Investigation on High-deposition-rate Directed Energy Deposition of Al-5%Mg Alloy Via External Compound Magnetic Fields

[1]  A. Ludwig,et al.  Dendrite fragmentation mechanism under forced convection condition by rotating magnetic field during unidirectional solidification of AlSi7 alloy , 2022, Acta Materialia.

[2]  Tianqiu Xu,et al.  Research on high efficiency deposition method of titanium alloy based on double-hot-wire arc additive manufacturing and heat treatment , 2022, Journal of Manufacturing Processes.

[3]  D. Wexler,et al.  Effects of synchronized magnetic arc oscillation on microstructure, texture, grain boundary and mechanical properties of wire arc additively manufactured Ti6Al4V alloy , 2022, Additive Manufacturing.

[4]  Xiao-nan Wang,et al.  Study on droplet transition behavior, bead geometric characteristics and formability of wire + arc additively manufactured Inconel 718 alloy by using CMT MIX+ Synchropulse process , 2022, Journal of Materials Research and Technology.

[5]  A. Bracarense,et al.  Effect of electromagnetic arc constriction applied in GTAW-based wire arc additive manufacturing on walls' geometry and microstructure , 2021, Journal of Manufacturing Processes.

[6]  D. Wexler,et al.  Tailoring the surface finish, dendritic microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy by magnetic arc oscillation , 2021, Additive Manufacturing.

[7]  Jinyi Wang,et al.  Investigation into the arc profiles and penetration ability of axial magnetic field-enhanced K-TIG welding by means of a specially designed sandwich , 2021 .

[8]  Yangfan Wang,et al.  Effect of magnetic Field on the microstructure and mechanical properties of inconel 625 superalloy fabricated by wire arc additive manufacturing , 2021 .

[9]  Bo Chen,et al.  Influence of alternating magnetic field on microstructure and mechanical properties of laser-MIG hybrid welded HG785D steel joint , 2020 .

[10]  Bintao Wu,et al.  Effect of Magnetic Arc Oscillation on the geometry of single-pass multi-layer walls and the process stability in wire and arc additive manufacturing , 2020 .

[11]  Chuansong Wu,et al.  Experimental measurement of fluid flow in high-speed GMAW assisted by transverse magnetic field , 2020 .

[12]  Chuansong Wu,et al.  Numerical analysis of arc and droplet behaviors in gas metal arc welding with external compound magnetic field , 2020 .

[13]  Chuansong Wu,et al.  Study of high-speed pulsed gas metal arc welding assisted by external magnetic-field , 2020, Science and Technology of Welding and Joining.

[14]  Chuansong Wu,et al.  Numerical simulations of arc plasma under external magnetic field-assisted gas metal arc welding , 2020, AIP Advances.

[15]  D. Raabe,et al.  Steels in additive manufacturing: A review of their microstructure and properties , 2020 .

[16]  C. Li,et al.  Study on Microstructural and Mechanical Properties of an Al–Cu–Sn Alloy Wall Deposited by Double-Wire Arc Additive Manufacturing Process , 2019, Materials.

[17]  X. Fang,et al.  Pore formation and evolution in wire + arc additively manufactured 2319 Al alloy , 2019 .

[18]  Yusheng Shi,et al.  Improved mechanical properties of AlSi7Mg/nano-SiCp composites fabricated by selective laser melting , 2019, Journal of Alloys and Compounds.

[19]  Bojin Qi,et al.  Microstructure and mechanical properties of wire + arc additively manufactured 2024 aluminum alloy components: As-deposited and post heat-treated , 2019, Journal of Manufacturing Processes.

[20]  Xiao Huang,et al.  Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure , 2019, Additive Manufacturing.

[21]  Kun Liu,et al.  Design and cracking susceptibility of additively manufactured Al-Cu-Mg alloys with tandem wires and pulsed arc , 2018, Journal of Materials Processing Technology.

[22]  F. Deschaux-Beaume,et al.  Effect of process parameters on the quality of aluminium alloy Al5Si deposits in wire and arc additive manufacturing using a cold metal transfer process , 2018 .

[23]  Yunlu Jiang,et al.  Arc characteristics and droplet transfer process in CMT welding with a magnetic field , 2018 .

[24]  K. Fezzaa,et al.  Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound , 2018 .

[25]  Ming Gao,et al.  Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source , 2018 .

[26]  Jian Han,et al.  Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V , 2017 .

[27]  Yunlong Chang,et al.  Review on magnetically controlled arc welding process , 2017 .

[28]  P. Grant,et al.  The spatial and temporal distribution of dendrite fragmentation in solidifying Al-Cu alloys under different conditions , 2016 .

[29]  Jialuo Ding,et al.  Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy , 2015 .

[30]  R. Mathiesen,et al.  A synchrotron X-ray radiography study of dendrite fragmentation induced by a pulsed electromagnetic field in an Al–15Cu alloy , 2014 .

[31]  Changmeng Liu,et al.  Microstructural characterization of laser melting deposited Ti–5Al-5Mo–5V–1Cr–1Fe near β titanium alloy , 2013 .

[32]  R. Mathiesen,et al.  A Synchrotron X-Ray Radiography Investigation of Induced Dendrite Fragmentation in Al-15wt%Cu , 2013 .

[33]  G. Gerbeth,et al.  Chimney Formation in Solidifying Ga-25wt pct In Alloys Under the Influence of Thermosolutal Melt Convection , 2013, Metallurgical and Materials Transactions A.

[34]  Baode Sun,et al.  A High-Speed Imaging and Modeling Study of Dendrite Fragmentation Caused by Ultrasonic Cavitation , 2012, Metallurgical and Materials Transactions A.

[35]  Xi Li,et al.  Dendrite fragmentation and columnar-to-equiaxed transition during directional solidification at lower growth speed under a strong magnetic field. , 2012 .

[36]  Paul A. Colegrove,et al.  Measuring the process efficiency of controlled gas metal arc welding processes , 2011 .

[37]  H. W. Kerr,et al.  The humping phenomenon during high speed gas metal arc welding , 2005 .

[38]  Michel Rappaz,et al.  Grain refinement induced by electromagnetic stirring: A dendrite fragmentation criterion , 2004 .

[39]  R. Cochrane,et al.  Deformation of dendrites by fluid flow during rapid solidification , 2001 .

[40]  J. Hunt,et al.  Hydrogen porosity in directionally solidified aluminium–copper alloys: a mathematical model , 2001 .

[41]  S. Lu,et al.  Dendrite fragmentation and the effects of fluid flow in castings , 1997 .

[42]  M. Basaran Dendrite coarsening and microsegregation in Al-Cu alloys , 1981 .

[43]  M. Flemings Solidification processing , 1974, Metallurgical and Materials Transactions B.

[44]  R. B. Williamson,et al.  Crystal Multiplication without Nucleation , 1965, Science.