Bonding property between fiber and cementitious matrix: A critical review

[1]  K. Behfarnia,et al.  Microstructural analysis of siderurgical aggregate concrete reinforced with fibers , 2022, Journal of Building Engineering.

[2]  N. Banthia,et al.  Effects of nano-SiO2 coating and induced corrosion of steel fiber on the interfacial bond and tensile properties of ultra-high-performance concrete (UHPC) , 2022, Journal of Building Engineering.

[3]  V. Mechtcherine,et al.  Effect of Alkali Treatment on Physical-Chemical Properties of Sisal Fibers and Adhesion Towards Cement-Based Matrices , 2022, Social Science Research Network.

[4]  Shaowei Hu,et al.  Experimental investigation on the elastic modulus and fracture properties of basalt fiber–reinforced fly ash geopolymer concrete , 2022, Construction and Building Materials.

[5]  S. Setunge,et al.  Microstructural characterisation of cementitious composite incorporating polymeric fibre: A comprehensive review , 2022, Construction and Building Materials.

[6]  Zhiguang Zhou,et al.  Mechanical Properties of Natural as well as Synthetic Fiber Reinforced Concrete: A Review , 2022, Construction and Building Materials.

[7]  Yan-xiang Wang,et al.  Effect of CNTs deposition on carbon fiber followed by amination on the interfacial properties of epoxy composites , 2022, Composite Structures.

[8]  F. Aslani,et al.  Pullout behaviour of shape memory alloy fibres in self-compacting concrete and its relation to fibre surface microtopography in comparison to steel fibres , 2022, Construction and Building Materials.

[9]  Dooyeol Yoo,et al.  Surface refinement of steel fiber using nanosilica and silver and its effect on static and dynamic pullout resistance of reactive powder concrete , 2022, Journal of Building Engineering.

[10]  D. Yan,et al.  Experimental investigation on sing fiber pullout behaviour on steel fiber-matrix of reactive powder concrete (RPC) , 2022, Construction and Building Materials.

[11]  Yu Rui,et al.  Comparative study on the effect of steel and polyoxymethylene fibers on the characteristics of Ultra-High Performance Concrete (UHPC) , 2022, Cement and Concrete Composites.

[12]  Han-long Liu,et al.  Effect of microbially induced calcite precipitation treatment on the bonding properties of steel fiber in ultra-high performance concrete , 2022, Journal of Building Engineering.

[13]  W. Boshoff,et al.  An experimental study on the fatigue failure of steel fibre reinforced concrete at a single fibre level , 2021 .

[14]  Prem Pal Bansal,et al.  A comprehensive review on effects of mineral admixtures and fibers on engineering properties of ultra-high-performance concrete , 2021, Journal of Building Engineering.

[15]  Dooyeol Yoo,et al.  Benefits of chemically treated steel fibers on enhancing the interfacial bond strength from ultra-high-performance concrete , 2021 .

[16]  V. Jokinen,et al.  Effect of the roughness of steel fibre surface on its wettability and the cement paste close to fibre surface , 2021, Construction and Building Materials.

[17]  Yue Li,et al.  Evaluation of the elastic modulus of concrete based on indentation test and multi-scale homogenization method , 2021 .

[18]  Wan Long,et al.  Effect of pine needle fibre reinforcement on the mechanical properties of concrete , 2021 .

[19]  R. Bai,et al.  Tailoring of polyethylene fiber surface by coating silane coupling agent for strain hardening cementitious composite , 2021 .

[20]  T. Pham,et al.  Pullout and flexural performance of silane groups and hydrophilic groups grafted polypropylene fibre reinforced UHPC , 2021 .

[21]  Rabar H. Faraj,et al.  Use of recycled fibers in concrete composites: A systematic comprehensive review , 2021 .

[22]  V. Mechtcherine,et al.  Oxygen plasma modification of carbon fiber rovings for enhanced interaction toward mineral-based impregnation materials and concrete matrices , 2021 .

[23]  M. Kaliske,et al.  A comparative study of micro-mechanical models for fiber pullout behavior of reinforced high performance concrete , 2021 .

[24]  Gustavo de Miranda Saleme Gidrão,et al.  Effect of curing age on pullout behavior of aligned and inclined steel fibers embedded in UHPFRC , 2021 .

[25]  D. Zou,et al.  Interfacial technology for enhancement in steel fiber reinforced cementitious composite from nano to macroscale , 2021 .

[26]  Dooyeol Yoo,et al.  Chelate effect on fiber surface morphology and its benefits on pullout and tensile behaviors of ultra-high-performance concrete , 2021 .

[27]  E. Choi,et al.  Pullout resistance of crimped reinforcing fibers using cold-drawn NiTi SMA wires , 2020 .

[28]  M. Cao,et al.  Establishment of fiber factor for rheological and mechanical performance of polyvinyl alcohol (PVA) fiber reinforced mortar , 2020 .

[29]  A. Makeev,et al.  In-Situ SEM Based Method for Assessing Fiber-Matrix Interface Shear Strength in CFRPs , 2020 .

[30]  J. Puttonen,et al.  Phase contrast tomography to study near-field effects of polypropylene fibres on hardened cement paste , 2020, Cement and Concrete Composites.

[31]  V. Mechtcherine,et al.  Tailoring the crack-bridging behavior of strain-hardening cement-based composites (SHCC) by chemical surface modification of poly(vinyl alcohol) (PVA) fibers , 2020 .

[32]  S. Qian,et al.  Improving the bond between polypropylene fiber and cement matrix by nano calcium carbonate modification , 2020 .

[33]  A. Boccaccini,et al.  A Review on Natural Fiber-Reinforced Geopolymer and Cement-Based Composites , 2020, Materials.

[34]  Aditya Kumar,et al.  Flexural and Tensile Strength of Ultra-High-Performance Concrete with ZnPh-Treated Steel Fibers , 2020 .

[35]  Dooyeol Yoo,et al.  Influence of embedment length on the pullout behavior of steel fibers from ultra-high-performance concrete , 2020 .

[36]  N. Banthia,et al.  Achieving slip-hardening behavior of sanded straight steel fibers in ultra-high-performance concrete , 2020 .

[37]  D. Zou,et al.  Understanding the toughening mechanism of silane coupling agent on the interfacial bonding in steel fiber reinforced cementitious composite. , 2020, ACS applied materials & interfaces.

[38]  Annan Zhou,et al.  A review of mechanical properties of fibre reinforced concrete at elevated temperatures , 2020 .

[39]  Q. Yuan,et al.  Durability of ultra-high performance concrete – A review , 2020, Construction and Building Materials.

[40]  D. Zou,et al.  Multiscale investigation on tensile properties of ultra-high performance concrete with silane coupling agent modified steel fibers , 2020 .

[41]  V. Mechtcherine,et al.  Plasma-generated silicon oxide coatings of carbon fibres for improved bonding to mineral-based impregnation materials and concrete matrices , 2020 .

[42]  C. Chow,et al.  Interfacial performance of aramid, basalt and carbon fiber reinforced polymer bonded concrete exposed to high temperature , 2020 .

[43]  Z. J. Yang,et al.  4D characterisation of damage and fracture mechanisms of ultra high performance fibre reinforced concrete by in-situ micro X-Ray computed tomography tests , 2020 .

[44]  M. Azeem,et al.  Role of electrostatic potential energy in carbon nanotube augmented cement paste matrix , 2019, Construction and Building Materials.

[45]  G. Ruiz,et al.  Rate effect in inclined fibre pull-out for smooth and hooked-end fibres: a numerical study , 2019, International Journal of Fracture.

[46]  Dooyeol Yoo,et al.  Bond-slip response of novel half-hooked steel fibers in ultra-high-performance concrete , 2019, Construction and Building Materials.

[47]  K. Khayat,et al.  Rheological properties of ultra-high-performance concrete — An overview , 2019, Cement and Concrete Research.

[48]  P. Qiao,et al.  On the modeling of tensile behavior of ultra-high performance fiber-reinforced concrete with freezing-thawing actions , 2019, Composites Part B: Engineering.

[49]  Doo-Yeol Yoo,et al.  Effects of fiber shape and distance on the pullout behavior of steel fibers embedded in ultra-high-performance concrete , 2019, Cement and Concrete Composites.

[50]  Hui Li,et al.  Interfacial microstructure and bond strength of nano-SiO2-coated steel fibers in cement matrix , 2019, Cement and Concrete Composites.

[51]  D. Zou,et al.  Strength enhancement of recycled aggregate pervious concrete using a cement paste redistribution method , 2019, Cement and Concrete Research.

[52]  Tao Ji,et al.  Pullout behavior of steel fibers with different shapes from ultra-high performance concrete (UHPC) prepared with granite powder under different curing conditions , 2019, Construction and Building Materials.

[53]  J. Park,et al.  Effect of fiber spacing on dynamic pullout behavior of multiple straight steel fibers in ultra-high-performance concrete , 2019, Construction and Building Materials.

[54]  H. Brouwers,et al.  Predicting the rate effects on hooked-end fiber pullout performance from Ultra-High Performance Concrete (UHPC) , 2019, Cement and Concrete Research.

[55]  Dayakar L. Naik,et al.  Modified pullout test for indirect characterization of natural fiber and cementitious matrix interface properties , 2019, Construction and Building Materials.

[56]  Dooyeol Yoo,et al.  An experimental study on pullout and tensile behavior of ultra-high-performance concrete reinforced with various steel fibers , 2019, Construction and Building Materials.

[57]  S. Hong,et al.  The effect of amino-silane coupling agents having different molecular structures on the mechanical properties of basalt fiber-reinforced polyamide 6,6 composites , 2019, Composites Part B: Engineering.

[58]  Christoph Gehlen,et al.  Critical chloride content in reinforced concrete — An updated review considering Chinese experience , 2019, Cement and Concrete Research.

[59]  Dooyeol Yoo,et al.  Comparative pullout behavior of half-hooked and commercial steel fibers embedded in UHPC under static and impact loads , 2019, Cement and Concrete Composites.

[60]  S. Foster,et al.  Performance of oxygen/argon plasma-treated steel fibres in cement mortar , 2019, Cement and Concrete Composites.

[61]  R. Gilbert,et al.  Steel Fiber-Reinforced Concrete Beams—Part II: Strength, Ductility and Design , 2019, ACI Structural Journal.

[62]  J. Barros,et al.  An experimental study on the corrosion susceptibility of Recycled Steel Fiber Reinforced Concrete , 2019, Cement and Concrete Composites.

[63]  Victor C. Li,et al.  Engineered Cementitious Composites , 2010, Learning and Analytics in Intelligent Systems.

[64]  Chel-Jong Choi,et al.  Fermi-level depinning in metal/Ge interface using oxygen plasma treatment , 2019, Applied Surface Science.

[65]  Jingquan Wang,et al.  Pullout behavior of straight and hooked-end steel fibers in UHPC matrix with various embedded angles , 2018, Construction and Building Materials.

[66]  Lihua Xu,et al.  The pull-out behavior of straight and hooked-end steel fiber from hybrid fiber reinforced cementitious composite: Experimental study and analytical modelling , 2018, Composite Structures.

[67]  S. Priyadharshini,et al.  Effect of embedment length of untreated natural fibres on the bond behaviour in cement mortar , 2018 .

[68]  Hui Li,et al.  Improved interfacial strength of SiO2 coated carbon fiber in cement matrix , 2018, Cement and Concrete Composites.

[69]  G. Peng,et al.  Combined curing as a novel approach to improve resistance of ultra-high performance concrete to explosive spalling under high temperature and its mechanical properties , 2018, Cement and Concrete Research.

[70]  K. Khayat,et al.  How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC? , 2018, Cement and Concrete Composites.

[71]  Enzo Martinelli,et al.  Influence of natural fibers characteristics on the interface mechanics with cement based matrices , 2018 .

[72]  H. Hao,et al.  Enhancing fiber/matrix bonding in polypropylene fiber reinforced cementitious composites by microbially induced calcite precipitation pre-treatment , 2018 .

[73]  Zeyu Lu,et al.  Highly dispersed graphene oxide electrodeposited carbon fiber reinforced cement-based materials with enhanced mechanical properties , 2018 .

[74]  D. Rees,et al.  Bonding Mechanisms and Strength of Steel Fiber–Reinforced Cementitious Composites: Overview , 2018 .

[75]  A. Sadrmomtazi,et al.  Effects of silica fume on mechanical strength and microstructure of basalt fiber reinforced cementitious composites (BFRCC) , 2018 .

[76]  G. Dwivedi,et al.  Effect of fiber treatment on flexural properties of natural fiber reinforced composites: A review , 2017, Egyptian Journal of Petroleum.

[77]  J. González‐Benito,et al.  Surface modification and characterization of basalt fibers as potential reinforcement of concretes , 2018 .

[78]  Hui Li,et al.  Effects of nano-SiO2 on the permeability-related properties of cement-based composites with different water/cement ratios , 2018, Journal of Materials Science.

[79]  I. Patnaikuni,et al.  Chemical durability and performance of modified basalt fiber in concrete medium , 2017 .

[80]  Z. Prošek,et al.  PULLOUT BEHAVIOR OF OXYGEN PLASMA TREATED POLYMER FIBERS FROM CEMENT MATRIX , 2017 .

[81]  M. Barczewski,et al.  Hybrid effects of basalt fibers and basalt powder on thermomechanical properties of epoxy composites , 2017 .

[82]  J. Park,et al.  Fiber pullout behavior of HPFRCC: Effects of matrix strength and fiber type , 2017 .

[83]  Eduardo Júlio,et al.  Influence of concrete strength and steel fibre geometry on the fibre/matrix interface , 2017 .

[84]  Lihua Xu,et al.  Nano-mechanical behavior of the interfacial transition zone between steel-polypropylene fiber and cement paste , 2017 .

[85]  R. Simão,et al.  Evaluation of different surface treatments on fiber post cemented with a self-adhesive system. , 2017, Materials science & engineering. C, Materials for biological applications.

[86]  M. Fan,et al.  Pull-Out Behaviour of Hooked End Steel Fibres Embedded in Ultra-high Performance Mortar with Various W/B Ratios , 2017 .

[87]  V. Mechtcherine,et al.  Mineral-Based Coating of Plasma-Treated Carbon Fibre Rovings for Carbon Concrete Composites with Enhanced Mechanical Performance , 2017, Materials.

[88]  Kamal H. Khayat,et al.  Mechanical Properties of Ultra-High-Performance Concrete Enhanced with Graphite Nanoplatelets and Carbon Nanofibers , 2016 .

[89]  Mizi Fan,et al.  Analysis and modelling of mechanical anchorage of 4D/5D hooked end steel fibres , 2016 .

[90]  S. Amziane,et al.  Flexural behaviour of steel fibre-reinforced concrete under cyclic loading , 2016 .

[91]  Y. Tai,et al.  Performance of deformed steel fibers embedded in ultra-high performance concrete subjected to various pullout rates , 2016 .

[92]  Caijun Shi,et al.  Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cement-based materials (UHSC) , 2016 .

[93]  M. Xu,et al.  Effect of loading rates on pullout behavior of high strength steel fibers embedded in ultra-high performance concrete , 2016 .

[94]  Liang Huang,et al.  Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites , 2016 .

[95]  A. Gibson,et al.  Mechanical properties of Napier grass fibre/polyester composites , 2016 .

[96]  B. Luccioni,et al.  Analysis of steel fibers pull-out. Experimental study , 2015 .

[97]  Jae-Ho Lee,et al.  Predicting pull-out behaviour based on the bond mechanism of arch-type steel fibre in cementitious composite , 2015 .

[98]  V. Corinaldesi,et al.  The influence of expansive agent on the performance of fibre reinforced cement-based composites , 2015 .

[99]  Ligang Tan,et al.  Surface modification of basalt with silane coupling agent on asphalt mixture moisture damage , 2015 .

[100]  G. Zi,et al.  Effect of shrinkage-reducing admixture on biaxial flexural behavior of ultra-high-performance fiber-reinforced concrete , 2015 .

[101]  Jose Maria Kenny,et al.  Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion , 2015 .

[102]  Halit Yazici,et al.  Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar , 2015 .

[103]  Damodar Maity,et al.  Experimental investigation on chemically treated bamboo reinforced concrete beams and columns , 2014 .

[104]  Weiwei Sun,et al.  Mechanical analyses of hooked fiber pullout performance in ultra-high-performance concrete , 2014 .

[105]  A. Barnoush,et al.  Oxygen argon plasma treatment effect on hydrogen uptake in austenitic stainless steels , 2014 .

[106]  C. P. Bobko,et al.  Nano-mechanical properties of internally cured kenaf fiber reinforced concrete using nanoindentation , 2014 .

[107]  D. Hui,et al.  Effects of modifications of bamboo cellulose fibers on the improved mechanical properties of cellulose reinforced poly(lactic acid) composites , 2014 .

[108]  Duy‐Liem Nguyen,et al.  Size and geometry dependent tensile behavior of ultra-high-performance fiber-reinforced concrete , 2014 .

[109]  F. A. Silva,et al.  Mechanical behavior of hybrid steel-fiber self-consolidating concrete: Materials and structural aspects , 2014 .

[110]  P. Withers,et al.  Quantitative X-ray tomography , 2014 .

[111]  Angel M. López-Buendía,et al.  Surface treated polypropylene (PP) fibres for reinforced concrete , 2013 .

[112]  A. Beglarigale,et al.  The effect of alkali–silica reaction on steel fiber–matrix bond characteristics of cement based mortars , 2013 .

[113]  Antoine E. Naaman,et al.  Effect of Ultra-High-Performance Concrete on Pullout Behavior of High-Strength Brass-Coated Straight Steel Fibers , 2013 .

[114]  J. Lukes,et al.  The glass fiber-polymer matrix interface/interphase characterized by nanoscale imaging techniques , 2013 .

[115]  Luc Taerwe,et al.  A semi-analytical model to predict the pull-out behaviour of inclined hooked-end steel fibres , 2013 .

[116]  Tara Sen,et al.  Strengthening of RC beams in flexure using natural jute fibre textile reinforced composite system and its comparative study with CFRP and GFRP strengthening systems , 2013 .

[117]  Nawawi Chouw,et al.  Experimental investigations on bond strength between coconut fibre and concrete , 2013 .

[118]  Murat Tuyan,et al.  Pull-out behavior of single steel fiber from SIFCON matrix , 2012 .

[119]  Ying Wang,et al.  Compressive behaviour of hybrid fiber-reinforced reactive powder concrete after high temperature , 2012 .

[120]  S. Ozcan,et al.  Properties of thermo-chemically surface treated carbon fibers and of their epoxy and vinyl ester composites , 2012 .

[121]  H. Wang,et al.  Influence of corrosion on the interface between zinc phosphate steel fiber and cement , 2012 .

[122]  Kyung-Taek Koh,et al.  Comparative flexural behavior of Hybrid Ultra High Performance Fiber Reinforced Concrete with different macro fibers , 2011 .

[123]  Barzin Mobasher,et al.  Effect of fiber shape and morphology on interfacial bond and cracking behaviors of sisal fiber cement based composites , 2011 .

[124]  M. Tang,et al.  Effect of combination of steel fiber and MgO-type expansive agent on properties of concrete , 2011 .

[125]  Antoine E. Naaman,et al.  Strain-hardening UHP-FRC with low fiber contents , 2011 .

[126]  Masakazu Terai,et al.  Fracture Behavior and Mechanical Properties of Bamboo Reinforced Concrete Members , 2011 .

[127]  A. Aguado,et al.  Predicting the pullout response of inclined hooked steel fibers , 2010 .

[128]  Jin-Keun Kim,et al.  Pullout behavior of inclined steel fiber in an ultra-high strength cementitious matrix , 2010 .

[129]  Parviz Ghoddousi,et al.  Fiber pullout model for aligned hooked-end steel fiber , 2010 .

[130]  C. Hill,et al.  Silane coupling agents used for natural fiber/polymer composites: A review , 2010 .

[131]  Lucie Vandewalle,et al.  Fibre reinforced concrete: new design perspectives , 2009 .

[132]  Zhiliang Zhang,et al.  Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar , 2009 .

[133]  D. Ko,et al.  Evaluation of surface and bonding properties of cold rolled steel sheet pretreated by Ar/O2 atmospheric pressure plasma at room temperature , 2009 .

[134]  François Toutlemonde,et al.  The nano-mechanical signature of Ultra High Performance Concrete by statistical nanoindentation techniques , 2008 .

[135]  Sun Wei,et al.  Preparation of C200 green reactive powder concrete and its static–dynamic behaviors , 2008 .

[136]  K. Bilba,et al.  Silane treatment of bagasse fiber for reinforcement of cementitious composites , 2008 .

[137]  Paul Kiekens,et al.  Non-thermal plasma treatment of textiles , 2008 .

[138]  Ananth Ramaswamy,et al.  Mechanical Properties of Steel Fiber-Reinforced Concrete , 2007 .

[139]  Z. X. Zhang,et al.  Surface modification and characterizations of basalt fibers with non-thermal plasma , 2007 .

[140]  Joseph Khedari,et al.  Development of coconut coir-based lightweight cement board , 2007 .

[141]  Na Lu,et al.  Enhancement of adhesion strength between two AISI 316 L stainless steel plates through atmospheric pressure plasma treatment , 2006 .

[142]  W. J. van Ooij,et al.  Evidence for formation of metallo-siloxane bonds by comparison of dip-coated and electrodeposited silane films , 2006 .

[143]  Christophe Baley,et al.  Application of Interlaminar Tests to Marine Composites. A Literature Review , 2004 .

[144]  C. Thaumaturgo,et al.  Fibre reinforcement and fracture response in geopolymeric mortars , 2003 .

[145]  Antoine E. Naaman,et al.  Engineered Steel Fibers with Optimal Properties for Reinforcement of Cement Composites , 2003 .

[146]  Tadashi Saito,et al.  Measuring and modifying interface properties of PVA fibers in ECC matrix , 2001 .

[147]  D. Chung,et al.  Silane-treated carbon fiber for reinforcing cement , 2001 .

[148]  J. Lamon,et al.  SiC/SiC minicomposites with nanoscale multilayered fibre coatings , 2001 .

[149]  Manjusri Misra,et al.  Surface modifications of natural fibers and performance of the resulting biocomposites: An overview , 2001 .

[150]  Antoine E. Naaman,et al.  Pullout Response of a Smooth Fiber with an End Anchorage , 2000 .

[151]  Mark Alexander,et al.  A review of the work of the RILEM TC 159-ETC: Engineering of the interfacial transition zone in cementitious composites , 2000 .

[152]  N. Dilsiz.  Plasma surface modification of carbon fibers: a review , 2000 .

[153]  Gilles Chanvillard,et al.  Modeling the pullout of wire-drawn steel fibers ? ? This paper was originally submitted to Advanced , 1999 .

[154]  Hwai Chung Wu,et al.  Fiber/cement interface tailoring with plasma treatment , 1999 .

[155]  V. Li,et al.  On Interface Property Characterization and Performance of Fiber Reinforced Cementitious Composites , 1999 .

[156]  Christopher K.Y. Leung,et al.  Micromechanical modeling of softening behavior in steel fiber reinforced cementitious composites , 1998 .

[157]  R. Naslain,et al.  The design of the fibre-matrix interfacial zone in ceramic matrix composites , 1998 .

[158]  K. Gliesche,et al.  Influence of glass fibre/epoxy resin interface on static mechanical properties of unidirectional composites and on fatigue performance of cross ply composites , 1998 .

[159]  Will Hansen,et al.  Pullout behavior of steel fibers from cement-based composites , 1997 .

[160]  D. Chung,et al.  Bond strength and contact electrical resistivity between cement and stainless steel fiber : Their correlation and dependence on fiber surface treatment and curing age , 1997 .

[161]  M. Piggott.  Why interface testing by single-fibre methods can be misleading , 1997 .

[162]  Henrik Stang,et al.  Significance of shrinkage-induced clamping pressure in fiber-matrix bonding in cementitious composite materials , 1996 .

[163]  K. Scrivener,et al.  The percolation of pore space in the cement paste/aggregate interfacial zone of concrete , 1996 .

[164]  Dorel Feldman,et al.  Synthetic fibre-reinforced concrete , 1995 .

[165]  Y. Mai,et al.  Stress transfer in the fibre fragmentation test , 1993, Journal of Materials Science.

[166]  Lawrence E. Kukacka,et al.  Interface between zinc phosphate-deposited steel fibres and cement paste , 1992 .

[167]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[168]  Antoine E. Naaman,et al.  Fiber Pullout and Bond Slip. I: Analytical Study , 1991 .

[169]  S. Shah,et al.  Modeling of fiber toughening in cementitious materials using an R-curve approach , 1991 .

[170]  Victor C. Li,et al.  A micromechanical model of tension-softening and bridging toughening of short random fiber reinforced brittle matrix composites , 1991 .

[171]  Surendra P. Shah,et al.  Pullout Problem: Stress versus Fracture Mechanical Approach , 1990 .

[172]  C. Hsueh,et al.  Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites , 1990 .

[173]  C. Hsueh,et al.  Elastic load transfer from partially embedded axially loaded fibre to matrix , 1988 .

[174]  M. D. Thouless,et al.  Effects of pull-out on the mechanical properties of ceramic-matrix composites , 1988 .

[175]  M. Piggott.  The effect of the interface/interphase on fiber composite properties , 1987 .

[176]  V. Gopalaratnam,et al.  On the Modelling of Inelastic Interfaces in Fibrous Composites , 1987 .

[177]  Antoine E. Naaman,et al.  Analytical Prediction of the Pull-Out Behavior of Steel Fibers in Cement1tious Matrices , 1987 .

[178]  V. S. Gopalaratnam,et al.  Tensile Failure of Steel Fiber‐Reinforced Mortar , 1987 .

[179]  A. Evans,et al.  Failure Mechanisms in Ceramic‐Fiber/Ceramic‐Matrix Composites , 1985 .

[180]  A. Dibenedetto,et al.  Evaluation of surface treatments for fibers in composite materials , 1983 .

[181]  F. Mcgarry,et al.  A microdebonding test for in situ assessment of fibre/matrix bond strength in composite materials , 1980 .

[182]  Surendra P. Shah,et al.  Fracture behavior and analysis of fiber reinforced concrete beams , 1980 .

[183]  M. Maage.  Steel fober bond strengths in cement-based matrixes influenced by surface treatments , 1977 .

[184]  R. Arridge,et al.  The effect of interfacial radial and shear stress on fibre pull-out in composite materials , 1973 .

[185]  P. Lawrence,et al.  Some theoretical considerations of fibre pull-out from an elastic matrix , 1972 .

[186]  D. Mckee,et al.  Surface Areas of Carbon Fibres , 1969, Nature.

[187]  A. Kelly,et al.  Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum , 1965 .

[188]  B. W. Rosen,et al.  Tensile failure of fibrous composites. , 1964 .

[189]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[190]  Antoine E. Naaman,et al.  Effect of mechanical clamping on the pull-out response of hooked steel fibers embedded in cementitious matrices , 2022 .