Investigation of heat transfer and pressure drop of a counter flow corrugated plate heat exchanger using MWCNT based nanofluids

Abstract The influence of different functional covalent groups on the thermophysical properties of carbon nanotube-base fluid was first investigated experimentally. To shed more light on this issue, cysteine (Cys) and silver (Ag) were covalently attached to the surface of the multi-walled carbon nanotubes (MWCNT). Functionality and morphology were studied by the aid of characterization instruments to confirm surface functionalization, as well. To calculate the thermal properties, different water-based nanofluids such as Gum Arabic-treated multi-walled carbon nanotubes (MWCNT-GA), functionalized MWCNT with cysteine (FMWCNT-Cys) and silver (FMWCNT-Ag) were employed as coolants to investigate the convection heat transfer coefficient, Nusselt number, friction loss, pressure drop and pumping power in a counter flow corrugated plate heat exchanger. Calculations were performed for Reynolds numbers ranging from 2500 to 10,000 (turbulent flow) and nanoparticle weight percentages of 0.0% to 1.0% using a FORTRAN code. Nanofluid properties were also measured through experimentation. It was found that increasing Reynolds number, Peclet number or fraction of nanomaterial would improve the heat transfer characteristics of the nanofluid. However, for a specific material, augmentation of Reynolds number or nanomaterial fraction would cause the required pumping power to rise but this penalty was relatively small. In all the investigated cases, heat transfer rate and power consumption were found to be less for water compared to nanofluids. Besides, heat removal in nanofluids was discovered to be higher than that of water for a specific pumping power. Therefore, performance of the plate heat exchanger can be enhanced by choosing MWCNT/water as the working fluid.

[1]  Arash Karimipour,et al.  Simulation of copper-water nanofluid in a microchannel in slip flow regime using the lattice Boltzmann method , 2015 .

[2]  Luqi Liu,et al.  Rubbery and glassy epoxy resins reinforced with carbon nanotubes , 2005 .

[3]  K. Anoop,et al.  Thermal evaluation of nanofluids in heat exchangers , 2013 .

[4]  Rahman Saidur,et al.  Nanofluid As a Coolant for Electronic Devices: Cooling of Electronic Devices , 2012 .

[5]  Stephen U. S. Choi.  Enhancing thermal conductivity of fluids with nano-particles , 1995 .

[6]  Arash Karimipour,et al.  Mixed convection of copper-water nanofluid in a shallow inclined lid driven cavity using the lattice Boltzmann method , 2014 .

[7]  Sarit K. Das,et al.  Dynamics of plate heat exchangers subject to flow variations , 2007 .

[8]  M. Rosen,et al.  Effect of specific surface area on convective heat transfer of graphene nanoplatelet aqueous nanofluids , 2015 .

[9]  Gerosa Giacomo,et al.  Measurements of Soil Carbon Dioxide Emissions from Two Maize Agroecosystems at Harvest under Different Tillage Conditions , 2014, TheScientificWorldJournal.

[10]  Min-Sheng Liu,et al.  Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system , 2011, Nanoscale research letters.

[11]  M. Talaie,et al.  NUMERICAL AND EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER OF ZnO/WATER NANOFLUID IN THE CONCENTRIC TUBE AND PLATE HEAT EXCHANGERS , 2011 .

[12]  Davood Domiri Ganji,et al.  Fully developed forced convection of alumina/water nanofluid inside microchannels with asymmetric heating , 2015 .

[13]  Angel Huminic,et al.  Application of nanofluids in heat exchangers: A review , 2012 .

[14]  Emad Sadeghinezhad,et al.  Numerical simulation of laminar to turbulent nanofluid flow and heat transfer over a backward-facing step , 2014, Appl. Math. Comput..

[15]  Goodarz Ahmadi,et al.  Investigation of nanofluid mixed convection in a shallow cavity using a two-phase mixture model , 2014 .

[16]  Davood Domiri Ganji,et al.  MHD mixed convection in a vertical annulus filled with Al2O3–water nanofluid considering nanoparticle migration , 2015 .

[17]  Nasrudin Abd Rahim,et al.  Performance Investigation of a Plate Heat Exchanger Using Nanofluid with Different Chevron Angle , 2013 .

[18]  Y. Xuan,et al.  Investigation on Convective Heat Transfer and Flow Features of Nanofluids , 2003 .

[19]  C. T. Nguyen,et al.  Experimental Investigation of Nanofluid Heat Transfer in a Plate Heat Exchanger , 2012 .

[20]  Davood Domiri Ganji,et al.  Effects of nanoparticle migration on force convection of alumina/water nanofluid in a cooled parallel-plate channel , 2014 .

[21]  C. G. Li,et al.  Heat transfer and pressure drop characteristics of nanofluids in a plate heat exchanger. , 2011, Journal of nanoscience and nanotechnology.

[22]  Saeed Zeinali Heris,et al.  Highly Dispersed Multiwalled Carbon Nanotubes Decorated with Ag Nanoparticles in Water and Experimental Investigation of the Thermophysical Properties , 2012 .

[23]  M. Khoshvaght-Aliabadi,et al.  Wavy Channel and Different Nanofluids Effects on Performance of Plate-Fin Heat Exchangers , 2014 .

[24]  Jahar Sarkar,et al.  Heat transfer and pressure drop characteristics of CeO2/water nanofluid in plate heat exchanger , 2013 .

[25]  O. Mahian,et al.  Investigation of Micro- and Nanosized Particle Erosion in a 90° Pipe Bend Using a Two-Phase Discrete Phase Model , 2014, TheScientificWorldJournal.

[26]  S. Paras,et al.  Effect of nanofluids on the performance of a miniature plate heat exchanger with modulated surface , 2009 .

[27]  Arif Hepbasli,et al.  Heat transfer performance and exergy analyses of a corrugated plate heat exchanger using metal oxide nanofluids , 2014 .

[28]  Somchai Wongwises,et al.  A review of entropy generation in nanofluid flow , 2013 .

[29]  Noreen Sher Akbar.  Entropy Generation Analysis for a CNT Suspension Nanofluid in Plumb Ducts with Peristalsis , 2015, Entropy.

[30]  Saeed Zeinali Heris,et al.  One-pot, efficient functionalization of multi-walled carbon nanotubes with diamines by microwave method , 2011 .

[31]  A. Badarudin,et al.  Investigation of Heat Transfer Enhancement in a Forward-Facing Contracting Channel Using FMWCNT Nanofluids , 2014 .

[32]  Jorge Andrey Wilhelms Gut,et al.  Thermal model validation of plate heat exchangers with generalized configurations , 2004 .

[33]  Ravikanth S. Vajjha,et al.  Experimental and numerical investigations of nanofluids performance in a compact minichannel plate heat exchanger , 2014 .

[34]  Mehdi Shanbedi,et al.  Enhanced antibacterial activity of amino acids-functionalized multi walled carbon nanotubes by a simple method. , 2012, Colloids and surfaces. B, Biointerfaces.

[35]  Mehdi Shanbedi,et al.  Influence of different amino acid groups on the free radical scavenging capability of multi walled carbon nanotubes. , 2013, Journal of biomedical materials research. Part A.

[36]  A. E. Kabeel,et al.  The effect of using nano-particles on corrugated plate heat exchanger performance , 2013 .

[37]  Yingjie Zhu,et al.  Monodisperse α-Fe2O3 Mesoporous Microspheres: One-Step NaCl-Assisted Microwave-Solvothermal Preparation, Size Control and Photocatalytic Property , 2010, Nanoscale research letters.

[38]  V. K. Nema,et al.  Experimental analysis of heat transfer and friction factor of nanofluid as a coolant in a corrugated plate heat exchanger , 2012 .