Semi-Solid Processing of Powder Steels in Cryogenically-Cooled Die

By processing steels in the semi-solid state it is possible to achieve unconventional structures even with commonly used steels. This can be demonstrated on X210Cr12 tool steel. After semi-solid state processing, 96% of the microstructure can consist of metastable austenite. In the microstructure, there are polyhedral grains embedded in a ledeburitic network. A combination of semi-solid state processing and rapid solidification is a new method for modifying the microstructure more substantially. In the present experiment, two tool steels, CPM 15V and CPM S30V, were processed by an unconventional method. Since the steels are made by powder metallurgy, their initial structure contains globular carbides in ferritic matrix. Both materials have high levels of carbon and alloying elements, namely vanadium and chromium. The unconventional processing was carried out by mini-thixoforming which enables the use of a small amount of metal. After heating into the semi-solid region, the material was rapidly forced by lateral extrusion into a cavity of a metal die where rapid solidification and rapid cooling took place. Two cooling schedules were employed. In the first case, the die was at room temperature, whereas in the second one it was pre-cooled to-196°C using liquid nitrogen. Since the test sample was cooled from both sides and its thickness was 3 mm, immensely high cooling rates were achieved. The influence of the cooling rate was also noticeable in the microstructures containing high fractions of metastable austenite, martensite and carbides.