Predicting Progressive Delamination of Composite Material Specimens via Interface Elements

This article describes the application of interface elements to the prediction of progressive delamination in composite materials. The work has been implemented in two separate commercial finite-element computer packages, ABAQUS [1] and LUSAS [2]. In the former case, this has been achieved via a "user subroutine", while in the latter case the elements are embedded directly within the system, either in the standard "release version" of the code or in a research version, to which the authors have access and in which they have implemented various algorithms directly. Comparisons are made with a range of experimental results for composite material specimens. In addition to the finite-element solutions, closed-form results are also presented that are based on a corrected beam theory.

[1]  M. A. Crisfield,et al.  Progressive Delamination Using Interface Elements , 1998 .

[2]  J. G. Williams,et al.  The failure of fibre composites and adhesively bonded fibre composites under high rates of test , 1995 .

[3]  Viggo Tvergaard,et al.  Toughness of an interface along a thin ductile layer joining elastic solids , 1994 .

[4]  Michael R Wisnom,et al.  A combined stress-based and fracture-mechanics-based model for predicting delamination in composites , 1993 .

[5]  J. Hutchinson,et al.  The influence of plasticity on mixed mode interface toughness , 1993 .

[6]  Cv Clemens Verhoosel,et al.  Non-Linear Finite Element Analysis of Solids and Structures , 1991 .

[7]  Jr. J. Crews,et al.  Mixed-Mode Bending Method for Delamination Testing , 1990 .

[8]  J. C. Simo,et al.  A CLASS OF MIXED ASSUMED STRAIN METHODS AND THE METHOD OF INCOMPATIBLE MODES , 1990 .

[9]  John H. Crews,et al.  The mixed-mode bending method for delamination testing , 1989 .

[10]  Alberto Corigliano,et al.  Damage analysis of interlaminar fracture specimens , 1995 .

[11]  de R René Borst,et al.  Free edge delamination in carbon-epoxy laminates: a novel numerical/experimental approach , 1994 .

[12]  J. G. Williams,et al.  The mixed-mode delamination of fibre composite materials , 1993 .

[13]  Richard Schapery,et al.  A technique for predicting mode I energy release rates using a first-order shear deformable plate theory , 1990 .

[14]  M. Kanninen,et al.  A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .