Control Design of a Dynamic Voltage Restorer for Wind-Driven Induction Generators during a Low Voltage Fault at Grid Bus

Abstract To reduce the parallel transient and resume the power balance immediately after fault clearing, many countries have included the low voltage ride through (LVRT) requirements in the grid codes for grid-connected wind turbines (WTs). Although the removal of the WT from the power grid in the conventional approach is beneficial to alleviate severe mechanical stress incurred by the low voltage fault, remaining the WT to be connected to the grid during the low voltage fault becomes obligate to reduce the risk of voltage collapse for the power system associated with the ever-increasing WT installation. This article presents a control strategy to which the LVRT capability enhancement of a wind-driven squirrel cage induction generator (IG) by the use of a dynamic voltage restorer (DVR). The DVR, with the flexibility of changing output voltage polarity in series with the power source, can sustain the excitation of IG subjected to the low voltage fault and the random change in load and wind speed. A DC voltage regulator is employed to support the DC-link voltage of the DVR for generating appropriate AC voltage level required for the IG. The AC output voltage of the DVR is controlled by an AC voltage regulator according to the IG terminal voltage deviation from the desired value. To achieve voltage and current decoupling control between distinct coordinate axes in the stationary reference frame, a proportional-resonant (PR) controller is adopted. The DVR output voltage can be instantaneously tracked by the PR controller according to the sinusoidal command comes from the DC and AC regulators. To fully utilize the compensation capacity for the DVR, the dynamic estimation of grid voltage lower limit for recasting the AC voltage command (ACC) of the DVR in response to the low voltage fault is proposed to prevent DVR from malfunction due to controller saturation. The experimental results confirm the effectiveness of the proposed strategy.

[1]  N. Mohan,et al.  A Novel Scheme to Connect Wind Turbines to the Power Grid , 2009, IEEE Transactions on Energy Conversion.

[2]  Kit Po Wong,et al.  Advanced Control Strategy of DFIG Wind Turbines for Power System Fault Ride Through , 2012, IEEE Transactions on Power Systems.

[3]  F. Blaabjerg,et al.  Optimized Control Strategy for a Medium-Voltage DVR—Theoretical Investigations and Experimental Results , 2008, IEEE Transactions on Power Electronics.

[4]  Mostafa I. Marei,et al.  A Coordinated Voltage and Frequency Control of Inverter Based Distributed Generation and Distributed Energy Storage System for Autonomous Microgrids , 2013 .

[5]  Woei-Luen Chen,et al.  STATCOM Controls for a Self-Excited Induction Generator Feeding Random Loads , 2008, IEEE Transactions on Power Delivery.

[6]  Heng Nian,et al.  An improved control strategy for DFIG system and dynamic voltage restorer under grid voltage dip , 2012, 2012 IEEE International Symposium on Industrial Electronics.

[7]  Mohamed Abdelrahman,et al.  Low-voltage Ride-through Capability Characterization of Wind Farms , 2012 .

[8]  S.M. Muyeen,et al.  A Variable Speed Wind Turbine Control Strategy to Meet Wind Farm Grid Code Requirements , 2010, IEEE Transactions on Power Systems.

[9]  Woei-Luen Chen,et al.  Design of a Mode Decoupling STATCOM for Voltage Control of Wind-Driven Induction Generator Systems , 2010, IEEE Transactions on Power Delivery.

[10]  Frede Blaabjerg,et al.  A Robust Control Scheme for Medium-Voltage-Level DVR Implementation , 2007, IEEE Transactions on Industrial Electronics.

[11]  Po-Tai Cheng,et al.  Design of a State-Feedback Controller for Series Voltage-Sag Compensators , 2009 .

[12]  Shoji Fukuda,et al.  A novel current-tracking method for active filters based on a sinusoidal internal model [for PWM inv , 2001 .

[13]  Junji Tamura,et al.  Low voltage ride through capability enhancement of wind turbine generator system during network disturbance , 2009 .

[14]  F. Blaabjerg,et al.  Investigation and Improvement of Transient Response of DVR at Medium Voltage Level , 2007, IEEE Transactions on Industry Applications.

[15]  Jon Are Suul,et al.  Low Voltage Ride Through of Wind Farms With Cage Generators: STATCOM Versus SVC , 2008, IEEE Transactions on Power Electronics.

[16]  Fumin Zhang,et al.  Study of Application of Dynamic Voltage Restorer on Low Voltage Ride-Through Capability of Doubly Fed Induction Generator , 2012, 2012 Asia-Pacific Power and Energy Engineering Conference.

[17]  K. Methaprayoon,et al.  Reactive compensation techniques to improve the ride-through capability of wind turbine during disturbance , 2005, IEEE Transactions on Industry Applications.

[18]  Chien-Hung Liu,et al.  Design of a Self-Tuning PI Controller for a STATCOM Using Particle Swarm Optimization , 2010, IEEE Transactions on Industrial Electronics.

[19]  Po-Tai Cheng,et al.  Design of a State-Feedback Controller for Series Voltage-Sag Compensators , 2009, IEEE Transactions on Industry Applications.

[20]  Nikolaos Athanasiadis,et al.  Power Quality Solutions for Voltage Sags Using Dynamic Voltage Restorers , 2003 .

[21]  S. Fukuda,et al.  A novel current tracking method for active filters based on a sinusoidal internal model , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[22]  S. R. Naidu,et al.  Dynamic voltage restorer based on a four-leg voltage source converter , 2009 .

[23]  Jizhong Zhu,et al.  Analysis of Voltage Stability in a Practical Power System with Wind Power , 2010 .