  Effect of Polymer Processing on the Performance of Poly(3-hexylthiophene)/ZnO Nanorod Photovoltaic Devices , 2007 .

[94]  Yuehe Lin,et al.  Electrosynthesis, characterization, and application of novel hybrid materials based on carbon nanotube–polyaniline–nickel hexacyanoferrate nanocomposites , 2006 .

[95]  B. C. Kim,et al.  Supercapacitive properties of polyaniline/hydrous RuO2 composite electrode , 2011, Polymer Bulletin.

[96]  Xiao-Xia Liu,et al.  Electrodepositions and capacitive properties of hybrid films of polyaniline and manganese dioxide with fibrous morphologies , 2008 .

[97]  I. Kymissis,et al.  Electrochemical codeposition of poly(thieno(3,2-b)thiophene) and fullerene: An approach to a bulk heterojunction organic photovoltaic device , 2012 .

[98]  R. Advíncula,et al.  Nanocomposite p-n Junction Polycarbazole CdSe/TiO2 Thin Films on ITO via Electrochemical Crosslinking , 2012 .

[99]  Itamar Willner,et al.  Electrochemical Assembly of a CdS Semiconductor Nanoparticle Monolayer on Surfaces: Structural Properties and Photoelectrochemical Applications , 2004 .

[100]  Zhiliang Zhu,et al.  A novel photoelectrochemical sensor based on molecularly imprinted polymer modified TiO2 nanotubes and its highly selective detection of 2,4-dichlorophenoxyacetic acid , 2011 .

[101]  Galo J. A. A. Soler-Illia,et al.  Titania/Polypyrrole Hybrid Nanocomposites Built from In‐Situ Generated Organically Functionalized Nanoanatase Building Blocks , 2003 .

[102]  Shih‐Yuan Lu,et al.  Characterization of Polypyrrole-CdSe/CdTe Nanocomposite Films Prepared with an All Electrochemical Deposition Process , 2003 .

[103]  S. Kuwabata,et al.  Electrochemical Synthesis of Composite Films of Manganese Dioxide and Polypyrrole and Their Properties as an Active Material in Lithium Secondary Batteries , 1994 .

[104]  Xuan Zhao,et al.  p-n Heterojunction on ordered ZnO nanowires/polyaniline microrods double array. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[105]  Luping Yu,et al.  Development of Semiconducting Polymers for Solar Energy Harvesting , 2010 .

[106]  D. Bavykin,et al.  Electrodeposition of polypyrrole-titanate nanotube composites coatings and their corrosion resistance , 2011 .

[107]  K. Rajeshwar,et al.  Electrocomposites of Polypyrrole and Carbon Black , 1994 .

[108]  W. Cho,et al.  Electrochemical preparation and characterization of V2O5/polyaniline composite film cathodes for Li battery , 2010 .

[109]  F. Beck,et al.  Anodic codeposition of polypyrrole and dispersed TiO2 , 1992 .

[110]  Xuehong Lu,et al.  Hybrid Materials and Polymer Electrolytes for Electrochromic Device Applications , 2012, Advanced materials.

[111]  M. Marcaccio,et al.  Electrochemical and electrochromic investigation of poly-bithiophene films on a mesoporous TiO2 surface , 2006 .

[112]  S. Kuwabata,et al.  Formation of a light image in a polyaniline film containing titanium(IV) oxide particles , 1992 .

[113]  A. Alivisatos,et al.  Hybrid Nanorod-Polymer Solar Cells , 2002, Science.

[114]  Norio Miura,et al.  Polyaniline- MnO2 Composite Electrode for High Energy Density Electrochemical Capacitor , 2004 .

[115]  G. Horowitz,et al.  Protection of n ‐ GaAs Photoanodes by Photoelectrochemical Grafting of Poly (3‐Methyl‐thiophene) and Poly (3,4‐Dimethyl‐thiophene) Films , 1984 .

[116]  G. Shi,et al.  LOW POTENTIAL ELECTROPOLYMERIZATION OF THIOPHENE AT A COPPER OXIDE ELECTRODE , 1999 .

[117]  Zhibin Yang,et al.  Oriented PEDOT:PSS on aligned carbon nanotubes for efficient dye-sensitized solar cells , 2013 .

[118]  P. Su,et al.  Humidity sensors based on TiO2 nanoparticles/polypyrrole composite thin films , 2007 .

[119]  I. Willner,et al.  Photoelectrochemical cells based on bis-aniline-crosslinked CdS nanoparticle–carbon nanotube matrices associated with electrodes , 2009 .

[120]  A. J. Frank,et al.  Conductive polymer-semiconductor junction: characterization of poly(3-methylthiophene):Cadmium sulfide based photoelectrochemical and photovoltaic cells , 1989 .

[121]  Jun Li,et al.  Self-supported supercapacitor membranes: Polypyrrole-coated carbon nanotube networks enabled by pulsed electrodeposition , 2010 .

[122]  Anders Hagfeldt,et al.  Effect of Different Hole Transport Materials on Recombination in CH3NH3PbI3 Perovskite-Sensitized Mesoscopic Solar Cells. , 2013, The journal of physical chemistry letters.

[123]  Ping-jie Wei,et al.  Synergy effects between single-walled carbon nanotubes and polypyrrole on the electrocatalysis of their composites for the oxygen reduction reaction , 2011 .

[124]  Junli Xu,et al.  Electrochemical anchoring of dual doping polypyrrole on graphene sheets partially exfoliated from graphite foil for high-performance supercapacitor electrode , 2014 .

[125]  G. Chen,et al.  Electrochemical Capacitance of a Nanoporous Composite of Carbon Nanotubes and Polypyrrole , 2002 .

[126]  P. Chu,et al.  Coaxial PANI/TiN/PANI nanotube arrays for high-performance supercapacitor electrodes. , 2013, Chemical communications.

[127]  F. A. Harraz,et al.  Hybrid nanostructure of polypyrrole and porous silicon prepared by galvanostatic technique , 2008 .

[128]  Damian Kowalski,et al.  Polypyrrole self-organized nanopore arrays formed by controlled electropolymerization in TiO2 nanotube template. , 2010, Chemical communications.

[129]  Xiliang Luo,et al.  Highly stable carbon nanotube doped poly(3,4-ethylenedioxythiophene) for chronic neural stimulation. , 2011, Biomaterials.

[130]  J. Mieczkowski,et al.  Synthesis, characterization and photoelectrochemical properties of poly(3,4-dioctyloxythiophene)–CdS hybrid electrodes , 2008 .

[131]  I. Ivanov,et al.  Electro‐optical properties of electropolymerized poly(3‐hexylthiophene)/carbon nanotube composite thin films , 2011 .

[132]  R. Jayavel,et al.  Fabrication of polypyrrole/ZnCoO nanohybrid systems for solar cell applications. , 2010, Dalton transactions.

[133]  W. Cho,et al.  Electrochemical Impedance Analysis of V2O5 and PEDOT Composite Film Cathodes , 2011 .

[134]  P. Bocchetta,et al.  Light induced electropolymerization of poly(3,4-ethylenedioxythiophene) on niobium oxide , 2010 .

[135]  Anran Liu,et al.  Electrochemical Deposition of Polypyrrole/Sulfonated Graphene Composite Films , 2010 .

[136]  Ran Liu,et al.  Synthesis and characterization of RuO(2)/poly(3,4-ethylenedioxythiophene) composite nanotubes for supercapacitors. , 2010, Physical chemistry chemical physics : PCCP.

[137]  Feng-Jiin Liu,et al.  Electrodeposition of manganese dioxide in three-dimensional poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonic acid)–polyaniline for supercapacitor , 2008 .

[138]  Ran Liu,et al.  Electrochemical formation mechanism for the controlled synthesis of heterogeneous MnO2/Poly(3,4-ethylenedioxythiophene) nanowires. , 2011, ACS nano.

[139]  Eunkyoung Kim,et al.  Highly Efficient, Iodine‐Free Dye‐Sensitized Solar Cells with Solid‐State Synthesis of Conducting Polymers , 2011, Advanced materials.

[140]  K. Rajeshwar,et al.  Semiconductor-Based Composite Materials: Preparation, Properties, and Performance , 2001 .

[141]  Li Li,et al.  Flexible, weavable and efficient microsupercapacitor wires based on polyaniline composite fibers incorporated with aligned carbon nanotubes , 2013 .

[142]  G. Boschloo,et al.  New Approach for Preparation of Efficient Solid-State Dye-Sensitized Solar Cells by Photoelectrochemical Polymerization in Aqueous Micellar Solution , 2013 .

[143]  Yibing Xie,et al.  Electrochemical capacitance performance of polypyrrole–titania nanotube hybrid , 2012, Journal of Solid State Electrochemistry.

[144]  J. Schoonman,et al.  UV Polymerization of Oligothiophenes and Their Application in Nanostructured Heterojunction Solar Cells , 2004 .

[145]  Hu-lin Li,et al.  Electrocatalytic oxidation of formic acid on platinum particles dispersed in SWNT/PANI composite film , 2005 .

[146]  P. Chartier,et al.  Cadmium sulfide thickness effect on the photoresponse of the CdS(A1) spray/poly(3-methylthiophene) solid state junction , 1993 .

[147]  J. L. Gautier,et al.  Oxygen reduction on oxide/polypyrrole composite electrodes: effect of doping anions , 2005 .

[148]  H. X. Yang,et al.  A solar rechargeable battery based on polymeric charge storage electrodes , 2012 .

[149]  Xiaohong Li,et al.  Well-dispersed single-walled carbon nanotube/polyaniline composite films , 2003 .

[150]  Jiao Wang,et al.  Photoresponsive polypyrrole- TiO2 nanoparticles film fabricated by a novel surface initiated polymerization , 2008 .

[151]  M. Saglam,et al.  Current–voltage and capacitance–voltage characteristics of polypyrrole/p-InP structure , 2005 .

[152]  S. Luo,et al.  One-step electrodeposition to layer-by-layer graphene-conducting-polymer hybrid films. , 2012, Macromolecular rapid communications.

[153]  Hao Zhang,et al.  Influence of microstructure on the capacitive performance of polyaniline/carbon nanotube array composite electrodes , 2009 .

[154]  A. Gopalan,et al.  Fabrication of a new polyaniline grafted multi-wall carbon nanotube modified electrode and its application for electrochemical detection of hydrogen peroxide. , 2006, Analytica chimica acta.

[155]  Pedro Gómez-Romero,et al.  Improvement in the Ppy/V2O5 hybrid as a cathode material for Li ion batteries using PSA as an organic additive , 2007 .

[156]  Y. Sung,et al.  Solid-state dye-sensitized TiO2 solar cells using poly(3,4-ethylenedioxythiophene) as substitutes of iodine/iodide electrolytes and noble metal catalysts on FTO counter electrodes , 2008 .

[157]  Zhifeng Wang,et al.  Photoelectrochemical properties of polypyrrole/TiO2 nanotube arrays nanocomposite under visible light , 2012 .

[158]  Jussi Kauppila,et al.  Electrochemical incorporation of graphene oxide into conducting polymer films , 2012 .

[159]  P. Kamat.  Quantum Dot Solar Cells. The Next Big Thing in Photovoltaics. , 2013, The journal of physical chemistry letters.

[160]  G. Stucky,et al.  In situ photopolymerization of pyrrole in mesoporous TiO2. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[161]  P. Kamat,et al.  Polymer-modified electrodes. Electrochemical and photoelectrochemical polymerization of 1-vinylpyrene , 1985 .

[162]  Hailan Chen,et al.  Selective and sensitive determination of dopamine by composites of polypyrrole and graphene modified electrodes. , 2011, The Analyst.

[163]  Philippe Schottland,et al.  The mechanisms of pyrrole electropolymerization , 2000 .

[164]  M. Deepa,et al.  Poly(3,4-ethylenedioxythiophene) (PEDOT)-coated MWCNTs tethered to conducting substrates: facile electrochemistry and enhanced coloring efficiency , 2008 .

[165]  K. Jiang,et al.  Effect of Doping Anions’ Structures on Poly(3,4-ethylenedioxythiophene) as Hole Conductors in Solid-State Dye-Sensitized Solar Cells , 2008 .

[166]  C. Visy,et al.  Conducting Polymer-Based Electrode with Magnetic Behavior: Electrochemical Synthesis of Poly(3-thiophene-acetic-acid)/Magnetite Nanocomposite Thin Layers , 2009 .

[167]  P. Chartier,et al.  Hybrid organic–inorganic solar cells: Case of the all thin film PMeT(Y)/CdS(X) junctions , 2000 .

[168]  Soo‐Hyoung Lee,et al.  Photoelectrochemically polymerized polythiophene layers on ruthenium photosensitizers in dye-sensitized solar cells and their beneficial effects , 2009 .

[169]  G. Wallace,et al.  Microsecond dye regeneration kinetics in efficient solid state dye-sensitized solar cells using a photoelectrochemically deposited PEDOT hole conductor. , 2010, Journal of the American Chemical Society.

[170]  Xizhe Liu,et al.  Light controlled assembling of iodine-free dye-sensitized solar cells with poly(3,4-ethylenedioxythiophene) as a hole conductor reaching 7.1% efficiency. , 2012, Physical chemistry chemical physics : PCCP.

[171]  L. Qu,et al.  Defective super-long carbon nanotubes and polypyrrole composite for high-performance supercapacitor electrodes , 2012 .

[172]  Milo S. P. Shaffer,et al.  Carbon Nanotube and Polypyrrole Composites: Coating and Doping , 2000 .

[173]  S. Bereznev,et al.  Electrodeposited (Cu–In–Se)/polypyrrole PV structures , 2006 .

[174]  Yuji Wada,et al.  Solid State Dye-Sensitized TiO2 Solar Cell with Polypyrrole as Hole Transport Layer , 1997 .

[175]  P. R. Deshmukh,et al.  Fabrication and liquefied petroleum gas (LPG) sensing performance of p-polyaniline/n-PbS heterojunction at room temperature , 2011 .

[176]  P. Chartier,et al.  Hybrid organic–inorganic photovoltaı̈c junctions:: case of the all thin-film CdSe/poly(3-methylthiophene) junction , 1998 .

[177]  P. Schmuki,et al.  Polymer nanowires or nanopores? Site selective filling of titania nanotubes with polypyrrole , 2011 .

[178]  Jae-Woong Yu,et al.  Network structure organic photovoltaic devices prepared by electrochemical copolymerization , 2009 .

[179]  A. Pron,et al.  Conjugated polymers/semiconductor nanocrystals hybrid materials--preparation, electrical transport properties and applications. , 2011, Nanoscale.

[180]  C. A. Ferreira,et al.  Synthesis and characterization of polypyrrole/TiO2 composites on mild steel , 2001 .

[181]  P. K. Shen,et al.  A Study of Tungsten Trioxide and Polyaniline Composite Films I . Electrochemical and Electrochromic Behavior , 1992 .

[182]  P. Schmuki,et al.  Current dependent formation of PEDOT inverse nanotube arrays , 2013 .

[183]  K. Rajeshwar,et al.  Composites of Polypyrrole and Carbon Black. 2. Electrosynthesis, Characterization and Influence of Carbon Black Characteristics , 1995 .

[184]  D. Dhawale,et al.  Room temperature LPG sensor based on n-CdS/p-polyaniline heterojunction , 2010 .

[185]  K. Lau,et al.  Electrochemical synthesis of WO3/PANI composite for electrocatalytic reduction of iodate , 2010 .

[186]  Hiroshi Segawa,et al.  Energy-storable dye-sensitized solar cell with a polypyrrole electrode. , 2004, Chemical communications.

[187]  C. Visy,et al.  Photo-electrochemical sensor for dissolved oxygen, based on a poly(3,4-ethylenedioxythiophene)/iron oxalate hybrid electrode. , 2010, The Analyst.

[188]  Johan Bobacka,et al.  Potentiometric Ion Sensors Based on Conducting Polymers , 2003 .

[189]  S. Lefrant,et al.  Raman spectroscopic evidence for interfacial interactions in poly(bithiophene)/single-walled carbon nanotube composites , 2009 .

[190]  L. Micaroni,et al.  Poly(3-methylthiophene)/MnO2 composite electrodes as electrochemical capacitors , 2007 .

[191]  X. Xia,et al.  A highly porous NiO/polyaniline composite film prepared by combining chemical bath deposition and electro-polymerization and its electrochromic performance , 2008, Nanotechnology.

[192]  Soo‐Hyoung Lee,et al.  Polythiophene infiltrated TiO2 nanotubes as high-performance supercapacitor electrodes. , 2013, Chemical communications.

[193]  P. Gómez‐Romero.  Hybrid Organic–Inorganic Materials—In Search of Synergic Activity , 2001 .

[194]  Ran Liu,et al.  MnO2/poly(3,4-ethylenedioxythiophene) coaxial nanowires by one-step coelectrodeposition for electrochemical energy storage. , 2008, Journal of the American Chemical Society.

[195]  J. Noh,et al.  Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors , 2013, Nature Photonics.

[196]  A. J. Frank,et al.  Oxygen and hydrogen generation from water on polymer-protected CdS photoanodes , 1983 .

[197]  A. Ivaska,et al.  Electrochemical functionalization of single walled carbon nanotubes with polyaniline in ionic liquids , 2007 .

[198]  Takayuki Kitamura,et al.  Volatile solvent-free solid-state polymer-sensitized TiO2 solar cells with poly(3,4-ethylenedioxythiophene) as a hole-transporting medium. , 2005, Chemical communications.

[199]  Zhongfan Liu,et al.  Conducting polymer/carbon nanotube composite films made by in situ electropolymerization using an ionic surfactant as the supporting electrolyte , 2005 .

[200]  G. Shi,et al.  Conducting polymer nanomaterials: electrosynthesis and applications. , 2009, Chemical Society reviews.

[201]  C. Visy,et al.  Visible-Light-Enhanced Electrocatalytic Activity of a Polypyrrole/Magnetite Hybrid Electrode toward the Reduction of Dissolved Dioxygen , 2010 .

[202]  V. Birss,et al.  Electrochemical formation of Ir oxide/polyaniline composite films , 2008 .

[203]  Yexiang Tong,et al.  Polyaniline nanotube arrays as high-performance flexible electrodes for electrochemical energy storage devices , 2012 .

[204]  I. Willner,et al.  Solar Cells with Enhanced Photocurrent Efficiencies Using Oligoaniline‐Crosslinked Au/CdS Nanoparticles Arrays on Electrodes , 2008 .

[205]  J. L. Gautier,et al.  Ni{sub x}Co{sub 3}-xO{sub 4} mixed valence oxide nanoparticles/polypyrrole composite electrodes for oxygen reduction , 2002 .

[206]  Y. Gan,et al.  Experimental study on synthesizing TiO2 nanotube/polyaniline (PANI) nanocomposites and their thermoelectric and photosensitive property characterization , 2012 .

[207]  I. Lundström,et al.  Stabilization of n‐Si Photoanodes to Surface Corrosion in Aqueous Electrolyte with a Thin Film of Polypyrrole , 1981 .

[208]  C. Deslouis,et al.  Surface reactivity of polypyrrole/iron-oxide nanoparticles: electrochemical and CS-AFM investigations , 2007 .

[209]  M. Grzeszczuk,et al.  Towards TiO2-conducting polymer hybrid materials for lithium ion batteries , 2010 .

[210]  Hu-lin Li,et al.  Well-dispersed multi-walled carbon nanotube/polyaniline composite films , 2005 .

[211]  S. Kwak,et al.  Electrodeposition of mesoporous bilayers of polyaniline supported Cu2O semiconductor films from Lyotropic Liquid Crystalline phase , 2012 .

[212]  M. Rincón,et al.  Inclusion of Bi2S3 nanoparticles in polypyrrole thin films electropolymerized on chemically deposited bismuth sulfide electrodes: synthesis and characterization , 2003 .

[213]  C. Visy,et al.  Electrocatalytic properties of the polypyrrole/magnetite hybrid modified electrode towards the reduction of hydrogen peroxide in the presence of dissolved oxygen , 2012 .

[214]  P. Pickup,et al.  Electrochemical impedance study of the polymerization of pyrrole on high surface area carbon electrodes. , 2010, Physical chemistry chemical physics : PCCP.

[215]  Y. Tachibana,et al.  Organic/inorganic hybrid electrochromic devices based on photoelectrochemically formed polypyrrole/TiO2 nanohybrid films , 2012 .

[216]  Rupali Gangopadhyay and,et al.  Conducting Polymer Nanocomposites: A Brief Overview , 2000 .

[217]  S. Jiao,et al.  In situ electrochemical polymerization of a nanorod-PANI-Graphene composite in a reverse micelle electrolyte and its application in a supercapacitor. , 2012, Physical chemistry chemical physics : PCCP.

[218]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[219]  Yaoming Xiao,et al.  Pulse electropolymerization of high performance PEDOT/MWCNT counter electrodes for Pt-free dye-sensitized solar cells , 2012 .

[220]  Guofa Cai,et al.  Multicolor Electrochromic Film Based on TiO2@Polyaniline Core/Shell Nanorod Array , 2013 .

[221]  K. Ho,et al.  Detection of nicotine based on molecularly imprinted TiO2-modified electrodes. , 2009, Analytica chimica acta.

[222]  Michael Grätzel,et al.  Tris(2-(1H-pyrazol-1-yl)pyridine)cobalt(III) as p-type dopant for organic semiconductors and its application in highly efficient solid-state dye-sensitized solar cells. , 2011, Journal of the American Chemical Society.

[223]  A. Alivisatos,et al.  Electroactive Surfactant Designed to Mediate Electron Transfer Between CdSe Nanocrystals and Organic Semiconductors , 2003 .

[224]  James Alastair McLaughlin,et al.  High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs , 2005 .

[225]  Shozo Yanagida,et al.  Iodine/iodide-free dye-sensitized solar cells. , 2009, Accounts of chemical research.

[226]  Chunlei Wang,et al.  Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery , 2008 .

[227]  M. Grätzel,et al.  Toward interaction of sensitizer and functional moieties in hole-transporting materials for efficient semiconductor-sensitized solar cells. , 2011, Nano letters.

[228]  A. Ivaska,et al.  Electrochemical preparation of oligo(azulene) on nanoporous TiO2 and characterization of the composite layer , 2010 .

[229]  Z. Du,et al.  Facile synthesis of SnO2 nanocrystals coated conducting polymer nanowires for enhanced lithium storage , 2012 .

[230]  S. Bereznev,et al.  Photo-assisted electrodeposition of polypyrrole back contact to CdS/CdTe solar cell structures , 2013 .

[231]  H. Yoneyama,et al.  Incorporation of WO 3 into Polypyrrole, and Electrochemical Properties of the Resulting Polymer Films , 1990 .

[232]  Ran Liu,et al.  Highly flexible pseudocapacitor based on freestanding heterogeneous MnO2/conductive polymer nanowire arrays. , 2012, Physical chemistry chemical physics : PCCP.

[233]  G. Chen,et al.  Controlling the nanostructure of electrochemically grown nanoporous composites of carbon nanotubes and conducting polymers , 2004 .

[234]  K. Rajeshwar,et al.  Nanoporous TiO2 and WO3 films by anodization of titanium and tungsten substrates: influence of process variables on morphology and photoelectrochemical response. , 2006, The journal of physical chemistry. B.

[235]  W. Kutner,et al.  Composites of Conducting Polymers and Various Carbon Nanostructures for Electrochemical Supercapacitors , 2013 .

[236]  J. Heinze,et al.  Electrochemistry of conducting polymers--persistent models and new concepts. , 2010, Chemical reviews.

[237]  Xiang Li,et al.  Preparation and electrochemical properties of RuO2/polyaniline electrodes for supercapacitors , 2012 .

[238]  K. Hata,et al.  Actuator of double layer film composed of carbon nanotubes and polypyrroles , 2012 .

[239]  K. Lau,et al.  Electrodeposition and pseudocapacitive properties of tungsten oxide/polyaniline composite , 2011 .

[240]  P. Yáñez‐Sedeño,et al.  Poly-(3-methylthiophene)/carbon nanotubes hybrid composite-modified electrodes , 2007 .

[241]  Yixuan Chen,et al.  Coaxial carbon nanotube–polythiophene core-shell nanowire for efficient hole transport in heterojunction photovoltaic device , 2011 .

[242]  P. Gómez‐Romero,et al.  Electrochemically functionalized carbon nanotubes and their application to rechargeable lithium batteries. , 2006, Small.

[243]  G. Thompson,et al.  Synthesis of anodic films in the presence of aniline and TiO2 nanoparticles on AA2024-T3 aluminium alloy , 2009 .

[244]  P. Patil,et al.  Use of poly(o-toluidine)/ZrO2 nanocomposite coatings for the corrosion protection of mild steel , 2007 .

[245]  Yuan Yuan,et al.  Preparation and photoelectrochemical properties of a hybrid electrode composed of polypyrrole encapsulated in highly ordered titanium dioxide nanotube array , 2008 .

[246]  P. Aubert,et al.  Elaboration of nanohybrid materials by photopolymerisation of 3,4-ethylenedioxythiophene on TiO2. , 2008, Chemical communications.

[247]  S. Kuwabata,et al.  Light image formations on deprotonated polyaniline films containing titania particles , 1993 .

[248]  R. Noufi,et al.  Protection of n ‐ GaAs Photoanodes with Photoelectrochemically Generated Polypyrrole Films , 1980 .

[249]  Heejoon Ahn,et al.  Interfacially treated dye-sensitized solar cell with in situ photopolymerized iodine doped polythiophene. , 2012, ACS applied materials & interfaces.

[250]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[251]  A. Fujishima,et al.  Photoelectrochemical Polymerization of Pyrrole on ZnO and Its Application to Conducting Pattern Generation , 1987 .

[252]  Zhiqun Lin,et al.  Crafting Semiconductor Organic−Inorganic Nanocomposites via Placing Conjugated Polymers in Intimate Contact with Nanocrystals for Hybrid Solar Cells , 2012, Advanced materials.

[253]  Mira Josowicz,et al.  Composites of intrinsically conducting polymers as sensing nanomaterials. , 2008, Chemical reviews.

[254]  P. Schmuki,et al.  Advanced geometries of PEDOT formed in titania nanotubes. , 2012, Chemphyschem : a European journal of chemical physics and physical chemistry.

[255]  Patrik Schmuki,et al.  TiO2 nanotubes: synthesis and applications. , 2011, Angewandte Chemie.

[256]  Joseph Wang,et al.  Carbon-nanotubes doped polypyrrole glucose biosensor , 2005 .

[257]  Lei Zhang,et al.  A review of electrode materials for electrochemical supercapacitors. , 2012, Chemical Society reviews.

[258]  M. Skompska.  Hybrid conjugated polymer/semiconductor photovoltaic cells , 2010 .

[259]  Zhenhua Weng,et al.  Oxidative polymerization of pyrrole photocatalyzed by TiO2nanoparticles and interactions in the composites , 2008 .

[260]  S. Lefrant,et al.  Covalent functionalization of single-walled carbon nanotubes by aniline electrochemical polymerization , 2004 .

[261]  F. Gao,et al.  An electrochemical capacitor electrode based on porous carbon spheres hybrided with polyaniline and nanoscale ruthenium oxide. , 2012, ACS applied materials & interfaces.

[262]  G. Inzelt,et al.  Electron and proton conducting polymers: Recent developments and prospects , 2000 .

[263]  P. Smertenko,et al.  Electrochemically assembled planar hybrid poly(3-methylthiophene)/ZnO nanostructured composites , 2012 .

[264]  H. Bai,et al.  Three-dimensional porous graphene-based composite materials: electrochemical synthesis and application , 2012 .

[265]  Xinyong Li,et al.  Efficient visible light-induced photoelectrocatalytic degradation of rhodamine B by polyaniline-sensitized TiO2 nanotube arrays , 2011 .

[266]  E. Kowsari,et al.  Ultrasound and ionic-liquid-assisted synthesis and characterization of polyaniline/Y2O3 nanocomposite with controlled conductivity. , 2010, Ultrasonics sonochemistry.

[267]  D. Ivey,et al.  Improved capacitive behavior of electrochemically synthesized Mn oxide/PEDOT electrodes utilized as electrochemical capacitors , 2010 .

[268]  Shuhong Yu,et al.  Flexible graphene–polyaniline composite paper for high-performance supercapacitor , 2013 .

[269]  P. Gómez‐Romero,et al.  Poly(N-vinyl carbazole) and carbon nanotubes based composites and their application to rechargeable lithium batteries , 2007 .

[270]  A. Heeger,et al.  Infiltration of Regioregular Poly[2,2′‐(3‐hexylthiopene)] into Random Nanocrystalline TiO2 Networks , 2005 .

[271]  E. Andreoli,et al.  Electrochemical Fabrication of Copper-Based Hybrid Microstructures and Mechanism of Formation of Related Hierarchical Structures on Polypyrrole Films , 2011 .

[272]  Robert Kostecki,et al.  Nanomaterials for renewable energy production and storage. , 2012, Chemical Society reviews.

[273]  W. Li,et al.  Electrodeposition of NiOx/PANI composite film and its catalytic properties towards electrooxidations of polyhydroxyl compounds , 2007 .

[274]  E. Seymour,et al.  Electrochemical quartz crystal microbalance monitoring of cadmium sulfide generation in polypyrrole and polypyrrole-poly(styrenesulfonate) thin films , 1992 .

[275]  Monica Lira-Cantu,et al.  Influence of doped anions on poly(3,4-ethylenedioxythiophene) as hole conductors for iodine-free solid-state dye-sensitized solar cells. , 2008, Journal of the American Chemical Society.

[276]  N. Armstrong,et al.  Photoelectrochemical processes in polymer-tethered CdSe nanocrystals. , 2010, Journal of the American Chemical Society.

[277]  T. Nakahodo,et al.  Synthesis of chiral hybrid nanotubes of magnetite nanoparticles and conducting polymers. , 2012, Nanoscale.

[278]  Mianqi Xue,et al.  Structure‐Based Enhanced Capacitance: In Situ Growth of Highly Ordered Polyaniline Nanorods on Reduced Graphene Oxide Patterns , 2012 .

[279]  T. Mallouk,et al.  Sensitized Polypyrrole-Coated Semiconducting Powders as Materials in Photosystems for Hydrogen Generation , 1989 .

[280]  C. Debiemme-Chouvy,et al.  An insight into the overoxidation of polypyrrole materials , 2008 .

[281]  G. Shi,et al.  Electrochromic properties of poly(3-chlorothiophene) film electrodeposited on a nanoporous TiO2 surface via a room temperature ionic liquid and its application in an electrochromic device , 2008 .

[282]  C. Visy,et al.  Conducting polymer-based hybrid assemblies for electrochemical sensing: a materials science perspective , 2013, Analytical and Bioanalytical Chemistry.

[283]  A. Ramanavičius,et al.  Stabilization of (CdSe)ZnS quantum dots with polypyrrole formed by UV/VIS irradiation initiated polymerization. , 2009, Journal of nanoscience and nanotechnology.

[284]  A. Fujishima,et al.  GENERATION OF ORGANIC CONDUCTING PATTERNS ON SEMICONDUCTORS BY PHOTOELECTROCHEMICAL POLYMERIZATION OF PYRROLE , 1986 .

[285]  A. Ivaska,et al.  Poly(3,4-ethylenedioxythiophene) (PEDOT) doped with carbon nanotubes as ion-to-electron transducer in polymer membrane-based potassium ion-selective electrodes , 2009 .

[286]  Xiuyuan Ni,et al.  Photovoltaic hybrid films with polythiophene growing on monoclinic WO3 semiconductor substrates. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[287]  Bin Chen,et al.  Electrochemical Synthesis and Photovoltaic Property of Cadmium Sulfide−Polybithiophene Interdigitated Nanohybrid Thin Films , 2008 .

[288]  Jenny Nelson,et al.  Hybrid polymer–metal oxide solar cells by in situ chemical polymerization , 2009 .

[289]  Xiaodong Chen,et al.  A “skeleton/skin” strategy for preparing ultrathin free-standing single-walled carbon nanotube/polyaniline films for high performance supercapacitor electrodes , 2012 .

[290]  Li Zhang,et al.  A photoelectrochemical solar cell based on ZnO/dye/polypyrrole film electrode as photoanode , 2000 .

[291]  M. Paoli,et al.  Polymers in dye sensitized solar cells: overview and perspectives , 2004 .

[292]  M. Pumera,et al.  Covalent chemistry on graphene. , 2013, Chemical Society reviews.

[293]  Hao Zhang,et al.  Tube-covering-tube nanostructured polyaniline/carbon nanotube array composite electrode with high capacitance and superior rate performance as well as good cycling stability , 2008 .

[294]  C. Deslouis,et al.  Oxide/polypyrrole composite films for corrosion protection of iron , 2002 .

[295]  S. Kuwabata,et al.  Preparation and Electrochemical Properties of WO 3 ‐ Incorporated Polyaniline Films , 1992 .

[296]  S. Kuwabata,et al.  Photo-induced electrochromic reactions of deprotonated polyaniline containing cadmium sulfide particles , 1994 .

[297]  G. Olah,et al.  Novel single step electrochemical route to γ-MnO2 nanoparticle-coated polyaniline nanofibers: Thermal stability and formic acid oxidation on the resulting nanocomposites , 2008 .

[298]  I. Losito,et al.  Electrosynthesis and analytical characterisation of polypyrrole thin films modified with copper nanoparticles , 2001 .

[299]  K. Rajeshwar,et al.  Mechanistic Aspects of Photoelectrochemical Polymerization of Polypyrrole on a TiO2 Nanotube Array , 2014 .

[300]  A. Mauger,et al.  New composite cathode material for Zn//MnO2 cells obtained by electro-deposition of polybithiophene on manganese dioxide particles , 2011 .

[301]  Maria Forsyth,et al.  High Rates of Oxygen Reduction over a Vapor Phase–Polymerized PEDOT Electrode , 2008, Science.

[302]  V. Ahmadi,et al.  Fast switching and high contrast electrochromic device based on PEDOT nanotube grown on ZnO nanowires , 2013 .

[303]  A. Ramanavičius,et al.  Conducting polymer-based nanostructurized materials: electrochemical aspects , 2005, Nanotechnology.

[304]  Guofa Cai,et al.  Dual electrochromic film based on WO3/polyaniline core/shell nanowire array , 2014 .

[305]  Guihua Yu,et al.  Three-dimensional hierarchical ternary nanostructures for high-performance Li-ion battery anodes. , 2013, Nano letters.

[306]  Zhongwei Chen,et al.  Graphene-Based Flexible Supercapacitors: Pulse-Electropolymerization of Polypyrrole on Free-Standing Graphene Films , 2011 .

[307]  Sung-Hae Park,et al.  A novel hole transport material for iodine-free solid state dye-sensitized solar cells. , 2011, Chemical communications.

[308]  E. Rios,et al.  Poly(3,4-ethylenedioxithiophene)/MnO2 composite electrodes for electrochemical capacitors , 2011 .

[309]  Tarmo Tamm,et al.  On the unexpected cation exchange behavior, caused by covalent bond formation between PEDOT and Cl- ions: extending the conception for the polymer-dopant interactions. , 2012, The journal of physical chemistry. B.

[310]  A. Ehsani,et al.  Electrosynthesis of polypyrrole composite film and electrocatalytic oxidation of ethanol , 2012 .

[311]  W. Chiu,et al.  Novel poly(3-methylthiophene)-TiO2 hybrid materials for photovoltaic cells , 2006 .

[312]  K. Lau,et al.  Electrochemical codeposition of nickel oxide and polyaniline , 2009 .

[313]  Yuyan Shao,et al.  Graphene-polypyrrole nanocomposite as a highly efficient and low cost electrically switched ion exchanger for removing ClO₄⁻ from wastewater. , 2011, ACS applied materials & interfaces.

[314]  Dongxue Han,et al.  Electropolymerization and catalysis of well-dispersed polyaniline/carbon nanotube/gold composite , 2007 .

[315]  Zhanhu Guo,et al.  Hybrid Electrochromic Fluorescent Poly(DNTD)/CdSe@ZnS Composite Films , 2012 .

[316]  A. Bard,et al.  Semiconductor Electrodes XXXIX . Techniques for Stabilization of n‐Silicon Electrodes in Aqueous Solution Photoelectrochemical Cells , 1981 .

[317]  S. Ivanov,et al.  Electrochemical synthesis and characterization of TiO2-polyaniline composite layers , 2007 .

[318]  M. Jouini,et al.  Improvement of the Electrosynthesis and Physicochemical Properties of Poly(3,4-ethylenedioxythiophene) Using a Sodium Dodecyl Sulfate Micellar Aqueous Medium , 1999 .

[319]  Yongxiang Li,et al.  Using room temperature ionic liquid to fabricate PEDOT/TiO2 nanocomposite electrode-based electrochromic devices with enhanced long-term stability , 2008 .

[320]  Yunzhi Liu,et al.  Infiltrating Semiconducting Polymers into Self‐Assembled Mesoporous Titania Films for Photovoltaic Applications , 2003 .

[321]  O. Inganäs,et al.  Good adhesion between chemically oxidised titanium and electrochemically deposited polypyrrole , 2000 .

[322]  J. Heinze,et al.  Electropolymerization of pyrrole and electrochemical study of polypyrrole: 1. Evidence for structural diversity of polypyrrole , 1999 .

[323]  J. Tu,et al.  Porous NiO/poly(3,4-ethylenedioxythiophene) films as anode materials for lithium ion batteries , 2010 .

[324]  M. El‐Kady,et al.  Three-dimensional core-shell hybrid solar cells via controlled in situ materials engineering. , 2012, Nano letters.

[325]  G. Lu,et al.  Fabrication of Graphene/Polyaniline Composite Paper via In Situ Anodic Electropolymerization for High-Performance Flexible Electrode. , 2009, ACS nano.

[326]  M. Pumera,et al.  Stacked graphene nanofibers doped polypyrrole nanocomposites for electrochemical sensing , 2010 .

[327]  Wei-min Liu,et al.  Highly flexible coaxial nanohybrids made from porous TiO2 nanotubes. , 2009, ACS nano.

[328]  Yanzhong Hao,et al.  Efficient Semiconductor-Sensitized Solar Cells Based on Poly(3-hexylthiophene)@CdSe@ZnO Core−Shell Nanorod Arrays , 2010 .

[329]  C. Oueiny,et al.  Carbon nanotube–polyaniline composites , 2014 .

[330]  C. Visy,et al.  Magnetic hybrid modified electrodes, based on magnetite nanoparticle containing polyaniline and poly(3,4-ethylenedioxythiophene) , 2011 .

[331]  F. Beck,et al.  Anodic formation of polypyrrole/tungsten trioxide composites , 1993 .