A coupled discrete element-finite difference model of selective laser sintering

[1]  Jeff Hecht,et al.  Understanding Lasers , 2018 .

[2]  Rezaul Karim,et al.  Laser Material Processing , 2018 .

[3]  S. Khairallah,et al.  Mesoscopic Simulation Model of Selective Laser Melting of Stainless Steel Powder , 2014 .

[4]  Wei Qingsong,et al.  Effect of molten pool boundaries on the mechanical properties of selective laser melting parts , 2014 .

[5]  Eduardo M B Campello,et al.  A computational framework for simulation of the delivery of substances into cells , 2014, International journal for numerical methods in biomedical engineering.

[6]  K. Senthilkumaran,et al.  Numerical and experimental investigations on laser melting of stainless steel 316L metal powders , 2014 .

[7]  T. Zohdi.  Additive particle deposition and selective laser processing-a computational manufacturing framework , 2014 .

[8]  Jerome Solberg,et al.  Implementation of a thermomechanical model for the simulation of selective laser melting , 2014 .

[9]  D. Gu,et al.  Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments , 2014 .

[10]  T. Zohdi.  A direct particle-based computational framework for electrically enhanced thermo-mechanical sintering of powdered materials , 2014 .

[11]  Tarek I. Zohdi,et al.  Multiphysics modeling and simulation of selective laser sintering manufacturing processes , 2014 .

[12]  Carolin Körner,et al.  Fundamental consolidation mechanisms during selective beam melting of powders , 2013 .

[13]  Tarek I. Zohdi,et al.  Rapid Simulation of Laser Processing of Discrete Particulate Materials , 2013 .

[14]  Sergio Andres Galindo-Torres,et al.  A coupled Discrete Element Lattice Boltzmann Method for the simulation of fluid-solid interaction with particles of general shapes , 2013 .

[15]  Robby Ebert,et al.  Laser Processing of Tungsten Powder with Femtosecond Laser Radiation , 2012 .

[16]  P. Wriggers,et al.  A two-scale model of granular materials , 2012 .

[17]  B. Stucker,et al.  A review of thermal analysis methods in Laser Sintering and Selective Laser Melting , 2012 .

[18]  C. Körner,et al.  Mesoscopic simulation of selective beam melting processes , 2011 .

[19]  Andrey V. Gusarov,et al.  Model of Radiation and Heat Transfer in Laser-Powder Interaction Zone at Selective Laser Melting , 2009 .

[20]  Édouard Canot,et al.  Various Approaches for Solving Problems in Heat Conduction with Phase Change , 2009 .

[21]  S. Ahzi,et al.  Three-dimensional transient finite element analysis of the selective laser sintering process , 2009 .

[22]  Randall J. LeVeque,et al.  Finite difference methods for ordinary and partial differential equations - steady-state and time-dependent problems , 2007 .

[23]  Michael Schmidt,et al.  Selective laser sintering of PEEK , 2007 .

[24]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[25]  Abdolreza Simchi,et al.  Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features , 2006 .

[26]  Colleen L Flanagan,et al.  Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.

[27]  J. Kruth,et al.  Modelling of radiation transfer in metallic powders at laser treatment , 2005 .

[28]  Rémy Glardon,et al.  Temperature measurements during selective laser sintering of titanium powder , 2004 .

[29]  T. Childs,et al.  Laser sintering (SLS) of hard metal powders for abrasion resistant coatings , 2004 .

[30]  Rémy Glardon,et al.  3D FE simulation for temperature evolution in the selective laser sintering process , 2004 .

[31]  Abdolreza Simchi,et al.  Effects of laser sintering processing parameters on the microstructure and densification of iron powder , 2003 .

[32]  K. Leong,et al.  Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.

[33]  Eric Perkins,et al.  Generalized Spatial Binning of Bodies of Different Sizes , 2002 .

[34]  K. Osakada,et al.  Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing , 2002 .

[35]  George G. Adams,et al.  Contact modeling — forces , 2000 .

[36]  S. Kou,et al.  Experiments to simulate effect of Marangoni convection on weld pool shape , 2000 .

[37]  J. Barbera,et al.  Contact mechanics , 1999 .

[38]  J. Beaman,et al.  Model of the selective laser sintering of bisphenol-A polycarbonate , 1993 .

[39]  Gunter H. Meyer,et al.  THE NUMERICAL SOLUTION OF PHASE CHANGE PROBLEMS , 1987 .