Analytical applications of MIPs in diagnostic assays: future perspectives
暂无分享,去创建一个
[1] K Mosbach,et al. Plastic antibodies: developments and applications. , 1998, Trends in biotechnology.
[2] F. Davis,et al. Cubic molecularly imprinted polymer nanoparticles with a fluorescent core. , 2012, Angewandte Chemie.
[3] Dongyang Zhao,et al. DEVELOPMENT OF A BIOMIMETIC ENZYME-LINKED IMMUNOSORBENT ASSAY METHOD BASED ON A HYDROPHILIC MOLECULARLY IMPRINTED POLYMER FILM FOR DETERMINATION OF OLAQUINDOX IN CHICK FEED SAMPLES , 2013, Journal of immunoassay & immunochemistry.
[4] Isao Karube,et al. Optical Detection System for Triazine Based on Molecularly-Imprinted Polymers , 1997 .
[5] Zilun Chen,et al. Imprinting of protein over silica nanoparticles via surface graft copolymerization using low monomer concentration. , 2010, Biosensors & bioelectronics.
[6] Barbara Wandelt,et al. Fluorescent Functional Recognition Sites through Molecular Imprinting. A Polymer-Based Fluorescent Chemosensor for Aqueous cAMP. , 1998 .
[7] Xiaodong Bi,et al. Facile preparation of glycoprotein-imprinted 96-well microplates for enzyme-linked immunosorbent assay by boronate affinity-based oriented surface imprinting. , 2014, Analytical chemistry.
[8] R. Suedee,et al. Use of molecularly imprinted polymers from a mixture of tetracycline and its degradation products to produce affinity membranes for the removal of tetracycline from water. , 2004, Journal of chromatography. B, Analytical technologies in the biomedical and life sciences.
[9] I. Chianella,et al. Direct replacement of antibodies with molecularly imprinted polymer nanoparticles in ELISA--development of a novel assay for vancomycin. , 2013, Analytical chemistry.
[10] Sushma Pardeshi,et al. Molecularly imprinted microspheres and nanoparticles prepared using precipitation polymerisation method for selective extraction of gallic acid from Emblica officinalis. , 2014, Food chemistry.
[11] Peter A. Lieberzeit,et al. Molecularly imprinted polymer nanoparticles in chemical sensing – Synthesis, characterisation and application , 2015 .
[12] Yueqi Liu,et al. Monodispersed, molecularly imprinted polymers for cinchonidine by precipitation polymerization. , 2010, Talanta.
[13] Marloes Peeters,et al. Thermal detection of histamine with a graphene oxide based molecularly imprinted polymer platform prepared by reversible addition-fragmentation chain transfer polymerization , 2014 .
[14] Yanlin Song,et al. Hydrophilic-Hydrophobic Patterned Molecularly Imprinted Photonic Crystal Sensors for High-Sensitive Colorimetric Detection of Tetracycline. , 2015, Small.
[15] Mei-Hwa Lee,et al. The complete replacement of antibodies by protein-imprinted poly(ethylene-co-vinyl alcohol) in sandwich fluoroimmunoassays , 2013, Microchimica Acta.
[16] X. Dong,et al. Synthesis of tetracycline-imprinted polymer microspheres by reversible addition-fragmentation chain-transfer precipitation polymerization using polyethylene glycol as a coporogen. , 2014, Journal of separation science.
[17] H. Lee,et al. Surface-Imprinted, Thermosensitive, Core-Shell Nanosphere for Molecular Recognition , 2006 .
[18] B. Danielsson,et al. Chemiluminescence imaging ELISA using an imprinted polymer as the recognition element instead of an antibody. , 2001, Analytical chemistry.
[19] D. Estenoz,et al. Molecularly imprinted hydrogels from colloidal crystals for the detection of progesterone , 2015 .
[20] Yuepu Pu,et al. Molecular imprinted photonic crystal hydrogels for the rapid and label-free detection of imidacloprid. , 2013, Food chemistry.
[21] W. Bai,et al. Macromolecular amplification of binding response in superaptamer hydrogels. , 2013, Journal of the American Chemical Society.
[22] S. Yao,et al. Synthesis, characterization and evaluation of uniformly sized core–shell imprinted microspheres for the separation trans-resveratrol from giant knotweed , 2009 .
[23] J. Haginaka,et al. Uniform-sized molecularly imprinted polymer for (S)-naproxen selectively modified with hydrophilic external layer. , 1999, Journal of chromatography. A.
[24] I. Karube,et al. Synthesis and binding properties of a noncovalent molecularly imprinted testosterone‐specific polymer , 1998 .
[25] Henrik Kempe,et al. Development and evaluation of spherical molecularly imprinted polymer beads. , 2006, Analytical chemistry.
[26] I. Nicholls,et al. Molecular imprinting science and technology: a survey of the literature for the years 2004–2011 , 2014, Journal of molecular recognition : JMR.
[27] Guillermo Orellana,et al. Molecularly imprinted polymers as antibody mimics in automated on-line fluorescent competitive assays. , 2007, Analytical chemistry.
[28] G. Shi,et al. A water-soluble cationic oligopyrene derivative : Spectroscopic studies and sensing applications , 2009 .
[29] Isao Karube,et al. Testosterone Receptor Binding Mimic Constructed Using Molecular Imprinting , 1997 .
[30] Nathalie Lavignac,et al. Current status of molecularly imprinted polymers as alternatives to antibodies in sorbent assays , 2004 .
[31] L. Andersson,et al. Molecular imprinting for drug bioanalysis. A review on the application of imprinted polymers to solid-phase extraction and binding assay. , 2000, Journal of chromatography. B, Biomedical sciences and applications.
[32] K Mosbach,et al. Assay system for the herbicide 2,4-dichlorophenoxyacetic Acid using a molecularly imprinted polymer as an artificial recognition element. , 1998, Analytical chemistry.
[33] Klaus Mosbach,et al. Drug assay using antibody mimics made by molecular imprinting , 1993, Nature.
[34] K Mosbach,et al. Mimics of the binding sites of opioid receptors obtained by molecular imprinting of enkephalin and morphine. , 1995, Proceedings of the National Academy of Sciences of the United States of America.
[35] K. Landfester,et al. Molecularly imprinted polymer nanospheres as synthetic affinity receptors obtained by miniemulsion polymerisation , 2002 .
[36] C. van Nostrum,et al. Challenges for the effective molecular imprinting of proteins. , 2011, Biomaterials.
[37] M. Jahanshahi,et al. Synthesis and evaluation of uniformly sized nalidixic acid–imprinted nanospheres based on precipitation polymerization method for analytical and biomedical applications , 2012, Journal of molecular recognition : JMR.
[38] M. Whitcombe,et al. Molecularly imprinted nanoparticles prepared by core‐shell emulsion polymerization , 2000 .
[39] Mingfei Pan,et al. Development of a Biomimetic Enzyme‐linked Immunosorbent Assay Method for the Determination of Methimazole in Urine Sample , 2011 .
[40] B. Sellergren. Imprinted dispersion polymers: A new class of easily accessible affinity stationary phases , 1994 .
[41] R. Suedee,et al. Recognition Properties and Competitive Assays of a Dual Dopamine/Serotonin Selective Molecularly Imprinted Polymer , 2008, International journal of molecular sciences.
[42] Koji Sode,et al. Uniform molecularly imprinted microspheres and nanoparticles prepared by precipitation polymerization: the control of particle size suitable for different analytical applications. , 2007, Analytica chimica acta.
[43] K. Mosbach,et al. The Use of Immobilized Templates-A New Approach in Molecular Imprinting. , 2000, Angewandte Chemie.
[44] Feng Liu,et al. Detection of organophosphorus compounds using a molecularly imprinted photonic crystal. , 2012, Biosensors & bioelectronics.
[45] Zhongpin Zhang,et al. Core-shell nanostructured molecular imprinting fluorescent chemosensor for selective detection of atrazine herbicide. , 2011, The Analyst.
[46] Yun-tang Wu,et al. Molecular imprinted opal closest-packing photonic crystals for the detection of trace 17β-estradiol in aqueous solution. , 2015, Talanta.
[47] M. Whitcombe,et al. Synthetic strategies for the generation of molecularly imprinted organic polymers. , 2005, Advanced drug delivery reviews.
[48] G. Wulff. Molecular Imprinting in Cross‐Linked Materials with the Aid of Molecular Templates— A Way towards Artificial Antibodies , 1995 .
[49] Sergey A. Piletsky,et al. Size matters: Challenges in imprinting macromolecules , 2014 .
[50] L. Ye,et al. New configurations and applications of molecularly imprinted polymers. , 2000, Journal of chromatography. A.
[51] A. Mayes,et al. Noncovalent imprinting in the shell of core-shell nanoparticles. , 2004, Langmuir : the ACS journal of surfaces and colloids.
[52] L. Ye,et al. Molecularly imprinted monodisperse microspheres for competitive radioassay , 1999 .
[53] Ning Gan,et al. A portable and antibody-free sandwich assay for determination of chloramphenicol in food based on a personal glucose meter , 2015, Analytical and Bioanalytical Chemistry.
[54] Karsten Haupt,et al. Imprinted polymers-tailor-made mimics of antibodies and receptors. , 2003, Chemical communications.
[55] David R Kryscio,et al. Protein conformational studies for macromolecularly imprinted polymers. , 2012, Macromolecular bioscience.
[56] S. Gangopadhyay,et al. Comparison of molecular imprinted particles prepared using precipitation polymerization in water and chloroform for fluorescent detection of nitroaromatics. , 2011, Analytica chimica acta.
[57] Yan Li,et al. Ultrasensitive Specific Stimulant Assay Based on Molecularly Imprinted Photonic Hydrogels , 2008 .
[58] L. Ye,et al. Molecularly imprinted polymer beads prepared by pickering emulsion polymerization for steroid recognition , 2014 .
[59] M. Bowyer,et al. N-2-Propenyl-(5-dimethylamino)-1-naphthalene Sulfonamide, a Novel Fluorescent Monomer for the Molecularly Imprinted Polymer-Based Detection of 2,4-Dinitrotoluene in the Gas Phase , 2012 .
[60] N. Funaya,et al. Monodisperse, molecularly imprinted polymers for creatinine by modified precipitation polymerization and their applications to creatinine assays for human serum and urine. , 2013, Journal of pharmaceutical and biomedical analysis.
[61] John O'Mahony,et al. Molecular imprinting science and technology: a survey of the literature for the years up to and including 2003 , 2006, Journal of molecular recognition : JMR.
[62] A. Molinelli,et al. Molecularly imprinted micro and nanospheres for the selective recognition of 17beta-estradiol. , 2006, Biosensors & bioelectronics.
[63] B. Danielsson,et al. An enzyme-linked molecularly imprinted sorbent assay , 2000 .
[64] R. Rosenfeld. Nature , 2009, Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery.
[65] Andrew G. Mayes,et al. COMPARATIVE STUDY OF IMPRINTED POLYMER PARTICLES PREPARED BY DIFFERENT POLYMERISATION METHODS , 2004 .
[66] Karsten Haupt,et al. Molecularly imprinted polymers as antibody and receptor mimics for assays, sensors and drug discovery , 2004, Analytical and bioanalytical chemistry.
[67] Yingxin Ma,et al. Composite QDs@MIP nanospheres for specific recognition and direct fluorescent quantification of pesticides in aqueous media. , 2012, Analytical chemistry.
[68] Yue Ma,et al. Study on a biomimetic enzyme-linked immunosorbent assay method for rapid determination of trace acrylamide in French fries and cracker samples. , 2014, Journal of the science of food and agriculture.
[69] A. Turner,et al. Molecularly imprinted sorbent assays: recent developments and applications. , 2009, Chemistry.
[70] Hanne Diliën,et al. Heat-transfer-method-based cell culture quality assay through cell detection by surface imprinted polymers. , 2015, Langmuir : the ACS journal of surfaces and colloids.
[71] T. Vandenryt,et al. Improving the sensitivity of the heat‐transfer method (HTM) for cancer cell detection with optimized sensor chips , 2015 .
[72] Mosbach,et al. Molecularly imprinted polymers for bioanalysis: chromatography, binding assays and biomimetic sensors. , 1996, Current opinion in biotechnology.
[73] Ying Zhang,et al. One-pot synthesis of surface-functionalized molecularly imprinted polymer microspheres by iniferter-induced “living” radical precipitation polymerization , 2010 .
[74] Guozhen Fang,et al. An enzyme-linked immunosorbent assay for the determination of tribenuron-methyl in water and soil using a molecularly imprinted film as an artificial antibody , 2013 .
[75] L. Ye,et al. Preparation of protein imprinted polymer beads by Pickering emulsion polymerization. , 2015, Journal of materials chemistry. B.
[76] Xiwen He,et al. The synthesis of magnetic lysozyme-imprinted polymers by means of distillation-precipitation polymerization for selective protein enrichment. , 2014, Chemistry, an Asian journal.
[77] 宁北芳,et al. 疟原虫var基因转换速率变化导致抗原变异[英]/Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A , 2005 .
[78] Zhixian Gao,et al. Detection of bisphenol A using an opal photonic crystal sensor , 2012 .
[79] Jianping Gao,et al. Molecularly imprinted photonic crystals for the direct label-free distinguishing of L-proline and D-proline. , 2013, Physical chemistry chemical physics : PCCP.
[80] Z. Zhang,et al. Chemiluminescence imaging assay dipyridamole based on molecular imprinted polymer as recognition material , 2008 .
[81] Guillermo Orellana,et al. Molecular engineering of fluorescent penicillins for molecularly imprinted polymer assays. , 2006, Analytical chemistry.
[82] L. Ye,et al. Polymers recognizing biomolecules based on a combination of molecular imprinting and proximity scintillation: a new sensor concept. , 2001, Journal of the American Chemical Society.
[83] L. Ye,et al. Molecular imprinting in Pickering emulsions: a new insight into molecular recognition in water. , 2011, Chemical communications.
[84] F. Zhang,et al. Substitution of antibody with molecularly imprinted 96-well plate in chemiluminescence enzyme immunoassay for the determination of chloramphenicol residues , 2014 .
[85] M. Byrne,et al. Tailored binding and transport parameters of molecularly imprinted films via macromolecular structure: The rational design of recognitive polymers , 2008 .
[86] L. Andersson,et al. Application of imprinted synthetic polymers in binding assay development. , 2000, Methods.
[87] R. Ansell. Molecularly imprinted polymers in pseudoimmunoassay. , 2004, Journal of chromatography. B, Analytical technologies in the biomedical and life sciences.
[88] James Noble,et al. The rational development of molecularly imprinted polymer-based sensors for protein detection. , 2011, Chemical Society reviews.
[89] S. Rimmer,et al. Molecular Recognition of Caffeine by Shell Molecular Imprinted Core–Shell Polymer Particles in Aqueous Media , 2002 .
[90] L. Ye,et al. Molecularly imprinted polymer microspheres prepared by precipitation polymerization using a sacrificial covalent bond , 2006 .
[91] A. Rachkov,et al. Towards molecularly imprinted polymers selective to peptides and proteins. The epitope approach. , 2001, Biochimica et biophysica acta.
[92] K. Haupt,et al. A fluorescence polarisation molecular imprint sorbent assay for 2,4-D: a non-separation pseudo-immunoassay. , 2006, Chemical communications.
[93] Yuan Jin,et al. Narrowly dispersed molecularly imprinted microspheres prepared by a modified precipitation polymerization method. , 2008, Analytica chimica acta.
[94] K. Haupt,et al. Preparation and evaluation of a molecularly imprinted polymer for the selective recognition of testosterone—application to molecularly imprinted sorbent assays , 2011, Journal of molecular recognition : JMR.
[95] Ning Gan,et al. Simultaneous electrochemical immunoassay using graphene-Au grafted recombinant apoferritin-encoded metallic labels as signal tags and dual-template magnetic molecular imprinted polymer as capture probes. , 2015, Biosensors & bioelectronics.
[96] Claudia Sulitzky,et al. An improved grafting technique for producing imprinted thin film composite beads , 2012 .
[97] Zhen Liu,et al. A boronate affinity sandwich assay: an appealing alternative to immunoassays for the determination of glycoproteins. , 2014, Angewandte Chemie.
[98] Henrik Kempe,et al. Novel Method for the Synthesis of Molecularly Imprinted Polymer Bead Libraries , 2004 .
[99] Karsten Haupt,et al. Direct fluorimetric sensing of UV-excited analytes in biological and environmental samples using molecularly imprinted polymer nanoparticles and fluorescence polarization. , 2012, Biosensors & bioelectronics.
[100] W. De Ceuninck,et al. Heat-transfer-based detection of l-nicotine, histamine, and serotonin using molecularly imprinted polymers as biomimetic receptors , 2013, Analytical and Bioanalytical Chemistry.
[101] Bing Han,et al. Surface-imprinted core-shell nanoparticles for sorbent assays. , 2007, Analytical chemistry.
[102] Knut Rurack,et al. Fluorescent sensory microparticles that "light-up" consisting of a silica core and a molecularly imprinted polymer (MIP) shell. , 2013, Angewandte Chemie.
[103] Guozhen Fang,et al. Development of a biomimetic enzyme-linked immunosorbent assay method for the determination of estrone in environmental water using novel molecularly imprinted films of controlled thickness as artificial antibodies. , 2009, Journal of agricultural and food chemistry.
[104] L. Ye,et al. Insight into molecular imprinting in precipitation polymerization systems using solution NMR and dynamic light scattering , 2011, Journal of molecular recognition : JMR.
[105] G. Cheng,et al. Synthesis and characteristics of tyrosine imprinted beads via suspension polymerization , 2003 .
[106] A. Maître,et al. Inverse opals of molecularly imprinted hydrogels for the detection of bisphenol A and pH sensing. , 2012, Langmuir : the ACS journal of surfaces and colloids.
[107] L. Andersson,et al. Application of molecular imprinting to the development of aqueous buffer and organic solvent based radioligand binding assays for (s)-propranolol. , 1996, Analytical chemistry.
[108] G. Pan,et al. Efficient one-pot synthesis of water-compatible molecularly imprinted polymer microspheres by facile RAFT precipitation polymerization. , 2011, Angewandte Chemie.
[109] Lei Ye,et al. Peptide-imprinted polymer microspheres prepared by precipitation polymerization using a single bi-functional monomer. , 2009, The Analyst.
[110] W. Long,et al. Synthesis, recognition characteristics and properties of l-3-n-butylphthalide molecularly imprinted polymers as sorbent for solid-phase extraction through precipitation polymerization. , 2015, Materials science & engineering. C, Materials for biological applications.
[111] K Mosbach,et al. Molecularly imprinted polymer beads: suspension polymerization using a liquid perfluorocarbon as the dispersing phase. , 1996, Analytical chemistry.
[112] C. Tanford. Macromolecules , 1994, Nature.
[113] M. Daemen,et al. Heat-transfer resistance measurement method (HTM)-based cell detection at trace levels using a progressive enrichment approach with highly selective cell-binding surface imprints. , 2014, Langmuir : the ACS journal of surfaces and colloids.
[114] N. Sugimoto,et al. Molecularly-imprinted polymeric logic gates selective for predetermined chemical input species. , 2006, Chemical communications.
[115] Lu Zhang,et al. Synthesis of metronidazole-imprinted molecularly imprinted polymers by distillation precipitation polymerization and their use as a solid-phase adsorbent and chromatographic filler. , 2015, Journal of separation science.
[116] A. Mayes,et al. A direct comparison of the performance of ground, beaded and silica-grafted MIPs in HPLC and turbulent flow chromatography applications. , 2004, Biosensors & bioelectronics.
[117] L. Andersson,et al. Molecular imprint based radioassay for direct determination of S-propranolol in human plasma , 1997 .
[118] Maria-Magdalena Titirici,et al. Hierarchically Imprinted Stationary Phases: Mesoporous Polymer Beads Containing Surface-Confined Binding Sites for Adenine , 2002 .
[119] Yong Li,et al. Grafting of molecularly imprinted polymers from the surface of silica gel particles via reversible addition-fragmentation chain transfer polymerization: a selective sorbent for theophylline. , 2009, Talanta.
[120] Conformational studies of common protein templates in macromolecularly imprinted polymers , 2012, Biomedical microdevices.
[121] F. Hadizadeh,et al. Preparation and study of tramadol imprinted micro-and nanoparticles by precipitation polymerization: microwave irradiation and conventional heating method. , 2014, International journal of pharmaceutics.
[122] E. Vulfson,et al. Surface imprinting of cholesterol on Submicrometer core-shell emulsion particles , 2001 .
[123] Wei Liu,et al. A molecularly imprinted polymer based a lab-on-paper chemiluminescence device for the detection of dichlorvos. , 2015, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.
[124] A. El'skaya,et al. Molecularly imprinted polymers as artificial steroid receptors , 1998 .
[125] K. Sreenivasan. Molecularly imprinted polyacrylic acid containing multiple recognition sites for steroids , 2001 .
[126] C. V. Van Peteghem,et al. Molecularly Imprinted Polymers as Specific Adsorbents for Zearalenone Produced by Precipitation Polymerization and Applied to Mycotoxin Production , 2011 .
[127] D. Sherrington,et al. Monodisperse, molecularly imprinted polymer microspheres prepared by precipitation polymerization for affinity separation applications. , 2003, Angewandte Chemie.
[128] Zhixiang Xu,et al. Development of a Direct Competitive Biomimetic Enzyme-Linked Immunosorbent Assay Based on a Hydrophilic Molecularly Imprinted Membrane for the Determination of Trichlorfon Residues in Vegetables , 2012, Food Analytical Methods.
[129] Guozhen Fang,et al. Substitution of Antibody with Molecularly Imprinted Film in Enzyme-Linked Immunosorbent Assay for Determination of Trace Ractopamine in Urine and Pork Samples , 2011 .
[130] Sergey A. Piletsky,et al. Solid‐Phase Synthesis of Molecularly Imprinted Polymer Nanoparticles with a Reusable Template–“Plastic Antibodies” , 2013, Advanced functional materials.
[131] Layer‐by‐Layer Grafting of Molecularly Imprinted Polymers via Iniferter Modified Supports , 2002 .