Thiosulfate leaching of gold—A review

Abstract The ammoniacal thiosulfate leaching process for gold and silver extraction has been reviewed in terms of leaching mechanism, thermodynamics, thiosulfate stability, and gold recovery options. The application to different ore types and process options have also been discussed. The thiosulfate leaching process it catalysed by copper and has several advantages over the conventional cyanidation process. Thiosulfate leaching can be considered a non-toxic process, the gold dissolution rates can be faster than conventional cyanidation and, due to the decreased interference of foreign cations, high gold recoveries can be obtained from the thiosulfate leaching of complex and carbonaceous-type ores. In addition, thiosulfate can be cheaper than cyanide. The chemistry of the ammonia-thiosulfate - copper system is complicated due to the simultaneous presence of complexing ligands such as ammonia and thiosulfate, the Cu(II)Cu(I) redox couple and the stability of thiosulfate in solution. However, by maintaining suitable concentrations of thiosulfate, ammonia, copper and oxygen in the leach solution, and consequently, suitable Eh and pH conditions, thiosulfate leaching can be made practical. Generally the thiosulfate leaching conditions reported in the literature are severe with high reagent consumption. Further investigations are required on leaching under low reagent concentrations over extended periods where reagent consumption is low. For high grade ores or refractory sulfide ores where some pretreatment processing is required to liberate gold, the in-situ generation of thiosulfate should be investigated in more detail. This may lessen thiosulfate consumption and liberate more gold through the oxidation of host sulfide minerals. Cementation (or metal displacement), resins and to a limited extent, activated carbon can be used to recovery gold from thiosulfate solutions. The use of resins to recover gold from solution appears to show some promise, however more work is required to develop suitable elution and recovery methods, and greater selectivity over copper. While difficulties remain to be overcome, thiosulfate leaching has considerable potential as an effective and less hazardous procedure for gold and silver extraction from auriferous ores.

[1]  G. Rempel,et al.  Kinetics and mechanism of the oxidation of thiosulphate ions by copper(II) ions in aqueous ammonia solution , 1973 .

[2]  I. Villegas,et al.  Electro-oxidation of thiosulphate ion on gold: Study by means of cyclic voltammetry and auger electron spectroscopy , 1988 .

[3]  T. Fujita,et al.  GOLD EXTRACTION FROM A COPPER BEARING ORE BY THIOSULPHATE LEACHING , 1996 .

[4]  P. Prasad,et al.  Leaching of gold and silver from Miller Process dross through non-cyanide leachants , 1996 .

[5]  Paul A. Kohl,et al.  Electrochemical Study of the Gold Thiosulfate Reduction , 1997 .

[6]  R. Hancock,et al.  Linear free energy relationships in aqueous complex-formation reactions of the d10 metal ions☆ , 1974 .

[7]  R. P. Foster,et al.  The mobility of gold in tropical rain forest soils; reply , 1993 .

[8]  C. L. Chakrabarti,et al.  Kinetics of decomposition of tetrathionate, trithionate, and thiosulfate in alkaline media. , 1982, Environmental science & technology.

[9]  G. Rempel,et al.  Activation of copper(II) ammine complexes by molecular oxygen for the oxidation of thiosulphate ions , 1975 .

[10]  G. Rempel,et al.  The oxidation of thiosulfate in aqueous ammonia by copper (II) oxygen complexes , 1973 .

[11]  G. Lapidus,et al.  The leaching of silver sulfide with the thiosulfate–ammonia–cupric ion system , 1998 .

[12]  Jin Zhao,et al.  Extraction of gold from thiosulfate solutions with alkyl phosphorus esters , 1997 .

[13]  S. Raghavan,et al.  Gold and silver extraction by ammoniacal thiosulfate leaching from a rhyolite ore , 1988 .

[14]  Francesco Vegliò,et al.  Thiosulphate leaching for gold hydrometallurgy , 1995 .

[15]  N. N. Greenwood,et al.  Chemistry of the elements , 1984 .

[16]  J. W. Langhans,et al.  Copper-catalyzed thiosulfate leaching of low-grade gold ores , 1992 .

[17]  A. Trotman‐Dickenson,et al.  ‘Comprehensive’ Inorganic Chemistry , 1958, Nature.

[18]  Beat Meyer,et al.  Sulfur, Energy and Environment , 1977 .

[19]  E. Guerra,et al.  A study of the factors affecting copper cementation of gold from ammoniacal thiosulphate solution , 1999 .

[20]  T. Okabe,et al.  The Chemical Behavior of Low Valence Sulfur Compounds. V. Decomposition and Oxidation of Tetrathionate in Aqueous Ammonia Solution , 1970 .

[21]  J. T. Woodcock,et al.  Cyanide and Other Lixiviant Leaching Systems for Gold with Some Practical Applications , 1995 .

[22]  F. Vegliò,et al.  Thiosulfate leaching for gold hydrometallurgy. Hydrometallurgy 39, 265-276 , 1995 .

[23]  T. Deng,et al.  Leaching and recovery of cold in thiosulfate based system - A research summary at ICM , 1996 .

[24]  M. Benedetti,et al.  Mechanism of gold transfer and deposition in a supergene environment , 1991 .

[25]  J. Webster.  The solubility of gold and silver in the system AuAgSO2H2O at 25°C and 1 atm. , 1986 .

[26]  Jin Zhao,et al.  Extraction of gold from thiosulfate solutions using amine mixed with neutral donor reagents , 1998 .

[27]  G. M. Ritcey,et al.  Recovery of Gold from Thiourea, Thiocyanate, or Thiosulfate Solutions by Reduction-Precipitation with a Stabilized Form of Sodium Borohydride , 1991 .

[28]  M. Goldhaber.  Experimental study of metastable sulfur oxyanion formation during pyrite oxidation at pH 6-9 and 30 degrees C , 1983 .

[29]  H. W. Lakin,et al.  Geochemistry of gold in the weathering cycle , 1974 .

[30]  J Brent Hiskey,et al.  Dissolution Chemistry of Gold and Silver in Different Lixiviants , 1988 .

[31]  R. J. Tykodi.  In praise of thiosulfate , 1990 .

[32]  I. Ivanov,et al.  Two-stage microbial leaching of a refractory gold-bearing pyrite ore☆ , 1996 .

[33]  S. Dhawale.  Thiosulfate: An Interesting Sulfur Oxoanion that is Useful in Both Medicine and Industry-But is Implicated in Corrosion , 1993 .

[34]  P. Maccarthy.  Critical stability constants, volume 5: First supplement , 1985 .

[35]  B. A. Wills.  XVI international mineral processing congress , 1988 .

[36]  D. Murthy.  Some studies on the extraction of gold and silver from lead-zinc sulfide flotation tailings through non-cyanide leachants , 1991 .

[37]  J. Hendrix,et al.  Affinity of activated carbon towards some gold(I) complexes , 1990 .

[38]  J. Shibata,et al.  Preferential leaching of cobalt, nickel and copper from cobalt-rich ferromanganese crusts with ammoniacal solutions using ammonium thiosulfate and ammonium sulfite as reducing agents , 1996 .

[39]  D. Macdonald.  Review of mechanistic analysis by electrochemical impedance spectroscopy , 1990 .