Critical deposition height for sustainable restoration via laser additive manufacturing

[1]  Miltos D. Grammatikakis,et al.  State-of-the-Art and Challenges , 2018, Distributed Real-Time Architecture for Mixed-Criticality Systems.

[2]  G. R. Johnson,et al.  A CONSTITUTIVE MODEL AND DATA FOR METALS SUBJECTED TO LARGE STRAINS, HIGH STRAIN RATES AND HIGH TEMPERATURES , 2018 .

[3]  Lei Hu,et al.  Influence of martensitic transformation on welding residual stress in plates and pipes , 2017 .

[4]  Tania Regina Shoeninger Rauen,et al.  Sustainability and Innovation in the Automotive Sector: A Structured Content Analysis , 2017 .

[5]  R. Singh,et al.  Experimental Characterization of Clad Microstructure and its Correlation with Residual Stresses , 2017 .

[6]  R. Singh,et al.  Thermal model for additive restoration of mold steels using crucible steel , 2016 .

[7]  Darli Rodrigues Vieira,et al.  Maintenance, Repair and Overhaul (MRO) Fundamentals and Strategies: An Aeronautical Industry Overview , 2016 .

[8]  Thilo Pirling,et al.  A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components , 2016 .

[9]  A. Mertens,et al.  Laser cladding as repair technology for Ti–6Al–4V alloy: Influence of building strategy on microstructure and hardness , 2015 .

[10]  Wenyi Yan,et al.  Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications , 2015 .

[11]  Sangwon Suh,et al.  Industrial Ecology: The role of manufactured capital in sustainability , 2015, Proceedings of the National Academy of Sciences.

[12]  Wenyi Yan,et al.  Finite Element Simulation of Laser Cladding for Tool Steel Repair , 2015 .

[13]  O. Edenhofer.  Climate change 2014 : mitigation of climate change : Working Group III contribution to the fifth assessment report of the Intergovernmental Panel on Climate Change , 2015 .

[14]  M. H. Duong,et al.  Integrated Risk and Uncertainty Assessment of Climate Change Response Policies , 2014 .

[15]  Santosh Kumar,et al.  Thermo-metallurgical and thermo-mechanical computations for laser welded joint in 9Cr–1Mo(V, Nb) ferritic/martensitic steel , 2014 .

[16]  R. Singh,et al.  Residual Stress Modeling of Powder Injection Laser Surface Cladding for Die Repair Applications , 2014 .

[17]  M. Brandt,et al.  The Role of Metallurgical Solid State Phase Transformations on the Formation of Residual Stress in Laser Cladding and Heating , 2014 .

[18]  達雄 井上.  “Introduction to Finite Strain Theory for Continuum Elasto-Plasticity” （連続体弾塑性力学における有限ひずみ理論） , 2013 .

[19]  Lijue Xue,et al.  Freeform Laser Consolidated H13 and CPM 9V Tool Steels , 2013, Metallography, Microstructure, and Analysis.

[20]  Yuki Yamakawa,et al.  Introduction to Finite Strain Theory for Continuum Elasto-Plasticity: Hashiguchi/Introduction to Finite Strain Theory for Continuum Elasto-Plasticity , 2012 .

[21]  Global Energy Assessment Writing Team.  Global Energy Assessment: Toward a Sustainable Future , 2012 .

[22]  L. Xue,et al.  Laser Cladding of High‐Performance CPM Tool Steels on Hardened HI 3 Hot‐Work Tool Steel for Automotive Tooling Applications , 2012 .

[23]  N. Surti.  Prologue , 2012, Journal of pharmacy & bioallied sciences.

[24]  Gea Writing Team.  Global Energy Assessment (GEA): Contents , 2012 .

[25]  Thomas B. Johansson,et al.  Global Energy Assessment (GEA) , 2012 .

[26]  N. Nakicenovic,et al.  The Global Energy Assessment , 2012 .

[27]  Keywan Riahi,et al.  Energy Pathways for Sustainable Development , 2012 .

[28]  N. Nakicenovic,et al.  Global Energy Assessment – Toward a Sustainable Future , 2012 .

[29]  D. Agard,et al.  Microtubule nucleation by γ-tubulin complexes , 2011, Nature Reviews Molecular Cell Biology.

[30]  M. Brandt,et al.  Laser cladding as a potential repair technology for damaged aircraft components , 2011 .

[31]  Radovan Kovacevic,et al.  Numerical and experimental study of thermally induced residual stress in the hybrid laser–GMA welding process , 2011 .

[32]  C. Sanz,et al.  Laser Cladding of Vanadium-Carbide Tool Steels for Die Repair , 2011 .

[33]  Corinne Le Quéré,et al.  Rapid growth in CO2 emissions after the 2008-2009 global financial crisis , 2011 .

[34]  Minlin Zhong,et al.  Laser surface cladding: The state of the art and challenges , 2010 .

[35]  M. Peel,et al.  Study of residual stresses generated inside laser cladded plates using FEM and diffraction of synchrotron radiation , 2010 .

[36]  K. Palaniradja,et al.  Residual Stresses in Case Hardened Materials , 2010 .

[37]  H. Haberl,et al.  Growth in global materials use, GDP and population during the 20th century , 2009 .

[38]  L. Costa,et al.  Laser powder deposition , 2009 .

[39]  Simon Buckle,et al.  Mitigation of climate change , 2009, The Daunting Climate Change.

[40]  Yung C. Shin,et al.  Predictive modeling and experimental results for residual stresses in laser hardening of AISI 4140 steel by a high power diode laser , 2009 .

[41]  U. Lienert,et al.  Residual stress distribution in steel butt welds measured using neutron and synchrotron diffraction , 2009, Journal of physics. Condensed matter : an Institute of Physics journal.

[42]  D. Deng.  FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects , 2009 .

[43]  John Dowden,et al.  The theory of laser materials processing : heat and mass transfer in modern technology , 2009 .

[44]  J. Dowden.  The Theory of Laser Materials Processing , 2009 .

[45]  P. Bahr,et al.  Sampling: Theory and Applications , 2020, Applied and Numerical Harmonic Analysis.

[46]  K. Nikbin,et al.  Effect of Phase Transformation onset Temperature on Residual Stress in Welded Thin Steel Plates , 2008 .

[47]  Shreyes N. Melkote,et al.  Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel , 2008 .

[48]  Wolfgang Lucht,et al.  Tipping elements in the Earth's climate system , 2008, Proceedings of the National Academy of Sciences.

[49]  E. A. de Souza Neto,et al.  Computational methods for plasticity , 2008 .

[50]  Michael K.H. Leung,et al.  Theoretical and experimental studies on laser transformation hardening of steel by customized beam , 2007 .

[51]  W. Wang,et al.  Component repair using laser direct metal deposition , 2007 .

[52]  Sheng-Hui Wang,et al.  A study of the abrasive wear behaviour of laser-clad tool steel coatings , 2006 .

[53]  Frank Vollertsen,et al.  State of the art of Laser Hardening and Cladding , 2005 .

[54]  N. Petrinic,et al.  Introduction to computational plasticity , 2005 .

[55]  E. Toyserkani,et al.  3-D finite element modeling of laser cladding by powder injection: effects of laser pulse shaping on the process , 2004 .

[56]  Hubertus J.M. Geijselaers,et al.  Numerical simulation of stresses due to solid state transformations. , 2003 .

[57]  S. David,et al.  Welding: Solidification and microstructure , 2003 .

[58]  Tso-Liang Teng,et al.  Effect of welding sequences on residual stresses , 2003 .

[59]  Rui M. Vilar,et al.  Laser cladding , 2003, Advanced Laser Technologies.

[60]  Gerry Byrne,et al.  Laser cladding of aerospace materials , 2002 .

[61]  J. Ion.  Laser Transformation Hardening , 2002 .

[62]  Frank W. Liou,et al.  Laser Aided Part Repair-a Review , 2002 .

[63]  Jutta Rohde,et al.  Literature review of heat treatment simulations with respect to phase transformation, residual stresses and distortion , 2000 .

[64]  M. Berveiller,et al.  Mechanics of solids with phase changes , 1997 .

[65]  S. Denis.  Considering Stress-Phase Transformation Interactions in the Calculation of Heat Treatment Residual Stresses , 1996 .

[66]  K. Bathe.  Finite Element Procedures , 1995 .

[67]  M. Rappaz,et al.  A simple but realistic model for laser cladding , 1994 .

[68]  F. Samuel,et al.  Effect of cooling rate on the solidification , 1992, Metallurgical and Materials Transactions A.

[69]  F. Samuel,et al.  Effect of cooling rate on the solidification behavior of Al-7 Pct Si-SiCp metal-matrix composites , 1992 .

[70]  John Goldak,et al.  Transformation Plasticity and Residual Stresses in Single-Pass Repair Welds , 1992 .

[71]  G. E. Brown.  Remarks on industrial ecology. , 1992, Proceedings of the National Academy of Sciences of the United States of America.

[72]  S. Na,et al.  Effect of transformation plasticity on residual stress fields in laser surface hardening treatment , 1991 .

[73]  G. Abbaschian,et al.  The effect of solidification rate on microsegregation , 1986 .

[74]  Michael F. Ashby,et al.  The transformation hardening of steel surfaces by laser beams—I. Hypo-eutectoid steels , 1984 .

[75]  P. H. Shingu,et al.  Solidification rate in rapid conduction cooling , 1975 .