Improvement in cold formability of AZ31 magnesium alloy sheets processed by equal channel angular pressing

[1]  J. Jonas,et al.  Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions , 2014 .

[2]  Yuman Zhu,et al.  Periodic Segregation of Solute Atoms in Fully Coherent Twin Boundaries , 2013, Science.

[3]  D. Hernández-Silva,et al.  Microstructure and texture development in hydrostatically extruded Mg–Al–Zn alloys during tensile testing at intermediate temperatures , 2013 .

[4]  F. Chmelík,et al.  Grain size effects on deformation twinning in an extruded magnesium alloy tested in compression , 2011 .

[5]  K. Kainer,et al.  Effect of rare earth elements on the microstructure and texture development in magnesium-manganese alloys during extrusion , 2010 .

[6]  K. Kainer,et al.  Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets , 2010 .

[7]  Yi Sun,et al.  Enhancing room temperature mechanical properties of Mg–9Al–Zn alloy by multi-pass equal channel angular extrusion , 2010 .

[8]  D. Steglich,et al.  Mechanical characterisation of Mg alloys and model parameter identification for sheet forming simulations , 2009 .

[9]  S. Zaefferer,et al.  Twinning-related microstructural evolution during hot rolling and subsequent annealing of pure magnesium , 2009 .

[10]  Helmut Schaeben,et al.  A novel pole figure inversion method: specification of the MTEX algorithm , 2008 .

[11]  T. Zhou,et al.  Improvement of Drawability at Room Temperature in AZ31 Magnesium Alloy Sheets Processed by Equal Channel Angular Rolling , 2008 .

[12]  M. Barnett.  Twinning and the ductility of magnesium alloys Part I: “Tension” twins , 2007 .

[13]  T. Mukai,et al.  Effect of temperature of differential speed rolling on room temperature mechanical properties and texture in an AZ31 magnesium alloy , 2007 .

[14]  Young-Hoon Chung,et al.  Grain refinement of steel plate by continuous equal-channel angular process , 2004 .

[15]  J. Bohlen,et al.  Cold rolling textures in AZ31 wrought magnesium alloy , 2004 .

[16]  Donald W. Brown,et al.  Enhanced ductility in strongly textured magnesium produced by equal channel angular processing , 2004 .

[17]  W. Kim,et al.  Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing , 2003 .

[18]  J. Suh,et al.  Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing , 2002 .

[19]  T. Mukai,et al.  Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure , 2001 .

[20]  Terence G. Langdon,et al.  The shearing characteristics associated with equal-channel angular pressing , 1998 .

[21]  T. Langdon,et al.  Principle of equal-channel angular pressing for the processing of ultra-fine grained materials , 1996 .

[22]  S. Semiatin,et al.  Workability of a gamma titanium aluminide alloy during equal channel angular extrusion , 1995 .

[23]  F. J. Humphreys,et al.  Dynamic recrystallisation and the development of microstructure during the high temperature deformation of magnesium , 1982 .

[24]  P. G. Partridge.  The crystallography and deformation modes of hexagonal close-packed metals , 1967 .

[25]  J. Bohlen,et al.  Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets , 2010 .

[26]  George Ellwood Dieter,et al.  Workability testing techniques , 1984 .

[27]  J. L. Haughlinton,et al.  Magnesium and its alloys , 1937 .