Computation of vertically averaged velocities in irregular sections of straight channels

Two new methods for vertically averaged velocity computation are presented, validated and compared with other available formulas. The first method derives from the well-known Huthoff algorithm, which is first shown to be dependent on the way the river cross section is discretized into several subsections. The second method assumes the vertically averaged longitudinal velocity to be a function only of the friction factor and of the so-called "local hydraulic radius", computed as the ratio between the integral of the elementary areas around a given vertical and the integral of the elementary solid boundaries around the same vertical. Both integrals are weighted with a linear shape function equal to zero at a distance from the integration variable which is proportional to the water depth according to an empirical coefficient β. Both formulas are validated against (1) laboratory experimental data, (2) discharge hydrographs measured in a real site, where the friction factor is estimated from an unsteady-state analysis of water levels recorded in two different river cross sections, and (3) the 3-D solution obtained using the commercial ANSYS CFX code, computing the steady-state uniform flow in a cross section of the Alzette River.

[1]  Koji Shiono,et al.  Inter-comparison and validation of computational fluid dynamics codes in two-stage meandering channel flows , 2013 .

[2]  D. Knight,et al.  Modelling secondary cells and sediment transport in rectangular channels , 2010 .

[3]  P. Moreta,et al.  Apparent friction coefficient in straight compound channels , 2010 .

[4]  C. Aricò,et al.  Using unsteady-state water level data to estimate channel roughness and discharge hydrograph , 2009 .

[5]  D. Knight,et al.  Lateral Depth-Averaged Velocity Distributions and Bed Shear in Rectangular Compound Channels , 2008 .

[6]  D. Knight,et al.  Analytic Stage-Discharge Formulas for Flow in Straight Prismatic Channels , 2007 .

[7]  R. Ferguson.  Flow resistance equations for gravel‐ and boulder‐bed streams , 2007 .

[8]  T. Moramarco,et al.  A methodology for discharge estimation and rating curve development at ungauged river sites , 2007 .

[9]  Gareth Pender,et al.  Flow Resistance and Momentum Flux in Compound Open Channels , 2006 .

[10]  Donald W. Knight,et al.  A practical approach to estimating the flow capacity of rivers ‚Äì Application and analysis , 2006 .

[11]  J. A. Battjes,et al.  Momentum Exchange in Straight Uniform Compound Channel Flow , 2005 .

[12]  Donald W. Knight,et al.  Stage-discharge prediction for rivers in flood applying a depth-averaged model , 2004 .

[13]  John O'Sullivan,et al.  The influence of planform on flow resistance in mobile bed compound channels , 2001 .

[14]  T. Sturm,et al.  Open Channel Hydraulics , 2001 .

[15]  Y. Zech,et al.  Momentum transfer for practical flow computation in compound channels , 1999 .

[16]  C. Thorne,et al.  Secondary Currents around Braid Bar in Brahmaputra River, Bangladesh , 1998 .

[17]  Donald W. Knight,et al.  REFINED CALIBRATION OF A DEPTH-AVERAGED MODEL FOR TURBULENT FLOW IN A COMPOUND CHANNEL. , 1996 .

[18]  M. Lambert,et al.  Discharge prediction in straight compound channels using the mixing length concept , 1996 .

[19]  D. G. Rhodes,et al.  Velocity and boundary shear in a wide compound duct , 1994 .

[20]  P. Ackers.  Flow formulae for straight two-stage channels , 1993 .

[21]  Ben Chie Yen,et al.  Channel Flow Resistance: Centennial of Manning's Formula , 1992 .

[22]  D. Knight,et al.  Turbulent open-channel flows with variable depth across the channel , 1991, Journal of Fluid Mechanics.

[23]  D. Stephenson,et al.  Effects of momentum transfer in compound channels , 1990 .

[24]  W. R. C. Myers,et al.  Flow resistance in compound channels , 1990 .

[25]  Donald W. Knight,et al.  The SERC Flood Channel Facility , 1987 .

[26]  Peter R. Wormleaton,et al.  Flow Distribution in Compound Channels , 1985 .

[27]  D. Knight,et al.  Boundary Shear in Symmetrical Compound Channels , 1984 .

[28]  D. Knight,et al.  Flood Plain and Main Channel Flow Interaction , 1983 .

[29]  P. R. Wormleaton,et al.  Discharge Assessment in Compound Channel Flow , 1982 .

[30]  B. Launder,et al.  Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc , 1974 .

[31]  W. Jones,et al.  The prediction of laminarization with a two-equation model of turbulence , 1972 .

[32]  J. Nash,et al.  River flow forecasting through conceptual models part I — A discussion of principles☆ , 1970 .

[33]  R. Sellin.  A laboratory investigation into the interaction between the flow in the channel of a river and that over its flood plain , 1964 .

[34]  R. J. Ohn.  A LABORATORY INVESTIGATION INTO THE INTERACTION BETWEEN THE FLOW IN THE CHANNEL OF A RIVER AND THAT OVER ITS FLOOD PLAIN BV , 2010 .

[35]  Denie C. M. Augustijn,et al.  Discussion and Closure: Interacting Divided Channel Method for Compound Channel Flow , 2009 .

[36]  Costanza Aricò,et al.  A MARCHING IN SPACE AND TIME (MAST) SOLVER OF THE SHALLOW WATER EQUATIONS , 2006 .

[37]  Klaus Hoyer,et al.  Sediment Transport: A Geophysical Phenomenon , 2006 .

[38]  Clifford H. Thurber,et al.  Parameter estimation and inverse problems , 2005 .

[39]  D. Knight,et al.  Stage-Discharge Assessment in Compound Meandering Channels , 1999 .