High‐Entropy Alloy (HEA)‐Coated Nanolattice Structures and Their Mechanical Properties

Nanolattice structure fabricated by two-photon lithography (TPL) is a coupling of size-dependent mechanical properties at micro/nano-scale with structural geometry responses in wide applications of scalable micro/nano-manufacturing. In this work, three-dimensional (3D) polymeric nanolattices are initially fabricated using TPL, then conformably coated with an 80 nm thick high-entropy alloy (HEA) thin film (CoCrFeNiAl0.3) via physical vapor deposition (PVD). 3D atomic-probe tomography (APT) reveals the homogeneous element distribution in the synthesized HEA film deposited on the substrate. Mechanical properties of the obtained composite architectures are investigated via in situ scanning electron microscope (SEM) compression test, as well as finite element method (FEM) at the relevant length scales. The presented HEA-coated nanolattice encouragingly not only exhibits superior compressive specific strength of ≈0.032 MPa kg−1 m3 with density well below 1000 kg m−3, but also shows good compression ductility due to its composite nature. This concept of combining HEA with polymer lattice structures demonstrates the potential of fabricating novel architected metamaterials with tunable mechanical properties.

[1]  L. Valdevit,et al.  Ultralight Metallic Microlattices , 2011, Science.

[2]  J. Greer,et al.  Strong, lightweight, and recoverable three-dimensional ceramic nanolattices , 2014, Science.

[3]  M. Ashby,et al.  Effective properties of the octet-truss lattice material , 2001 .

[4]  R. Ritchie,et al.  A fracture-resistant high-entropy alloy for cryogenic applications , 2014, Science.

[5]  Howon Lee,et al.  Ultralight, ultrastiff mechanical metamaterials , 2014, Science.

[6]  M. Buehler,et al.  The mechanics and design of a lightweight three-dimensional graphene assembly , 2017, Science Advances.

[7]  Lorenzo Valdevit,et al.  Microlattices as architected thin films: Analysis of mechanical properties and high strain elastic recovery , 2013 .

[8]  J. C. Huang,et al.  Bendable bulk metallic glass: Effects of a thin, adhesive, strong, and ductile coating , 2012 .

[9]  Julia R. Greer,et al.  Design and Fabrication of Hollow Rigid Nanolattices via Two‐Photon Lithography , 2014 .

[10]  N. Tao,et al.  Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper , 2011, Science.

[11]  X. Yang,et al.  Alloy Design and Properties Optimization of High-Entropy Alloys , 2012 .

[12]  K. Lu,et al.  Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale , 2009, Science.

[13]  Zhihua Wang,et al.  Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification , 2014 .

[14]  T. Desai,et al.  Osteogenic cell functionality on 3-dimensional nano-scaffolds with varying stiffness , 2017 .

[15]  E. Hall,et al.  The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .

[16]  Stefan Hengsbach,et al.  High-strength cellular ceramic composites with 3D microarchitecture , 2014, Proceedings of the National Academy of Sciences.

[17]  K. Dahmen,et al.  Microstructures and properties of high-entropy alloys , 2014 .

[18]  E. Saiz,et al.  Ultralight, Strong, Three-Dimensional SiC Structures. , 2016, ACS nano.

[19]  Lei Jiang,et al.  Mechanical Properties of Diamond‐Structured Polymer Microlattices Coated with the Silicon Nitride Film   , 2016 .

[20]  Yong-Wei Zhang,et al.  Size Effect Suppresses Brittle Failure in Hollow Cu60Zr40 Metallic Glass Nanolattices Deformed at Cryogenic Temperatures. , 2015, Nano letters.

[21]  Jan Bültmann,et al.  Mechanical response of TiAl6V4 lattice structures manufactured by selective laser melting in quasistatic and dynamic compression tests , 2015 .

[22]  Julia R. Greer,et al.  Ultra-strong architected Cu meso-lattices , 2015 .

[23]  D. Depla,et al.  Structure formation and properties of sputter deposited Nbx-CoCrCuFeNi high entropy alloy thin films , 2015 .

[24]  Julia R. Greer,et al.  Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale , 2010 .

[25]  J. Lewis,et al.  Printing soft matter in three dimensions , 2016, Nature.

[26]  R. Grubbs,et al.  Functionalized 3D Architected Materials via Thiol‐Michael Addition and Two‐Photon Lithography , 2017, Advanced materials.

[27]  D. H. Wen,et al.  Nanoindentation creep behavior in a CoCrFeCuNi high-entropy alloy film with two different structure states , 2015 .

[28]  H. Wadley,et al.  Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness , 2017, Nature.

[29]  C. Tasan,et al.  Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off , 2016, Nature.

[30]  Julia R. Greer,et al.  Protocols for the Optimal Design of Multi‐Functional Cellular Structures: From Hypersonics to Micro‐Architected Materials , 2011 .

[31]  P. Liaw,et al.  Solid-Solution CrCoCuFeNi High-Entropy Alloy Thin Films Synthesized by Sputter Deposition , 2015 .

[32]  D. Depla,et al.  High entropy alloy thin films deposited by magnetron sputtering of powder targets , 2015 .

[33]  Xiaoyu Zheng,et al.  Multiscale metallic metamaterials. , 2016, Nature materials.

[34]  Yanfei Gao,et al.  Thin-film metallic glasses for substrate fatigue-property improvements , 2014 .

[35]  Frank Greer,et al.  Fabrication and deformation of three-dimensional hollow ceramic nanostructures. , 2013, Nature materials.

[36]  J. Chu,et al.  Fabrication and characterizations of thin film metallic glasses: Antibacterial property and durability study for medical application , 2014 .

[37]  Leonardo Sacconi,et al.  Liquid Crystalline Networks toward Regenerative Medicine and Tissue Repair. , 2017, Small.

[38]  L. Valdevit,et al.  Fabrication and Deformation of Metallic Glass Micro‐Lattices , 2014 .

[39]  O. Kraft,et al.  Approaching theoretical strength in glassy carbon nanolattices. , 2016, Nature materials.

[40]  J. Dionne,et al.  Polymer lattices as mechanically tunable 3-dimensional photonic crystals operating in the infrared , 2015 .

[41]  John J. Lewandowski,et al.  High-entropy Al 0.3 CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures , 2017 .

[42]  C. Hierold,et al.  Degradable Magnetic Composites for Minimally Invasive Interventions: Device Fabrication, Targeted Drug Delivery, and Cytotoxicity Tests , 2016, Advanced materials.

[43]  D. Dimiduk,et al.  Sample Dimensions Influence Strength and Crystal Plasticity , 2004, Science.

[44]  M. Ashby,et al.  Micro-architectured materials: past, present and future , 2010, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.