Percussion drilling of metals using bursts of nanosecond pulses.

The effect of ns bursting on percussion drilling of metal is investigated experimentally and analytically, and compared with the efficiency and quality of drilling using single ns pulses. Key advantages are demonstrated, correlating well with the results from a thermal theoretical model. The 1064 nm bursts contain up to 14 pulses of various pulse widths and spacing, and at frequencies of tens of MHz within the burst. The individual pulses have pulse widths of 10 to 200 ns, and up to 12 kW peak power. Burst repetition frequency is single shot to 500 kHz.

[1]  A. Tünnermann,et al.  Plasma evolution during metal ablation with ultrashort laser pulses. , 2005, Optics express.

[2]  Brent C. Stuart,et al.  Optical ablation by high-power short-pulse lasers , 1996 .

[3]  S. Nikumb,et al.  Application of a pulse programmable fiber laser to a broad range of micro-processing applications , 2010 .

[4]  Hans Herfurth,et al.  Micromachining with tailored nanosecond pulses , 2007, Photonics North.

[5]  R. Russo,et al.  Experimental investigation of ablation efficiency and plasma expansion during femtosecond and nanosecond laser ablation of silicon , 2005 .

[6]  Barry Luther-Davies,et al.  Picosecond high-repetition-rate pulsed laser ablation of dielectrics: the effect of energy accumulation between pulses , 2005 .

[7]  Andreas Ruf,et al.  Fundamental aspects in machining of metals with short and ultrashort laser pulses , 2004, SPIE LASE.

[8]  B. R. Campbell,et al.  A study of material removal rates using the double pulse format with nanosecond pulse laser on metals , 2008 .

[9]  Pascal Deladurantaye,et al.  Material micromachining using a pulsed fiber laser platform with fine temporal nanosecond pulse shaping capability , 2009, LASE.

[10]  Niels Schilling,et al.  Pulse shape control of a MOPA fiber laser for marking of stainless steel and other materials , 2010 .

[11]  P. S. Banks,et al.  Double-pulse machining as a technique for the enhancement of material removal rates in laser machining of metals , 2005 .

[12]  Sami T. Hendow,et al.  Dynamic pulsing of a MOPA fiber laser for enhanced material processing , 2011, LASE.

[13]  S. Hendow,et al.  Structuring materials with nanosecond laser pulses. , 2010, Optics express.

[14]  Sami T. Hendow,et al.  MOPA fiber laser with controlled pulse width and peak power for optimizing micromachining applications , 2010, LASE.

[15]  Sami T. Hendow,et al.  Influence of Peak Power and ns Pulse Duration on Micromachining , 2011 .