Control of the morphology of nanostructured particles prepared by the spray drying of a nanoparticle sol.

The control of the morphology of nanostructured particles prepared by the spray drying of nanoparticle sol was investigated experimentally and the results are qualitatively explained based on available theory. A theoretical analysis indicates that the structural stability of the droplet and the hydrodynamic effects during the drying process play important roles in controlling the morphology of the resulting particles. The size of the sol in the droplet, droplet size, viscosity of droplet, drying temperature, gas flow rate, and addition of surfactant are all crucial parameters that affect the morphology of particles. Experimentally, nanostructured silica particles were prepared from a nanosize silica sol under various preparation conditions. Doughnut-shaped particles can be produced when the droplet size is large, in conjunction with high temperature, high gas flow rate and in the presence of an added surfactant. Appropriate choice of the spray drying method permits control of the particle size and shape, ranging from spheres to ellipsoids as well as doughnut-shaped particles by varying the preparation conditions. The results open a new route to controlling the formation of a wide variety of nanostructured particles.

[1]  P. Concus,et al.  Variational Methods for Free Surface Interfaces , 1987 .

[2]  Lord Rayleigh,et al.  LIX. On convection currents in a horizontal layer of fluid, when the higher temperature is on the under side , 1916 .

[3]  J. Pearson,et al.  On convection cells induced by surface tension , 1958, Journal of Fluid Mechanics.

[4]  K. Okuyama,et al.  Functional Nanostructured Silica Powders Derived from Colloidal Suspensions by Sol Spraying , 2001 .

[5]  Douglas M. Smith,et al.  Agglomeration during the Drying of Fine Silica Powders, Part II: The Role of Particle Solubility , 2005 .

[6]  D. Coombe,et al.  Interfacial instabilities: the linde instability , 1990 .

[7]  Egon Matijević,et al.  Surface and Colloid Science , 1971 .

[8]  F. Iskandar,et al.  In Situ Production of Spherical Silica Particles Containing Self-Organized Mesopores , 2001 .

[9]  John S. Rowlinson,et al.  Molecular Theory of Capillarity , 1983 .

[10]  L. E. Scriven,et al.  Pendular rings between solids: meniscus properties and capillary force , 1975, Journal of Fluid Mechanics.

[11]  Daniel D. Joseph,et al.  Stability of fluid motions , 1976 .

[12]  Viola Vogel,et al.  Light-Controlled Molecular Shuttles Made from Motor Proteins Carrying Cargo on Engineered Surfaces , 2001 .

[13]  Kaler,et al.  A class of microstructured particles through colloidal crystallization , 2000, Science.

[14]  Keith Masters,et al.  Spray drying handbook , 1979 .

[15]  V. N. Paunov,et al.  Size-dependent lens angles for small oil lenses on water , 1999 .