CQFB and PBP in Diagnosis of Local Gear Fault

The vibration signal of local gear fault is mainly composed of two components. One is the resonant signal and noise signal and the other one is the transient impulse signal including fault information. The quality factors corresponding to the two components are different. Hence, a method to diagnose local gear fault based on composite quality factor basis and parallel basis pursuit is proposed. First, two different quality factors bases are established using wavelet transform of variable quality factors to obtain the decomposition coefficient. Next, the parallel basis pursuit is adopted for the optimization of the decomposition coefficient. With the derived optimal decomposition coefficient, the resonant components with different quality factors can be reconstructed. By discussing the sparsity of signals treated with different quality factors bases, the suitable composite quality factor basis is selected to perform sparse decomposition on the signal. Besides, the obtained resonant component with low quality factor is subject to demodulation analysis, so as to derive the fault information. The feasibility and validity of the algorithm are shown by the results from simulation signal and practical application of local gear faults.

[1]  Hui Li,et al.  Local Mean Decomposition Based Bearing Fault Detection , 2012 .

[2]  Wenyi Wang,et al.  EARLY DETECTION OF GEAR TOOTH CRACKING USING THE RESONANCE DEMODULATION TECHNIQUE , 2001 .

[3]  Ivan W. Selesnick,et al.  Resonance-based signal decomposition: A new sparsity-enabled signal analysis method , 2011, Signal Process..

[4]  Ivan W. Selesnick,et al.  Overcomplete Discrete Wavelet Transforms With Rational Dilation Factors , 2009, IEEE Transactions on Signal Processing.

[5]  Xu Yong-gang.  Application of resonance demodulation technology in equipment's fault diagnosis , 2007 .

[6]  Anand Parey,et al.  Dynamic modelling of spur gear pair and application of empirical mode decomposition-based statistical analysis for early detection of localized tooth defect , 2006 .

[7]  K. I. Ramachandran,et al.  A comparative study on classification of features by SVM and PSVM extracted using Morlet wavelet for fault diagnosis of spur bevel gear box , 2008, Expert Syst. Appl..

[8]  George E. P. Box,et al.  The Royal Society of London , 2013 .

[9]  Ivan W. Selesnick,et al.  Frequency-Domain Design of Overcomplete Rational-Dilation Wavelet Transforms , 2009, IEEE Transactions on Signal Processing.

[10]  Ivan W. Selesnick,et al.  Wavelet Transform With Tunable Q-Factor , 2011, IEEE Transactions on Signal Processing.

[11]  S. S. Shen,et al.  A confidence limit for the empirical mode decomposition and Hilbert spectral analysis , 2003, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[12]  Y. K. Wen,et al.  Hht-Based Simulation of Uniform Hazard Ground Motions , 2009, Adv. Data Sci. Adapt. Anal..

[13]  Ioannis Antoniadis,et al.  Demodulation of Vibration Signals Generated by Defects in Rolling Element Bearings Using Complex Shifted Morlet Wavelets , 2002 .

[14]  N. Huang,et al.  The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis , 1998, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.