Compact Water-Cooled Thermoelectric Generator (TEG) Based on a Portable Gas Stove

A compact water-cooled thermoelectric generator (TEG) based on a portable gas stove was designed and analyzed to supply electricity in off-grid scenarios. The TEG incorporates a newly designed heat collector, eight thermoelectric (TE) modules, and a radiator to ensure its portability (5.9 kg) and sufficiency of electric power (12.9 W). Detailed measurements and discussions on power load feature and TE efficiency are presented. Experiments showed that the power generation capability of the proposed TEG is compromised by its compactness over previous water-cooled TEGs. A theoretical model incorporated with heat leaks from various origins has been developed to illustrate that the designed TEG exerts the potential of every TE module, and to reveal the proportion of various heat fluxes. The predicted electric power, various heat fluxes, and TE efficiency agree well with experimental data. The limitations of TE efficiency and the nonlinearity caused by Joule heat are discussed quantitatively.

[1]  Yousef S.H. Najjar,et al.  Thermoelectric stoves for poor deprived regions – A review , 2017 .

[2]  Aie.  World Energy Outlook 2017 , 2017 .

[3]  Virendra Kumar Vijay,et al.  Design and performance evaluation of thermoelectric generator stove and comparison with traditional, natural and forced draft stoves , 2015 .

[4]  Keith W. Lindler.  Use of multi-stage cascades to improve performance of thermoelectric heat pumps , 1998 .

[5]  R. Taylor,et al.  Finite element analysis and material sensitivity of Peltier thermoelectric cells coolers , 2012 .

[6]  P. Raman,et al.  Development, design and performance analysis of a forced draft clean combustion cookstove powered by a thermo electric generator with multi-utility options , 2014 .

[7]  M. Kanatzidis,et al.  Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals , 2014, Nature.

[8]  Andrea Montecucco,et al.  A Combined Heat and Power System for Solid-fuel Stoves Using Thermoelectric Generators , 2015 .

[9]  Jing Wang,et al.  An optimization study of structural size of parameterized thermoelectric generator module on performance , 2018 .

[10]  L. Tartakovsky,et al.  Fuel reforming in internal combustion engines , 2018, Progress in Energy and Combustion Science.

[11]  Mengjie Zhang,et al.  Theoretical analysis and design optimization of thermoelectric generator , 2017 .

[12]  Nesreen Ghaddar,et al.  Development and testing of a domestic woodstove thermoelectric generator with natural convection cooling , 2005 .

[13]  Taeyoung Kim,et al.  Energy harvesting performance of hexagonal shaped thermoelectric generator for passenger vehicle applications: An experimental approach , 2018 .

[14]  Virendra Kumar Vijay,et al.  Multi-functionality clean biomass cookstove for off-grid areas , 2016 .

[15]  Zhu He,et al.  A three-dimensional model for thermoelectric generator and the influence of Peltier effect on the performance and heat transfer , 2018 .

[16]  Yousef S.H. Najjar,et al.  Evaluation of experimental JUST thermoelectric stove for electricity – Deprived regions , 2017 .

[17]  J. Qin,et al.  Performance assessment of multi-stage thermoelectric generators on hypersonic vehicles at a large temperature difference , 2017 .

[18]  R. Saidur,et al.  Estimation of thermoelectric power generation by recovering waste heat from Biomass fired thermal oil heater , 2015 .

[19]  Zhijia Yang,et al.  A dynamic model for thermoelectric generator applied to vehicle waste heat recovery , 2018 .

[20]  G. Dui,et al.  Revisiting the temperature dependence in material properties and performance of thermoelectric materials , 2017 .

[21]  Yousef S.H. Najjar,et al.  Heat transfer and performance analysis of thermoelectric stoves , 2016 .

[22]  S. M. O'Shaughnessy,et al.  Performance analysis of a prototype small scale electricity-producing biomass cooking stove , 2015 .

[23]  S. C. Kaushik,et al.  Multi-objective and multi-parameter optimization of two-stage thermoelectric generator in electrically series and parallel configurations through NSGA-II , 2015 .

[24]  H. K. Ma,et al.  Waste heat recovery using a thermoelectric power generation system in a biomass gasifier , 2015 .

[25]  Heng Wang,et al.  Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe , 2016, Science.

[26]  Jun Mao,et al.  High thermoelectric performance of α-MgAgSb for power generation , 2018 .

[27]  Gao Min,et al.  Evaluation of thermoelectric modules for power generation , 1998 .

[28]  Ramsey F. Hamade,et al.  Design and testing of a locally made loop-type thermosyphonic heat sink for stove-top thermoelectric generators , 2005 .

[29]  H. J. Li,et al.  Development of stove-powered thermoelectric generators: A review , 2016 .

[30]  Chang Chung Yang,et al.  Modeling and simulation for the design of thermal-concentrated solar thermoelectric generator , 2014 .

[31]  Marcelo G. Molina,et al.  Development of thermoelectric generators for electrification of isolated rural homes , 2010 .

[32]  Gao Min,et al.  Low cost stove-top thermoelectric generator for regions with unreliable electricity supply , 2003 .

[33]  Shixue Wang,et al.  Energy and exergy analysis of thermoelectric generator system with humidified flue gas , 2018 .

[34]  Cheng-Ting Hsu,et al.  An effective Seebeck coefficient obtained by experimental results of a thermoelectric generator module , 2011 .

[35]  Andrea Montecucco,et al.  Combined heat and power system for stoves with thermoelectric generators , 2017 .

[36]  D. Wee.  Uncertainty and sensitivity of the maximum power in thermoelectric generation with temperature-dependent material properties: An analytic polynomial chaos approach , 2018 .

[37]  C Lertsatitthanakorn,et al.  Electrical performance analysis and economic evaluation of combined biomass cook stove thermoelectric (BITE) generator. , 2007, Bioresource technology.

[38]  S. Priya,et al.  Modeling and analysis of the effect of thermal losses on thermoelectric generator performance using effective properties , 2018 .

[39]  M. Kanatzidis,et al.  High-performance bulk thermoelectrics with all-scale hierarchical architectures , 2012, Nature.

[40]  Christophe Goupil,et al.  Comparison of different modeling approaches for thermoelectric elements , 2013 .

[41]  Jean-Pierre Bédécarrats,et al.  Thermoelectric power generation from biomass cook stoves , 2010 .

[42]  Lorenzo Tocci,et al.  Small Scale Organic Rankine Cycle (ORC): A Techno-Economic Review , 2017 .

[43]  Saffa Riffat,et al.  Performance simulation and experimental testing of a novel thermoelectric heat pump system , 2006 .

[44]  Aliakbar Akbarzadeh,et al.  Experimental investigation of combined heat recovery and power generation using a heat pipe assisted thermoelectric generator system , 2016 .

[45]  Guoneng Li,et al.  Experimental study on a stove-powered thermoelectric generator (STEG) with self starting fan cooling , 2018, Renewable Energy.

[46]  M. Rivaletto,et al.  Study of a TE (thermoelectric) generator incorporated in a multifunction wood stove , 2011 .