Influence of oxygen deficiency in indium tin oxide on the performance of polymer light-emitting diodes

[1]  Ho-Chul Lee,et al.  Round pinholes in indium-tin-oxide thin films on the glass substrates: a Taguchi method analysis and theoretical approach to their origins , 2004 .

[2]  Moon-Ho Lee,et al.  Relationship between Surface Roughness of Indium Tin Oxide and Leakage Current of Organic Light-Emitting Diode , 2003 .

[3]  Sui‐Dong Wang,et al.  Vibrational analysis of oxygen-plasma treated indium tin oxide , 2003 .

[4]  Vasco Teixeira,et al.  Amorphous ITO thin films prepared by DC sputtering for electrochromic applications , 2002 .

[5]  S. Chen,et al.  Effect of structure ordering on charge carrier mobilities in green-emitting poly(phenylene vinylene)s , 2002 .

[6]  C. Granqvist,et al.  Transparent and conducting ITO films: new developments and applications , 2002 .

[7]  Soo Jin Chua,et al.  Degradation and failure of organic light-emitting devices , 2002 .

[8]  S. Chen,et al.  Nanoscale surface electrical properties of indium–tin–oxide films for organic light emitting diodes investigated by conducting atomic force microscopy , 2001 .

[9]  Alberto Piqué,et al.  Electrical, optical, and structural properties of indium–tin–oxide thin films for organic light-emitting devices , 1999 .

[10]  Kok Wai Wong,et al.  CHARACTERIZATION OF TREATED INDIUM-TIN-OXIDE SURFACES USED IN ELECTROLUMINESCENT DEVICES , 1999 .

[11]  Xiaoyuan Hou,et al.  Enhanced hole injection in a bilayer vacuum-deposited organic light-emitting device using a p-type doped silicon anode , 1999 .

[12]  Franco Cacialli,et al.  Indium-tin oxide treatments for single- and double-layer polymeric light-emitting diodes: The relation between the anode physical, chemical, and morphological properties and the device performance , 1998 .

[13]  Paul Davids,et al.  Charge injection and transport in single-layer organic light-emitting diodes , 1998 .

[14]  I. A. Hümmelgen,et al.  Tin Oxide as a Cathode in Organic Light‐Emitting Diodes , 1998 .

[15]  Kuen-Ru Chuang,et al.  Failure phenomena and mechanisms of polymeric light‐emitting diodes: Indium–tin–oxide damage , 1996 .

[16]  M. Watamori,et al.  The effects of oxygen content on electrical and optical properties of indium tin oxide films fabricated by reactive sputtering , 1996 .

[17]  J. E. Meerakker,et al.  (Photo)electrochemical characterization of tin‐doped indium oxide , 1993 .

[18]  T. Karasawa,et al.  Electrical and optical properties of indium tin oxide thin films deposited on unheated substrates by d.c. reactive sputtering , 1993 .

[19]  R. Friend,et al.  Electroluminescence from multilayer conjugated polymer devices: Spatial control of exciton formation and emission , 1992 .

[20]  R. N. Marks,et al.  Light-emitting diodes based on conjugated polymers , 1990, Nature.

[21]  C. Tang,et al.  Organic Electroluminescent Diodes , 1987 .

[22]  M. Buchanan,et al.  Preparation of conducting and transparent thin films of tin‐doped indium oxide by magnetron sputtering , 1980 .

[23]  John B. Goodenough,et al.  X-ray photoemission spectroscopy studies of Sn-doped indium-oxide films , 1977 .

[24]  G. Haacke.  New figure of merit for transparent conductors , 1976 .