Effect of Polyethylene Glycol Content and Molar Mass on Injection Molding of Hydroxypropyl Methylcellulose Acetate Succinate-Based Gastroresistant Capsular Devices for Oral Drug Delivery

Capsular devices for oral drug delivery were recently proposed and manufactured by injection molding (IM) as an evolution of traditional reservoir systems comprising a core and a functional coating. IM allowed the fabrication of capsule shells with release-controlling features based on the employed materials and the design characteristics. These features are independent of the drug, with significant savings in development time and costs. In previous work, IM was used to produce enteric-soluble capsules from blends of hydroxypropyl methylcellulose acetate succinate, with polyethylene glycol (PEG) as the plasticizer. In this work, the range of plasticizer concentrations and molar mass was broadened to evaluate in-depth how those parameters affect material processability and capsule performance over time. As expected, increasing the amount of the low molar mass plasticizer decreased the viscosity and modulus of the material. This simplified the molding process and enhanced the mechanical resistance of the shell, as observed during assembly. However, some samples turned out translucent, depending on several factors including storage conditions. This was attributed to plasticizer migration issues. Such results indicate that higher molar mass PEGs, while not significantly impacting on processability, lead to capsular devices with consistent performance in the investigated time lapse.

[1]  F. Baldi,et al.  Assessment of hot‐processability and performance of ethylcellulose‐based materials for injection‐molded prolonged‐release systems: An investigational approach , 2018, International journal of pharmaceutics.

[2]  --Manuscript Draft,et al.  AAPS PharmSciTech Industrial development of a 3D printed nutraceutical delivery platform in the form of a multicompartment HPC capsule , 2018 .

[3]  S. El Achy,et al.  Dual effect biodegradable ciprofloxacin loaded implantable matrices for osteomyelitis: controlled release and osteointegration , 2018, Drug development and industrial pharmacy.

[4]  A. Gazzaniga,et al.  3D printed multi‐compartment capsular devices for two‐pulse oral drug delivery , 2017, Journal of controlled release : official journal of the Controlled Release Society.

[5]  J. Chun,et al.  Development of Maltodextrin-Based Immediate-Release Tablets Using an Integrated Twin-Screw Hot-Melt Extrusion and Injection-Molding Continuous Manufacturing Process. , 2017, Journal of pharmaceutical sciences.

[6]  K. Wagner,et al.  Predicting melt rheology for hot‐melt extrusion by means of a simple Tg‐measurement , 2017, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[7]  V. Vanhoorne,et al.  Thermoplastic polyurethane-based intravaginal rings for prophylaxis and treatment of (recurrent) bacterial vaginosis. , 2017, International journal of pharmaceutics.

[8]  Bin Cheng,et al.  A Strategy for Nonmigrating Highly Plasticized PVC , 2017, Scientific Reports.

[9]  F. Baldi,et al.  Rheological Characterization of Ethylcellulose-Based Melts for Pharmaceutical Applications , 2017, AAPS PharmSciTech.

[10]  P. Caliceti,et al.  In vitro and in vivo evaluation of an oral multiple-unit formulation for colonic delivery of insulin. , 2016, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[11]  T. De Beer,et al.  Hydrophilic thermoplastic polyurethanes for the manufacturing of highly dosed oral sustained release matrices via hot melt extrusion and injection molding. , 2016, International journal of pharmaceutics.

[12]  A. Gazzaniga,et al.  Erodible drug delivery systems for time-controlled release into the gastrointestinal tract , 2016 .

[13]  P. Pandey,et al.  Influence of temperature and relative humidity conditions on the pan coating of hydroxypropyl cellulose molded capsules. , 2016, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[14]  Federico Parietti,et al.  3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs , 2015 .

[15]  A. Gazzaniga,et al.  Evaluation of hot-melt extrusion and injection molding for continuous manufacturing of immediate-release tablets. , 2015, Journal of pharmaceutical sciences.

[16]  A. Gazzaniga,et al.  Enteric-coating of pulsatile-release HPC capsules prepared by injection molding. , 2013, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[17]  J. Soulestin,et al.  Evaluation of rheological properties of non-Newtonian fluids in micro rheology compounder: Experimental procedures for a reliable polymer melt viscosity measurement , 2014 .

[18]  N. Shah,et al.  Stability assessment of hypromellose acetate succinate (HPMCAS) NF for application in hot melt extrusion (HME). , 2014, Carbohydrate polymers.

[19]  A. Gazzaniga,et al.  Injection-molded capsular device for oral pulsatile release: development of a novel mold. , 2013, Journal of pharmaceutical sciences.

[20]  A. Gazzaniga,et al.  Gastroresistant capsular device prepared by injection molding. , 2013, International journal of pharmaceutics.

[21]  Andrea Gazzaniga,et al.  Injection Molding and its application to drug delivery. , 2012, Journal of controlled release : official journal of the Controlled Release Society.

[22]  W. Brostow,et al.  Plasticizer migration from cross‐linked flexible PVC: Effects on tribology and hardness , 2012 .

[23]  Andrea Gazzaniga,et al.  A Novel Injection-Molded Capsular Device for Oral Pulsatile Delivery Based on Swellable/Erodible Polymers , 2011, AAPS PharmSciTech.

[24]  A. Basit,et al.  A paradigm shift in enteric coating: achieving rapid release in the proximal small intestine of man. , 2010, Journal of controlled release : official journal of the Controlled Release Society.

[25]  F. Chiellini,et al.  Materials degradation in PVC medical devices, DEHP leaching and neonatal outcomes. , 2010, Current medicinal chemistry.

[26]  F. Baldi,et al.  Rheological behaviour of nano-composites based on polyamide 6 under shear and elongational flow at high strain rates , 2009 .

[27]  A. Basit,et al.  Gut instincts: explorations in intestinal physiology and drug delivery. , 2008, International journal of pharmaceutics.

[28]  M. Hakkarainen,et al.  Migration resistant polymeric plasticizer for poly(vinyl chloride) , 2007 .

[29]  J. Remon,et al.  Production of enteric capsules by means of hot-melt extrusion. , 2005, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[30]  P. Ramesh,et al.  Use of Polymeric Plasticizers in Polyvinyl Chloride to Reduce Conventional Plasticizer Migration for Critical Applications , 2004 .

[31]  Iqbal,et al.  Starch capsules: an alternative system for oral drug delivery. , 2000, Pharmaceutical science & technology today.

[32]  David Attwood,et al.  An in vitro assessment of liquid-filled capill® potato starch capsules with biphasic release characteristics , 1996 .

[33]  Andrea Gazzaniga,et al.  Oral colon-specific drug delivery: Design strategies , 1994 .

[34]  H. Laun Orientation effects and rheology of short glass fiber-reinforced thermoplastics , 1984 .