Optimization of bagged denim fabric behaviors using the genetic algorithms and the ant colony optimization methods

Purpose – The purpose of this paper is to optimize the frictional input parameters related to the yarn and woven fabric samples. Indeed, using metaheuristic techniques for optimization, it helps to attempt the best quality appearance of garment, by analysing their effects and relationships with the bagging behaviour of tested fabrics before and after bagging test. Using metaheuristic techniques allows us to select widely the minimal residual bagging properties and the optimized inputs to adjust them for this goal. Design/methodology/approach – The metaheuristic methods were applied and discussed. Hence, the genetic algorithms (GA) and ant colony optimization (ACO) technique results are compared to select the best residual bagging behaviour and their correspondent parameters. The statistical analysis steps were implemented using Taguchi experimental design thanks to Minitab 14 software. The modelling methodology analysed in this paper deals with the linear regression method application and analysis to prep...

[1]  Boubaker Jaouachi.  Evaluation of the Residual Bagging Height using the Regression Technique and Fuzzy Theory , 2013 .

[2]  Chung-Feng Jeffrey Kuo,et al.  A study of processing parameters in open-end spinning process for organic cotton (Ne 24) , 2012 .

[3]  M. L. Realff,et al.  Objective and Subjective Analysis of Knitted Fabric Bagging , 2002 .

[4]  Hossein Hasani,et al.  Analyzing the Effect of Fiber, Yarn and Fabric Variables on Bagging Behavior of Single Jersey Weft Knitted Fabrics , 2013 .

[5]  Masako Niwa,et al.  OBJECTIVE MEASUREMENT OF FABRIC MECHANICAL PROPERTY AND QUALITY:: ITS APPLICATION TO TEXTILE AND CLOTHING MANUFACTURING , 1991 .

[6]  F. Glover,et al.  Handbook of Metaheuristics , 2019, International Series in Operations Research & Management Science.

[7]  B Jaouachi,et al.  Predicting residual bagging bend height of knitted fabric using fuzzy modelling and neural networks , 2010 .

[8]  L. Boullart,et al.  Optimizing the Fiber-to-Yarn Production Process with a Combined Neural Network/Genetic Algorithm Approach , 1997 .

[9]  Menghe Miao,et al.  Fabric-bagging: Stress Distribution in Isotropic and Anisotropic Fabrics , 2000 .

[10]  Boubaker Jaouachi,et al.  Evaluation of residual bagging volume using 3D image analysis technique , 2015 .

[11]  Suet Yi Leung,et al.  A Simulation-Based Replenishment Model for the Textile Industry , 2009 .

[12]  El-Ghazali Talbi,et al.  Metaheuristics - From Design to Implementation , 2009 .

[13]  Jeng-Jong Lin.  A Genetic Algorithm-based Solution Search to Fuzzy Logical Inference for Breakdown Causes in Fabric Inspection , 2009 .

[14]  Hiroko Yokura,et al.  Prediction of Fabric Bagging from Mechanical Properties , 1986 .

[15]  Wing-Keung Wong,et al.  An intelligent model for detecting and classifying color-textured fabric defects using genetic algorithms and the Elman neural network , 2011 .

[16]  R. Postle,et al.  FABRIC MECHANICAL AND PHYSICAL PROPERTIES: PART 4: THE FITTING OF WOVEN FABRICS TO A THREE‐DIMENSIONAL SURFACE , 1990 .

[17]  Kwok Wing Yeung,et al.  Fabric Bagging , 1999 .

[18]  Saeed Shaikhzadeh Najar,et al.  The effect of fabric design and weft density on bagging behavior of cotton woven fabrics , 2010 .

[19]  Kwok Wing Yeung,et al.  Fabric Bagging , 1999 .

[20]  Christian Blum,et al.  Metaheuristics in combinatorial optimization: Overview and conceptual comparison , 2003, CSUR.

[21]  Hossein Hasani,et al.  Regression Model for the Bagging Fatigue of Knitted Fabrics Produced from Viscose/Polyester Blended Rotor Yarns , 2012 .

[22]  Hossein Hasani,et al.  Bagging Behavior of Different Fabric Structures Knitted from Blended Yarns using Image Processing , 2012 .

[23]  J. Amirbayat,et al.  An improved analysis of bagging of textile fabrics. Part II: experimental work , 2006 .

[24]  Ian C. Parmee,et al.  The Ant Colony Metaphor for Searching Continuous Design Spaces , 1995, Evolutionary Computing, AISB Workshop.

[25]  Jeng-Jong Lin,et al.  A Genetic Algorithm for Searching Weaving Parameters for Woven Fabrics , 2003 .

[26]  José Luis López-Bonilla,et al.  Optimization Method based on Genetic Algorithms , 2005 .

[27]  Kwok Wing Yeung,et al.  Relative Contributions of Elasticity and Viscoelasticity of Fibres and Inter-fibre Friction in Bagging of Woven Wool Fabrics , 2000 .

[28]  Marco Dorigo,et al.  Ant system: optimization by a colony of cooperating agents , 1996, IEEE Trans. Syst. Man Cybern. Part B.

[29]  Chung-Feng Jeffrey Kuo,et al.  Integrating a Genetic Algorithm and a Self-organizing Map Network for an Automatically Separating Color Printed Fabric System , 2009 .

[30]  Marco Dorigo,et al.  Distributed Optimization by Ant Colonies , 1992 .

[31]  D. Pavlinic,et al.  Micromechanical Tensile Model of Woven Fabric and Parameter Optimization for Fit with KES Data , 2010 .

[32]  Christian Blum,et al.  Ant colony optimization: Introduction and recent trends , 2005 .

[33]  J. Amirbayat.  An improved analysis of bagging of textile fabrics. Part I: theoretical , 2006 .

[34]  Saeed Shaikhzadeh Najar,et al.  Contributions of in‐plane fabric tensile properties in woven fabric bagging behaviour using a new developed test method , 2004 .

[35]  Marco Dorigo,et al.  Optimization, Learning and Natural Algorithms , 1992 .

[36]  Luca Maria Gambardella,et al.  A survey on metaheuristics for stochastic combinatorial optimization , 2009, Natural Computing.

[37]  Kwok Wing Yeung,et al.  Mathematical Simulation of Fabric Bagging , 2000 .

[38]  Claudio B. Cunha,et al.  New simple and efficient heuristics for the uncapacitated single allocation hub location problem , 2009, Comput. Oper. Res..

[39]  B. Jaouachi,et al.  Evaluation of Spliced Open-end Yarn Performances Using Fuzzy Method , 2012 .

[40]  Jeng-Jong Lin,et al.  Pattern Recognition of Fabric Defects Using Case-Based Reasoning , 2010 .

[41]  Boubaker Jaouachi.  Study of knitting factors contribution on residual bagged fabric behaviour , 2013 .