Experimental study on film cooling performance of imperfect holes
暂无分享,去创建一个
[1] Robert P. Schroeder,et al. Blockage Effects From Simulated Thermal Barrier Coatings for Cylindrical and Shaped Cooling Holes , 2014 .
[2] Zhang Jing-zhou,et al. Numerical Investigation of Partial Blockage Effect on Film Cooling Effectiveness , 2014 .
[3] D. Yan. Investigation on Characteristics of Multiple Rows of Opposite Lateral Ejection Angle Film Cooling , 2013 .
[4] Zhou Jun-hu. Numerical Investigation on Particle Deposition Characteristic Inside Turbine Cascade , 2013 .
[5] Jingzhou Zhang,et al. Experimental investigation on film cooling characteristics from a row of holes with ridge-shaped tabs , 2012 .
[6] B. Jubran,et al. Numerical investigation of the influence of a hole imperfection on film cooling effectiveness , 2011 .
[7] van Aa Anton Steenhoven,et al. Effect of hole imperfection on adiabatic film cooling effectiveness , 2008 .
[8] Y. Okita,et al. Film Effectiveness Performance of an Arrowhead-Shaped Film-Cooling Hole Geometry , 2007 .
[9] Srinath V. Ekkad,et al. Effect of Trench Width and Depth on Film Cooling From Cylindrical Holes Embedded in Trenches , 2007 .
[10] Ruwan P. Somawardhana,et al. Effects of Obstructions and Surface Roughness on Film Cooling Effectiveness With and Without a Transverse Trench , 2007 .
[11] Widen Tabakoff,et al. Erosion and Deposition in Turbomachinery , 2006 .
[12] van Aa Anton Steenhoven,et al. Influence of hole imperfection on jet cross flow interaction , 2006 .
[13] F. J. Cunha,et al. Effects of Coating Blockage and Deposit on Film Cooling Effectiveness and Heat Transfer , 2006 .
[14] Michael Gritsch,et al. Effect of Hole Geometry on the Thermal Performance of Fan-Shaped Film Cooling Holes , 2005 .
[15] Ronald Scott Bunker,et al. A review of shaped hole turbine film-cooling technology , 2005 .
[16] Srinath V. Ekkad,et al. Improved film cooling from cylindrical angled holes with triangular tabs: effect of tab orientations , 2003 .