V-band reflection-type phase shifters using micromachined CPW coupler and RF switches

Micromachined reflection-type phase shifters with small size and low loss for V-band communication systems are described. Two- and three-bit reflection type phase shifters were designed, fabricated, and measured. The micromachined air-gap overlay coupler and the direct contact type series switches were employed to implement the phase shift and reduce an insertion loss. The phase shift can be obtained by changing the length of the open-ended stubs using the cascaded MEMS switches. The fabricated two-bit phase shifter has a measured phase shift of 0/spl deg/, 41.5/spl deg/, 84.3/spl deg/, and 128.7/spl deg/ with the consecutive actuation of the series MEMS switches. The actuation voltage of the switches is 35 V and the measured switching ON time is 5.1 /spl mu/s. The average insertion loss of the two-bit phase shifter measured 4.1 dB at 60 GHz and the return losses for all phase shift states are better than 11.7 dB from 50 to 70 GHz. The two-bit phase shifter is small, 1.5 mm /spl times/ 2.1 mm. By cascading the two-bit phase shifter and a 180/spl deg/ phase shifter (one-bit), a three-bit phase shifter is realized, which has a phase shift of 265.5/spl deg/ and an average insertion loss of 4.85 dB at 60 GHz. The size of the three-bit phase shifter is 3.2 mm /spl times/ 2.1 mm.

[1]  R. Mihailovich,et al.  A DC-to-40 GHz four-bit RF MEMS true-time delay network , 2001, IEEE Microwave and Wireless Components Letters.

[2]  J.J. Lee,et al.  A wideband beam switching antenna using RF MEMS switches , 2001, IEEE Antennas and Propagation Society International Symposium. 2001 Digest. Held in conjunction with: USNC/URSI National Radio Science Meeting (Cat. No.01CH37229).

[3]  Gabriel M. Rebeiz,et al.  High-isolation CPW MEMS shunt switches. 1. Modeling , 2000 .

[4]  Youngwoo Kwon,et al.  A compact V-band 2-bit reflection-type MEMS phase shifter , 2002 .

[5]  Tae-Yeoul Yun,et al.  A phased-array antenna using a multi-line phase shifter controlled by a piezoelectric transducer , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[6]  Charles L. Goldsmith,et al.  X-band RF MEMS phase shifters for phased array applications , 1999 .

[7]  K. Suzuki,et al.  A micromachined RF microswitch applicable to phased-array antennas , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[8]  Gabriel M. Rebeiz,et al.  Distributed MEMS true-time delay phase shifters and wide-band switches , 1998 .

[9]  S. Eshelman,et al.  Micromachined low-loss microwave switches , 1999 .

[10]  Yong-Kweon Kim,et al.  Novel Micromachined Coplanar Waveguide Transmission Lines for Application in Millimeter-Wave Circuits , 2000 .

[11]  C. Nguyen,et al.  Design of low actuation voltage RF MEMS switch , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[12]  Gabriel M. Rebeiz,et al.  Low-loss cascadable MEMS distributed X-band phase shifters , 2000, IEEE Microwave and Guided Wave Letters.

[13]  Gabriel M. Rebeiz,et al.  High-isolation CPW MEMS shunt switches. 2. Design , 2000 .

[14]  M. F. Chang,et al.  A Surface Micromachined Miniature Switch For Telecommunications Applications With Signal Frequencies From DC Up To 4 Ghz , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.